[Sun May 20 10:49:07 2012] Detection parameters:
  Position = (131.2, 403.0) = 5 37 47.01 -69 10 17.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 10626.2 +/- 121.8
  Background counts = 108.8
  Rate = 0.3 +/- 0.004

[Sun May 20 10:49:08 2012] Off-axis axis estimate = 14.30'
[Sun May 20 10:53:23 2012] Using EEF radius (= 13.58 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:53:23 2012] Initial guess for spatial extent in simple fitting = 13.58"
[Sun May 20 10:53:23 2012] source mask rpix=3.1, npix_max = 52, mask sum = 48, frac = 0.915
[Sun May 20 10:53:23 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 13.58"
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src4.ximg exists
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src4_1.ximg exists
[Sun May 20 12:20:06 2012] Fit fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src4 appears to have run properly
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sun May 20 12:20:06 2012] Fit fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sun May 20 12:36:23 2012] Spatial fit model total counts = 9752.380000, observed total counts = 8918.000000
[Sun May 20 12:36:23 2012] Offset between fit and detection position for source 4 = 0.353406 pixels
[Sun May 20 12:36:23 2012] 9762.400000 total counts/ 3737.710000 bgd. counts: snr = 98.544390
Spatial fit parameters:
  Offset between fit and detection position for source 4 = 0.353406 pixels
  Position = (131.5, 402.9) = 5 37 46.73 -69 10 16.9
  Extent = 9.2 (9.0-9.5)", rotation angle = 0
  Source counts = 6024.7 +/- 98.8
  Background counts = 3737.7
  Rate = 0.4 +/- 0.006
[Sun May 20 12:36:23 2012] Vigneting correction estimate = 1.000000
[Sun May 20 12:36:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 12:36:23 2012] Assessing source extent using major axis lower bound
[Sun May 20 12:36:23 2012] Source does appear to be extended
[Sun May 20 12:36:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 12:36:36 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun May 20 12:36:36 2012] Initial guess for spatial extent in simple fitting = 9.22"
[Sun May 20 12:36:36 2012] source mask rpix=2.1, npix_max = 27, mask sum = 28, frac = 1.020
[Sun May 20 12:36:36 2012] Giving source the simple spatial ID 4 for pass 1, mean size = 9.22"
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src4.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src4.csv
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src4_1.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src4.csv
[Sun May 20 13:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sun May 20 13:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 14:13:27 2012] Warning, spatial fit 4 centroid is now closest to src. 8
[Sun May 20 14:13:27 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:13:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:13:27 2012] Assessing source extent using major axis lower bound
[Sun May 20 14:13:27 2012] Source does appear to be extended
[Sun May 20 14:13:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:13:39 2012] Counts = 6024.690000, rescaling region sizes by 2.000000
[Sun May 20 14:13:39 2012] XMMSAS src. selection expression = ellipse(11392.352200, 35006.913800, 1106.388032, 1106.388032, 0.000000, X, Y)
[Sun May 20 14:13:39 2012] Writing source region out to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4_src.reg
[Sun May 20 14:13:39 2012] Extracting stamp from image fullrun_pn_xmm0083250101_pi300-10000_cl_sm2.00.img.gz, (68, 339) - (195, 467)
[Sun May 20 14:13:39 2012] XMMSAS bgd. selection expression = annulus(11392.352200, 35006.913800, 3687.960106, 7375.920212, X, Y) && !ellipse(10928.271919, 34396.352661, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(16704.947266, 31199.426575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10501.057793, 35332.707153, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19035.960000, 34208.517600, 2620.288075, 1520.840044, 304.902000, X, Y) && !ellipse(19421.460403, 34580.797546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18725.480000, 34105.370000, 1310.144038, 1310.144038, 0.000000, X, Y) && !ellipse(18718.636978, 33529.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(10830.765305, 36724.038086, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:13:39 2012] Writing fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4.gif
[Sun May 20 14:19:50 2012] Mean detx,y = (-10314.72, -12933.22) 
[Sun May 20 14:19:57 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 14:22:17 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 14:22:18 2012] Setting source spectrum file to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 20 14:22:18 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4_bgd.pi.gz
[Sun May 20 16:01:43 2012] Updating aperture counts using extracted products
[Sun May 20 16:01:43 2012] Error reading totcts from fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4_src_b10.pi.gz
[Sun May 20 16:01:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 16:01:44 2012] Using photon index=1.80, rate=0.379, arf fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4.arf
[Sun May 20 16:01:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 16:01:44 2012] Updating source flux to 3.5e-12
[Sun May 20 16:03:47 2012] Reading fit data from xmm0083250101/analysis//spectral/fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4_pl.csv
[Sun May 20 16:03:47 2012] Spectral fit parameter nH value = 5.41358e+21
[Sun May 20 16:03:47 2012] Spectral fit parameter PhoIndex value = 2.67934
[Sun May 20 16:03:47 2012] Failed to get F(0.3-8.0) from xmm0083250101/analysis//spectral/fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4_pl.csv, possibly due to different flux energy range selected
[Sun May 20 16:03:47 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 16:03:47 2012] Using Nh = 5.4e+21, photon index=2.68, rate=0.379, arf fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src4.arf
[Sun May 20 16:03:47 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 16:03:47 2012] Updating source flux to 4.5e-12