[Sat Jun 22 01:05:25 2013] Detection parameters:
  Position = (319.5, 317.0) = 16 59 38.68 32 36 34.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 52.3 +/- 11.1
  Background counts = 15.9
  Rate = 0.006 +/- 0.001

[Sat Jun 22 01:05:25 2013] Off-axis axis estimate = 2.04'
[Sat Jun 22 02:05:38 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 02:05:38 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Sat Jun 22 02:05:38 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Sat Jun 22 02:05:38 2013] Giving source the simple spatial ID 9 for pass 0, mean size = 7.45"
[Sat Jun 22 02:54:05 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_src9.ximg exists
[Sat Jun 22 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_src9.csv
[Sat Jun 22 02:54:05 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_src9_1.ximg exists
[Sat Jun 22 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_src9.csv
[Sat Jun 22 02:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 02:54:05 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src9.ximg exists
[Sat Jun 22 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun 22 02:54:05 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg exists
[Sat Jun 22 02:54:05 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src9.csv
[Sat Jun 22 02:54:05 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src9_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src9.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 02:54:20 2013] Source 11 is offset by -5.974125 and -7.345196 pixels which is larger than
2 X fitted extent = 5.283632 x 2.297545, not incorporating fit results
[Sat Jun 22 02:54:20 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 02:54:20 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 02:54:20 2013] Assessing source extent using major
[Sat Jun 22 02:54:20 2013] Source does appear to be extended
[Sat Jun 22 02:54:20 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 03:46:22 2013] Using EEF radius (= 7.45 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 03:46:22 2013] Initial guess for spatial extent in simple fitting = 7.45"
[Sat Jun 22 03:46:22 2013] source mask rpix=1.7, npix_max = 19, mask sum = 20, frac = 1.022
[Sat Jun 22 03:46:22 2013] Giving source the simple spatial ID 7 for pass 1, mean size = 7.45"
[Sat Jun 22 04:40:03 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_src7.ximg exists
[Sat Jun 22 04:40:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_src7.csv
[Sat Jun 22 04:40:03 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_src7_1.ximg exists
[Sat Jun 22 04:40:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_src7.csv
[Sat Jun 22 04:40:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:40:03 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src7.ximg exists
[Sat Jun 22 04:40:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun 22 04:40:03 2013] fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg exists
[Sat Jun 22 04:40:03 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src7.csv
[Sat Jun 22 04:40:03 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src7_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src7.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:40:11 2013] Source 11 is offset by -5.471113 and -7.011058 pixels which is larger than
2 X fitted extent = 2.251949 x 4.289563, not incorporating fit results
[Sat Jun 22 04:40:11 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:40:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:40:11 2013] Assessing source extent using major
[Sat Jun 22 04:40:11 2013] Source does appear to be extended
[Sat Jun 22 04:40:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:49:01 2013] XMMSAS src. selection expression = ellipse(27750.015167, 27532.647919, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 05:49:01 2013] Writing source region out to fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11_src.reg
[Sat Jun 22 05:49:01 2013] Extracting stamp from image fullrun_mos2_xmm0083150801_pi300-10000_cl_sm2.00.img.gz, (282, 280) - (357, 355)
[Sat Jun 22 05:49:01 2013] XMMSAS bgd. selection expression = annulus(27750.015167, 27532.647919, 1087.500000, 2175.000000, X, Y) && !ellipse(26385.373000, 27720.778000, 1118.160032, 563.143216, 18.992700, X, Y) && !ellipse(27269.176086, 28069.725830, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26887.600586, 28737.067444, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26379.542000, 27859.778000, 1066.944031, 912.600026, 196.992000, X, Y) && !ellipse(26578.157000, 26289.344000, 1073.160031, 1073.160031, 0.000000, X, Y) && !ellipse(25369.993805, 27182.566376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25812.733215, 26942.979187, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:49:01 2013] Writing fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11.gif
[Sat Jun 22 05:51:37 2013] Mean detx,y = (-1050.77, -692.11) 
[Sat Jun 22 05:51:39 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 05:51:53 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 05:51:53 2013] Setting source spectrum file to fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11_src_b10.pi.gz
[Sat Jun 22 05:51:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11_bgd.pi.gz
[Sat Jun 22 06:03:47 2013] Not generating rmf since there are only 52 counts
[Sat Jun 22 06:03:47 2013] rmf not generated due to insufficient counts
[Sat Jun 22 06:04:47 2013] Updating aperture counts using extracted products
[Sat Jun 22 06:04:47 2013] Total counts from fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11_src_b10.pi.gz = 237.00
[Sat Jun 22 06:04:47 2013] Total counts from fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11_bgd.pi.gz = 428.00
[Sat Jun 22 06:04:47 2013] Got source and background scale factors 1218496.000000, 5815704.000000
[Sat Jun 22 06:04:47 2013] User source parameters:
  Position = (319.5, 317.0) = 16 59 38.68 32 36 34.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 147.3 +/- 16.4
  Background aperture counts = 89.7
  Rate = 0.02 +/- 0.002

[Sat Jun 22 06:04:47 2013] Updating counts from extracted products
[Sat Jun 22 06:04:47 2013] Set source signif. to 147.33/9.47 = 15.56
[Sat Jun 22 06:04:48 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 06:04:48 2013] Using photon index=1.80, rate=0.0221, arf fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11.arf
[Sat Jun 22 06:04:48 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 06:04:48 2013] Updating source flux to 2.2e-13
[Sat Jun 22 06:04:51 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 06:04:54 2013] xmm0083150801/analysis//spectral/fullrun_mos2_xmm0083150801_pi300-10000_pass1_cl_src11_pl.csv not found, spectral fit skipped or did not complete