[Sat Jun 22 01:04:40 2013] Detection parameters:
  Position = (289.5, 331.4) = 16 59 49.02 32 37 37.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 76.0 +/- 13.1
  Background counts = 36.8
  Rate = 0.01 +/- 0.002

[Sat Jun 22 01:04:40 2013] Off-axis axis estimate = 2.48'
[Sat Jun 22 01:07:11 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:07:11 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Sat Jun 22 01:07:11 2013] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.123
[Sat Jun 22 01:07:11 2013] Giving source the simple spatial ID 12 for pass 0, mean size = 7.67"
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src12.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src12.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src12_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src12.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src12.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 02:54:12 2013] Source 12 is offset by -2.648596 and 6.498035 pixels which is larger than
2 X fitted extent = 2.104032 x 2.104032, not incorporating fit results
[Sat Jun 22 02:54:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 02:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 02:54:12 2013] Assessing source extent using major
[Sat Jun 22 02:54:12 2013] Source does appear to be extended
[Sat Jun 22 02:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 02:54:30 2013] Using EEF radius (= 7.67 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 02:54:30 2013] Initial guess for spatial extent in simple fitting = 7.67"
[Sat Jun 22 02:54:30 2013] source mask rpix=1.8, npix_max = 20, mask sum = 23, frac = 1.123
[Sat Jun 22 02:54:30 2013] Giving source the simple spatial ID 9 for pass 1, mean size = 7.67"
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src9.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src9.csv
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src9_1.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src9.csv
[Sat Jun 22 03:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src9.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 22 03:25:53 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg exists
[Sat Jun 22 03:25:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src9.csv
[Sat Jun 22 03:25:53 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:40:07 2013] Source 12 is offset by 7.449772 and -4.757160 pixels which is larger than
2 X fitted extent = 7.051448 x 0.881435, not incorporating fit results
[Sat Jun 22 04:40:07 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:40:07 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:40:07 2013] Assessing source extent using major
[Sat Jun 22 04:40:07 2013] Source does appear to be extended
[Sat Jun 22 04:40:07 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 04:40:17 2013] XMMSAS src. selection expression = ellipse(25135.982178, 28787.351044, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 04:40:17 2013] Writing source region out to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12_src.reg
[Sat Jun 22 04:40:17 2013] Extracting stamp from image fullrun_pn_xmm0083150801_pi300-10000_cl_sm2.00.img.gz, (252, 294) - (327, 369)
[Sat Jun 22 04:40:17 2013] XMMSAS bgd. selection expression = annulus(25135.982178, 28787.351044, 1087.500000, 2175.000000, X, Y) && !ellipse(26402.167020, 27857.141200, 1043.400030, 911.000026, 54.942700, X, Y) && !ellipse(25893.167328, 29092.238678, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27421.651764, 28479.444641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27267.020203, 26927.951721, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24826.814636, 27707.006348, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 04:40:17 2013] Writing fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12.gif
[Sat Jun 22 04:47:52 2013] Mean detx,y = (-790.20, -1512.12) 
[Sat Jun 22 04:47:55 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 04:48:25 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 04:48:25 2013] Setting source spectrum file to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12_src_b10.pi.gz
[Sat Jun 22 04:48:25 2013] Setting bgd. spectrum file to fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12_bgd.pi.gz
[Sat Jun 22 05:05:29 2013] Not generating rmf since there are only 76 counts
[Sat Jun 22 05:05:29 2013] rmf not generated due to insufficient counts
[Sat Jun 22 06:04:42 2013] Updating aperture counts using extracted products
[Sat Jun 22 06:04:42 2013] Total counts from fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12_src_b10.pi.gz = 469.00
[Sat Jun 22 06:04:43 2013] Total counts from fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12_bgd.pi.gz = 1036.00
[Sat Jun 22 06:04:43 2013] Got source and background scale factors 1090574.000000, 5006514.000000
[Sat Jun 22 06:04:43 2013] User source parameters:
  Position = (289.5, 331.4) = 16 59 49.02 32 37 37.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 243.3 +/- 22.7
  Background aperture counts = 225.7
  Rate = 0.04 +/- 0.004

[Sat Jun 22 06:04:43 2013] Updating counts from extracted products
[Sat Jun 22 06:04:43 2013] Set source signif. to 243.33/15.02 = 16.20
[Sat Jun 22 06:04:44 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 06:04:44 2013] Using photon index=1.80, rate=0.0435, arf fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12.arf
[Sat Jun 22 06:04:44 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 06:04:44 2013] Updating source flux to 1.6e-13
[Sat Jun 22 06:04:54 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 06:04:57 2013] xmm0083150801/analysis//spectral/fullrun_pn_xmm0083150801_pi300-10000_pass1_cl_src12_pl.csv not found, spectral fit skipped or did not complete