[Sat Jun 22 01:04:40 2013] Detection parameters:
  Position = (311.6, 420.4) = 16 59 41.41 32 44 8.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 45.5 +/- 9.8
  Background counts = 21.3
  Rate = 0.01 +/- 0.002

[Sat Jun 22 01:04:40 2013] Off-axis axis estimate = 8.89'
[Sat Jun 22 01:07:11 2013] Using EEF radius (= 10.87 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:07:11 2013] Initial guess for spatial extent in simple fitting = 10.87"
[Sat Jun 22 01:07:11 2013] source mask rpix=2.5, npix_max = 35, mask sum = 35, frac = 0.972
[Sat Jun 22 01:07:11 2013] Giving source the simple spatial ID 10 for pass 0, mean size = 10.87"
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src10.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src10_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src10.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src10.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 22 01:41:18 2013] fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg exists
[Sat Jun 22 01:41:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src10.csv
[Sat Jun 22 01:41:18 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 02:54:12 2013] Spatial fit model total counts = 216.375000, observed total counts = 195.000000
[Sat Jun 22 02:54:12 2013] Poor agreement between spatial fit and data for source 10
It may help to tweak spatial fit manually
Not incorporating fit results
[Sat Jun 22 02:54:12 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 02:54:12 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 02:54:12 2013] Assessing source extent using major
[Sat Jun 22 02:54:12 2013] Source does appear to be extended
[Sat Jun 22 02:54:12 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 02:54:12 2013] Deleting source due to low Poisson probability 0.9