[Sun May 20 10:49:07 2012] Detection parameters:
  Position = (301.7, 322.1) = 5 35 27.87 -69 16 11.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 5365.4 +/- 89.7
  Background counts = 208.9
  Rate = 0.2 +/- 0.003

[Sun May 20 10:49:08 2012] Off-axis axis estimate = 1.73'
[Sun May 20 10:53:23 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun May 20 10:53:23 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun May 20 10:53:23 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sun May 20 10:53:23 2012] Giving source the simple spatial ID 3 for pass 0, mean size = 7.29"
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src3.ximg exists
[Sun May 20 12:20:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src3.csv
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src3_1.ximg exists
[Sun May 20 12:20:06 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src3.csv
[Sun May 20 12:20:06 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Sun May 20 12:20:06 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Sun May 20 12:20:06 2012] Fit fullrun_pn_xmm0083250101_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Sun May 20 12:36:23 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.655196 pixels away
[Sun May 20 12:36:23 2012] Vigneting correction estimate = 1.000000
[Sun May 20 12:36:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 12:36:23 2012] Assessing source extent using major
[Sun May 20 12:36:23 2012] Source does appear to be extended
[Sun May 20 12:36:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 12:36:36 2012] Using EEF radius (= 7.29 ")to estimate initial spatial extent for simple fitting
[Sun May 20 12:36:36 2012] Initial guess for spatial extent in simple fitting = 7.29"
[Sun May 20 12:36:36 2012] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.844
[Sun May 20 12:36:36 2012] Giving source the simple spatial ID 3 for pass 1, mean size = 7.29"
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src3.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src3.csv
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src3_1.ximg exists
[Sun May 20 13:59:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src3.csv
[Sun May 20 13:59:45 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src3_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src3.ximg exists
[Sun May 20 13:59:45 2012] fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src3_1.ximg exists
[Sun May 20 13:59:45 2012] Fit fullrun_pn_xmm0083250101_pi300-10000_cl_pass1_tfrozen_src3 appears to have run properly
[Sun May 20 14:13:27 2012] Warning: source 3 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 3 at 10.655196 pixels away
[Sun May 20 14:13:27 2012] Vigneting correction estimate = 1.000000
[Sun May 20 14:13:27 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May 20 14:13:27 2012] Assessing source extent using major
[Sun May 20 14:13:27 2012] Source does appear to be extended
[Sun May 20 14:13:27 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May 20 14:13:39 2012] Counts = 5365.392090, rescaling region sizes by 2.000000
[Sun May 20 14:13:39 2012] XMMSAS src. selection expression = ellipse(26202.433105, 27972.591583, 1305.000000, 1305.000000, 0.000000, X, Y)
[Sun May 20 14:13:39 2012] Writing source region out to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3_src.reg
[Sun May 20 14:13:39 2012] Extracting stamp from image fullrun_pn_xmm0083250101_pi300-10000_cl_sm2.00.img.gz, (227, 247) - (377, 397)
[Sun May 20 14:13:39 2012] XMMSAS bgd. selection expression = annulus(26202.433105, 27972.591583, 4350.000000, 8700.000000, X, Y) && !ellipse(16704.947266, 31199.426575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24240.551600, 35738.076600, 872.864025, 872.864025, 0.000000, X, Y) && !ellipse(20952.054260, 31592.453217, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24421.065094, 25521.043732, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21422.182953, 36494.218750, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21711.640884, 36049.626129, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19035.960000, 34208.517600, 2620.288075, 1520.840044, 304.902000, X, Y) && !ellipse(19421.460403, 34580.797546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25807.948000, 33679.342000, 1463.872042, 1463.872042, 0.000000, X, Y) && !ellipse(24831.049408, 34266.229675, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18725.480000, 34105.370000, 1310.144038, 1310.144038, 0.000000, X, Y) && !ellipse(18718.636978, 33529.655518, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.002655, 31797.078979, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25039.004578, 31173.802887, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24581.128845, 26586.934448, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24579.726990, 24139.350555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24893.161163, 23809.038361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25465.009338, 23419.033142, 870.000000, 870.000000, 0.000000, X, Y)
[Sun May 20 14:13:39 2012] Writing fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3.gif
[Sun May 20 14:16:16 2012] Mean detx,y = (56.59, -202.59) 
[Sun May 20 14:16:24 2012] Setting backscal keywords in source and bgd. spectrum
[Sun May 20 14:19:22 2012] Binned source spectrum to 10 counts/bin
[Sun May 20 14:19:22 2012] Setting source spectrum file to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 20 14:19:22 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3_bgd.pi.gz
[Sun May 20 14:43:41 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May 20 14:43:41 2012] rmf not generated due to insufficient counts
[Sun May 20 16:01:43 2012] Updating aperture counts using extracted products
[Sun May 20 16:01:43 2012] Error reading totcts from fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3_src_b10.pi.gz
[Sun May 20 16:01:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun May 20 16:01:44 2012] Using photon index=1.80, rate=0.189, arf fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3.arf
[Sun May 20 16:01:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May 20 16:01:44 2012] Updating source flux to 4.4e-13
[Sun May 20 16:02:00 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May 20 16:03:47 2012] xmm0083250101/analysis//spectral/fullrun_pn_xmm0083250101_pi300-10000_pass1_cl_src3_pl.csv not found, spectral fit skipped or did not complete