[Sat Jun 22 01:04:40 2013] Detection parameters:
  Position = (285.9, 319.0) = 16 59 50.25 32 36 50.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 66.9 +/- 14.1
  Background counts = 41.5
  Rate = 0.01 +/- 0.002

[Sat Jun 22 01:04:40 2013] Off-axis axis estimate = 1.75'
[Sat Jun 22 01:07:11 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:07:11 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Jun 22 01:07:11 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Jun 22 01:07:11 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.30"
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src13.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src13_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src13.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src13.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src13.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 02:54:12 2013] Warning: source 13 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 13 at 10.138720 pixels away
[Sat Jun 22 02:54:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 02:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 02:54:12 2013] Assessing source extent using major
[Sat Jun 22 02:54:12 2013] Source does appear to be extended
[Sat Jun 22 02:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 02:54:30 2013] Using EEF radius (= 7.30 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 02:54:30 2013] Initial guess for spatial extent in simple fitting = 7.30"
[Sat Jun 22 02:54:30 2013] source mask rpix=1.7, npix_max = 18, mask sum = 16, frac = 0.843
[Sat Jun 22 02:54:30 2013] Giving source the simple spatial ID 10 for pass 1, mean size = 7.30"
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src10.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src10.csv
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src10_1.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src10.csv
[Sat Jun 22 03:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src10.csv
[Sat Jun 22 03:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:40:07 2013] Source 13 is offset by -5.305970 and -0.404493 pixels which is larger than
2 X fitted extent = 0.839315 x 0.872464, not incorporating fit results
[Sat Jun 22 04:40:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:40:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:40:07 2013] Assessing source extent using major
[Sat Jun 22 04:40:07 2013] Source does appear to be extended
[Sat Jun 22 04:40:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:40:17 2013] XMMSAS src. selection expression = ellipse(24826.814636, 27707.006348, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:40:17 2013] Writing source region out to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13_src.reg
[Sat Jun 22 04:40:17 2013] Extracting stamp from image fullrun_pn_xmm0083150801_pi300-10000_cl_sm2.00.img.gz, (248, 282) - (323, 357)
[Sat Jun 22 04:40:17 2013] XMMSAS bgd. selection expression = annulus(24826.814636, 27707.006348, 1087.500000, 2175.000000, X, Y) && !ellipse(26402.167020, 27857.141200, 1043.400030, 911.000026, 54.942700, X, Y) && !ellipse(25893.167328, 29092.238678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.651764, 28479.444641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.020203, 26927.951721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25135.982178, 28787.351044, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24637.983643, 25123.641602, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:40:17 2013] Writing fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13.gif
[Sat Jun 22 04:48:34 2013] Mean detx,y = (-1343.78, -482.70) 
[Sat Jun 22 04:48:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 04:49:08 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 04:49:09 2013] Setting source spectrum file to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13_src_b10.pi.gz
[Sat Jun 22 04:49:09 2013] Setting bgd. spectrum file to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13_bgd.pi.gz
[Sat Jun 22 05:05:46 2013] Not generating rmf since there are only 66 counts
[Sat Jun 22 05:05:46 2013] rmf not generated due to insufficient counts
[Sat Jun 22 06:04:43 2013] Updating aperture counts using extracted products
[Sat Jun 22 06:04:43 2013] Total counts from fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13_src_b10.pi.gz = 508.00
[Sat Jun 22 06:04:43 2013] Total counts from fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13_bgd.pi.gz = 1167.00
[Sat Jun 22 06:04:43 2013] Got source and background scale factors 1142368.000000, 5245032.000000
[Sat Jun 22 06:04:43 2013] User source parameters:
  Position = (285.9, 319.0) = 16 59 50.25 32 36 50.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 253.8 +/- 23.6
  Background aperture counts = 254.2
  Rate = 0.05 +/- 0.004

[Sat Jun 22 06:04:43 2013] Updating counts from extracted products
[Sat Jun 22 06:04:43 2013] Set source signif. to 253.83/15.94 = 15.92
[Sat Jun 22 06:04:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 06:04:44 2013] Using photon index=1.80, rate=0.0454, arf fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13.arf
[Sat Jun 22 06:04:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 06:04:44 2013] Updating source flux to 1.5e-13
[Sat Jun 22 06:04:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 06:04:57 2013] xmm0083150801/analysis//spectral/fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src13_pl.csv not found, spectral fit skipped or did not complete