[Tue Jul 10 07:32:22 2012] Detection parameters:
  Position = (230.7, 298.9) = 18 56 24.74 1 15 52.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.1 +/- 14.7
  Background counts = 34.3
  Rate = 0.01 +/- 0.002

[Tue Jul 10 07:32:22 2012] Off-axis axis estimate = 4.91'
[Tue Jul 10 10:32:07 2012] Using EEF radius (= 8.88 ")to estimate initial spatial extent for simple fitting
[Tue Jul 10 10:32:07 2012] Initial guess for spatial extent in simple fitting = 8.88"
[Tue Jul 10 10:32:07 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.967
[Tue Jul 10 10:32:07 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 8.88"
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src1.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src1.csv
[Tue Jul 10 11:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 10 11:29:18 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Jul 10 11:29:18 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1.csv
[Tue Jul 10 11:29:18 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270301_pi300-10000_cl_pass0_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 12:33:51 2012] Spatial fit model total counts = 799.511000, observed total counts = 640.000000
[Tue Jul 10 12:33:51 2012] Poor agreement between spatial fit and data for source 1
It may help to tweak spatial fit manually
Not incorporating fit results
[Tue Jul 10 12:33:51 2012] Spatial fit model total counts = 623.100000, observed total counts = 623.000000
[Tue Jul 10 12:33:51 2012] Offset between fit and detection position for source 1 = 1.845380 pixels
[Tue Jul 10 12:33:51 2012] Warning, changing simple spatial fit ID from 1 to 8
[Tue Jul 10 12:33:51 2012] 601.996000 total counts/ 417.281000 bgd. counts: snr = 9.042486
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.845380 pixels
  Position = (229.7, 300.5) = 18 56 25.03 1 15 57.6
  Extent = 18.1 (9.7-36.2)", rotation angle = 0
  Source counts = 184.7 +/- 24.5
  Background counts = 417.3
  Rate = 0.02 +/- 0.002
[Tue Jul 10 12:33:51 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 12:33:51 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 12:33:51 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 12:33:51 2012] Source does appear to be extended
[Tue Jul 10 12:33:51 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 12:33:51 2012] Source is confused with source 5
[Tue Jul 10 12:33:51 2012] Source is confused with source 19
[Tue Jul 10 12:33:51 2012] Source is confused with source 20
[Tue Jul 10 12:33:51 2012] Source is confused with source 21
[Tue Jul 10 15:38:41 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Jul 10 15:38:41 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Jul 10 15:38:41 2012] Initial guess for spatial extent in simple fitting = 18.12"
[Tue Jul 10 15:38:41 2012] source mask rpix=4.2, npix_max = 87, mask sum = 81, frac = 0.930
[Tue Jul 10 15:38:41 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 18.12"
[Tue Jul 10 16:31:47 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_src1.ximg exists
[Tue Jul 10 16:31:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 16:31:47 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Jul 10 16:31:47 2012] Warning: model total counts is not > 0 in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_src1.csv
[Tue Jul 10 16:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 16:31:47 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Jul 10 16:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 10 16:31:47 2012] fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Jul 10 16:31:47 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1.csv
[Tue Jul 10 16:31:47 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083270301_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Jul 10 17:08:28 2012] Warning, spatial fit 1 centroid is now closest to src. 21
[Tue Jul 10 17:08:28 2012] Vigneting correction estimate = 1.000000
[Tue Jul 10 17:08:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Jul 10 17:08:28 2012] Assessing source extent using major axis lower bound
[Tue Jul 10 17:08:28 2012] Source does appear to be extended
[Tue Jul 10 17:08:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Jul 10 19:11:02 2012] XMMSAS src. selection expression = ellipse(19933.968000, 26091.450200, 1087.494031, 1087.494031, 0.000000, X, Y)
[Tue Jul 10 19:11:02 2012] Writing source region out to fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1_src.reg
[Tue Jul 10 19:11:02 2012] Extracting stamp from image fullrun_mos1_xmm0083270301_pi300-10000_cl_sm2.00.img.gz, (167, 238) - (292, 363)
[Tue Jul 10 19:11:02 2012] XMMSAS bgd. selection expression = annulus(19933.968000, 26091.450200, 1812.490052, 3624.980104, X, Y) && !ellipse(18908.642822, 25805.891205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20209.167770, 25345.814453, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Jul 10 19:11:02 2012] Writing fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1.gif
[Tue Jul 10 19:11:04 2012] Mean detx,y = (-1624.11, -7531.24) 
[Tue Jul 10 19:11:05 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Jul 10 19:11:27 2012] Binned source spectrum to 10 counts/bin
[Tue Jul 10 19:11:27 2012] Setting source spectrum file to fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 19:11:27 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Jul 10 19:46:15 2012] Updating aperture counts using extracted products
[Tue Jul 10 19:46:15 2012] Error reading totcts from fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Tue Jul 10 19:46:15 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:15 2012] Using photon index=1.80, rate=0.0176, arf fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 19:46:15 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:15 2012] Updating source flux to 2.3e-13
[Tue Jul 10 19:46:17 2012] Flag p found in src. 1 procflags, skipping spectral fitting
[Tue Jul 10 19:46:17 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Tue Jul 10 19:46:40 2012] Reading fit data from xmm0083270301/analysis//spectral/fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1_pl.csv
[Tue Jul 10 19:46:40 2012] Spectral fit parameter nH value = 1.54787e+22
[Tue Jul 10 19:46:40 2012] Spectral fit parameter PhoIndex value = 5.38
[Tue Jul 10 19:46:40 2012] Failed to get F(0.3-8.0) from xmm0083270301/analysis//spectral/fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1_pl.csv, possibly due to different flux energy range selected
[Tue Jul 10 19:46:40 2012] Calculating source flux in energy range 0.30-8.00
[Tue Jul 10 19:46:40 2012] Using Nh = 1.5e+22, photon index=5.38, rate=0.0176, arf fullrun_mos1_xmm0083270301_pi300-10000_pass1_cl_src1.arf
[Tue Jul 10 19:46:40 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jul 10 19:46:40 2012] Updating source flux to 1.7e-13