[Sat Jun 22 01:04:40 2013] Detection parameters:
  Position = (298.2, 335.0) = 16 59 46.03 32 37 50.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 114.9 +/- 16.1
  Background counts = 36.6
  Rate = 0.02 +/- 0.003

[Sat Jun 22 01:04:40 2013] Off-axis axis estimate = 2.65'
[Sat Jun 22 01:07:11 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:07:11 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Sat Jun 22 01:07:11 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Sat Jun 22 01:07:11 2013] Giving source the simple spatial ID 5 for pass 0, mean size = 7.75"
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src5.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src5.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src5_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src5.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src5.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src5.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src5_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src5.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 02:54:12 2013] Warning: source 5 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 10.962272 pixels away
[Sat Jun 22 02:54:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 02:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 02:54:12 2013] Assessing source extent using major
[Sat Jun 22 02:54:12 2013] Source does appear to be extended
[Sat Jun 22 02:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 02:54:30 2013] Using EEF radius (= 7.75 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 02:54:30 2013] Initial guess for spatial extent in simple fitting = 7.75"
[Sat Jun 22 02:54:30 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.768
[Sat Jun 22 02:54:30 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.75"
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 03:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 03:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:40:07 2013] Source 5 is offset by -1.880711 and 4.295180 pixels which is larger than
2 X fitted extent = 1.333894 x 1.333894, not incorporating fit results
[Sat Jun 22 04:40:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:40:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:40:07 2013] Assessing source extent using major
[Sat Jun 22 04:40:07 2013] Source does appear to be extended
[Sat Jun 22 04:40:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:40:17 2013] XMMSAS src. selection expression = ellipse(25893.167328, 29092.238678, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:40:17 2013] Writing source region out to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5_src.reg
[Sat Jun 22 04:40:17 2013] Extracting stamp from image fullrun_pn_xmm0083150801_pi300-10000_cl_sm2.00.img.gz, (261, 297) - (336, 372)
[Sat Jun 22 04:40:17 2013] XMMSAS bgd. selection expression = annulus(25893.167328, 29092.238678, 1087.500000, 2175.000000, X, Y) && !ellipse(26402.167020, 27857.141200, 1043.400030, 911.000026, 54.942700, X, Y) && !ellipse(27421.651764, 28479.444641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.020203, 26927.951721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.982178, 28787.351044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24826.814636, 27707.006348, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:40:17 2013] Writing fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5.gif
[Sat Jun 22 04:45:12 2013] Mean detx,y = (-18.21, -1523.05) 
[Sat Jun 22 04:45:15 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 04:45:38 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 04:45:38 2013] Setting source spectrum file to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sat Jun 22 04:45:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sat Jun 22 04:57:18 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jun 22 04:57:18 2013] rmf not generated due to insufficient counts
[Sat Jun 22 06:04:41 2013] Updating aperture counts using extracted products
[Sat Jun 22 06:04:41 2013] Total counts from fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 498.00
[Sat Jun 22 06:04:41 2013] Total counts from fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5_bgd.pi.gz = 1065.00
[Sat Jun 22 06:04:41 2013] Got source and background scale factors 1010995.000000, 5269047.000000
[Sat Jun 22 06:04:41 2013] User source parameters:
  Position = (298.2, 335.0) = 16 59 46.03 32 37 50.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 293.7 +/- 23.3
  Background aperture counts = 204.3
  Rate = 0.05 +/- 0.004

[Sat Jun 22 06:04:41 2013] Updating counts from extracted products
[Sat Jun 22 06:04:41 2013] Set source signif. to 293.65/14.29 = 20.54
[Sat Jun 22 06:04:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 06:04:44 2013] Using photon index=1.80, rate=0.0525, arf fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5.arf
[Sat Jun 22 06:04:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 06:04:44 2013] Updating source flux to 1.5e-13
[Sat Jun 22 06:04:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 06:04:57 2013] xmm0083150801/analysis//spectral/fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete