[Sun May 20 10:49:07 2012] Detection parameters:
  Position = (279.7, 411.0) = 5 35 45.84 -69 9 44.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 452.7 +/- 32.9
  Background counts = 149.3
  Rate = 0.02 +/- 0.002

[Sun May 20 10:49:08 2012] Off-axis axis estimate = 8.27'
[Sun May 20 10:53:23 2012] Using EEF radius (= 10.56 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:53:23 2012] Initial guess for spatial extent in simple fitting = 10.56"
[Sun May 20 10:53:23 2012] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.049
[Sun May 20 10:53:23 2012] Giving source the simple spatial ID 5 for pass 0, mean size = 10.56"
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src5.ximg exists
[Sun May 20 12:20:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src5.csv
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src5_1.ximg exists
[Sun May 20 12:20:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src5.csv
[Sun May 20 12:20:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sun May 20 12:20:06 2012] Fit fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src5 appears to have run properly
[Sun May 20 12:36:23 2012] Spatial fit model total counts = 1537.640000, observed total counts = 1518.000000
[Sun May 20 12:36:23 2012] Offset between fit and detection position for source 5 = 0.637444 pixels
[Sun May 20 12:36:23 2012] 1519.161000 total counts/ 1169.230000 bgd. counts: snr = 10.233694
Spatial fit parameters:
  Offset between fit and detection position for source 5 = 0.637444 pixels
  Position = (279.2, 411.3) = 5 35 46.28 -69 9 43.6
  Extent = 10.9 (9.1-13.3)", rotation angle = 0
  Source counts = 349.9 +/- 39.0
  Background counts = 1169.2
  Rate = 0.02 +/- 0.002
[Sun May 20 12:36:23 2012] Vigneting correction estimate = 1.000000
[Sun May 20 12:36:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 12:36:23 2012] Assessing source extent using major axis lower bound
[Sun May 20 12:36:23 2012] Source does appear to be extended
[Sun May 20 12:36:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 12:36:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 12:36:36 2012] Initial guess for spatial extent in simple fitting = 10.91"
[Sun May 20 12:36:36 2012] source mask rpix=2.5, npix_max = 36, mask sum = 36, frac = 0.995
[Sun May 20 12:36:36 2012] Giving source the simple spatial ID 5 for pass 1, mean size = 10.91"
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src5.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src5.csv
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src5_1.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src5.csv
[Sun May 20 13:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src5.ximg exists
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src5_1.ximg exists
[Sun May 20 13:59:45 2012] Fit fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src5 appears to have run properly
[Sun May 20 14:13:27 2012] Warning, spatial fit 5 centroid is now closest to src. 16
[Sun May 20 14:13:27 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:13:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:13:27 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:13:27 2012] Source does appear to be extended
[Sun May 20 14:13:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:13:39 2012] XMMSAS src. selection expression = ellipse(24240.551600, 35738.076600, 654.648019, 654.648019, 0.000000, X, Y)
[Sun May 20 14:13:39 2012] Writing source region out to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src5_src.reg
[Sun May 20 14:13:39 2012] Extracting stamp from image fullrun_pn_xmm0083250101_pi300-10000_cl_sm2.00.img.gz, (242, 374) - (317, 449)
[Sun May 20 14:13:39 2012] XMMSAS bgd. selection expression = annulus(24240.551600, 35738.076600, 1091.080031, 2182.160063, X, Y) && !ellipse(21422.182953, 36494.218750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21711.640884, 36049.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.948000, 33679.342000, 1463.872042, 1463.872042, 0.000000, X, Y) && !ellipse(24831.049408, 34266.229675, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:13:39 2012] Writing fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src5.gif
[Sun May 20 14:22:37 2012] Mean detx,y = (1556.01, -8123.79) 
[Sun May 20 14:22:43 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 14:23:19 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 14:23:20 2012] Setting source spectrum file to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 14:23:20 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May 20 16:01:43 2012] Updating aperture counts using extracted products
[Sun May 20 16:01:43 2012] Error reading totcts from fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May 20 16:01:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 16:01:44 2012] Using photon index=1.80, rate=0.022, arf fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src5.arf
[Sun May 20 16:01:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 16:01:44 2012] Updating source flux to 8.9e-14