[Fri May  3 16:21:56 2013] Detection parameters:
  Position = (171.9, 353.6) = 9 12 2.71 5 56 37.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 124.1 +/- 15.9
  Background counts = 103.6
  Rate = 0.008 +/- 0.001

[Fri May  3 16:21:57 2013] Off-axis axis estimate = 10.01'
[Fri May  3 16:23:32 2013] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:23:32 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 16:23:32 2013] Initial guess for spatial extent in simple fitting = 11.43"
[Fri May  3 16:23:32 2013] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.792
[Fri May  3 16:23:32 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 11.43"
[Fri May  3 16:32:40 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_src2.ximg exists
[Fri May  3 16:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_src2.csv
[Fri May  3 16:32:41 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_src2_1.ximg exists
[Fri May  3 16:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_src2.csv
[Fri May  3 16:32:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:32:41 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Fri May  3 16:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May  3 16:32:41 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Fri May  3 16:32:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_tfrozen_src2.csv
[Fri May  3 16:32:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083240201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 16:56:47 2013] Spatial fit model total counts = 653.478000, observed total counts = 454.000000
[Fri May  3 16:56:47 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 16:56:47 2013] Vigneting correction estimate = 1.000000
[Fri May  3 16:56:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 16:56:47 2013] Assessing source extent using major
[Fri May  3 16:56:47 2013] Source does appear to be extended
[Fri May  3 16:56:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 16:56:55 2013] Using EEF radius (= 11.43 ")to estimate initial spatial extent for simple fitting
[Fri May  3 16:56:55 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Fri May  3 16:56:55 2013] Initial guess for spatial extent in simple fitting = 11.43"
[Fri May  3 16:56:55 2013] source mask rpix=2.6, npix_max = 39, mask sum = 31, frac = 0.792
[Fri May  3 16:56:55 2013] Giving source the simple spatial ID 1 for pass 1, mean size = 11.43"
[Fri May  3 17:05:29 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_src1.ximg exists
[Fri May  3 17:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_src1.csv
[Fri May  3 17:05:29 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_src1_1.ximg exists
[Fri May  3 17:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_src1.csv
[Fri May  3 17:05:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:05:29 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Fri May  3 17:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May  3 17:05:29 2013] fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Fri May  3 17:05:29 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_tfrozen_src1.csv
[Fri May  3 17:05:29 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083240201_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri May  3 17:29:47 2013] Spatial fit model total counts = 653.478000, observed total counts = 454.000000
[Fri May  3 17:29:47 2013] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri May  3 17:29:47 2013] Vigneting correction estimate = 1.000000
[Fri May  3 17:29:47 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri May  3 17:29:47 2013] Assessing source extent using major
[Fri May  3 17:29:47 2013] Source does appear to be extended
[Fri May  3 17:29:47 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Fri May  3 17:29:57 2013] XMMSAS src. selection expression = ellipse(14903.480682, 30712.380035, 652.500000, 652.500000, 0.000000, X, Y)
[Fri May  3 17:29:57 2013] Writing source region out to fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2_src.reg
[Fri May  3 17:29:57 2013] Extracting stamp from image fullrun_pn_xmm0083240201_pi300-10000_cl_sm2.00.img.gz, (134, 316) - (209, 391)
[Fri May  3 17:29:57 2013] XMMSAS bgd. selection expression = annulus(14903.480682, 30712.380035, 1087.500000, 2175.000000, X, Y) && !ellipse(17669.816772, 30474.200012, 870.000000, 870.000000, 0.000000, X, Y)
[Fri May  3 17:29:57 2013] Writing fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2.gif
[Fri May  3 17:30:02 2013] Mean detx,y = (7976.30, 9441.31) 
[Fri May  3 17:30:04 2013] Setting backscal keywords in source and bgd. spectrum
[Fri May  3 17:30:27 2013] Binned source spectrum to 10 counts/bin
[Fri May  3 17:30:27 2013] Setting source spectrum file to fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Fri May  3 17:30:27 2013] Setting bgd. spectrum file to fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Fri May  3 17:34:23 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Fri May  3 17:34:23 2013] rmf not generated due to insufficient counts
[Fri May  3 18:00:53 2013] Updating aperture counts using extracted products
[Fri May  3 18:00:53 2013] Total counts from fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 198.00
[Fri May  3 18:00:53 2013] Total counts from fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2_bgd.pi.gz = 1613.00
[Fri May  3 18:00:53 2013] Got source and background scale factors 934293.000000, 9767048.000000
[Fri May  3 18:00:53 2013] User source parameters:
  Position = (171.9, 353.6) = 9 12 2.71 5 56 37.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 43.7 +/- 15.1
  Background aperture counts = 154.3
  Rate = 0.007 +/- 0.002

[Fri May  3 18:00:53 2013] Updating counts from extracted products
[Fri May  3 18:00:53 2013] Set source signif. to 43.70/12.42 = 3.52
[Fri May  3 18:00:55 2013] Calculating source flux in energy range 0.30-8.00
[Fri May  3 18:00:55 2013] Using photon index=1.80, rate=0.00682, arf fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2.arf
[Fri May  3 18:00:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Fri May  3 18:00:55 2013] Updating source flux to 3.9e-14
[Fri May  3 18:01:02 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Fri May  3 18:01:04 2013] xmm0083240201/analysis//spectral/fullrun_pn_xmm0083240201_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete