[Sat Jun 22 01:05:01 2013] Detection parameters:
  Position = (316.8, 318.1) = 16 59 39.60 32 36 40.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 68.1 +/- 12.7
  Background counts = 17.3
  Rate = 0.008 +/- 0.002

[Sat Jun 22 01:05:01 2013] Off-axis axis estimate = 1.95'
[Sat Jun 22 01:41:18 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 01:41:18 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Sat Jun 22 01:41:18 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sat Jun 22 01:41:18 2013] Giving source the simple spatial ID 4 for pass 0, mean size = 7.40"
[Sat Jun 22 02:05:38 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass0_src4.ximg exists
[Sat Jun 22 02:05:38 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass0_src4_1.ximg exists
[Sat Jun 22 02:05:38 2013] Fit fullrun_mos1_xmm0083150801_pi300-10000_cl_pass0_src4 appears to have run properly
[Sat Jun 22 02:05:38 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Sat Jun 22 02:05:38 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Sat Jun 22 02:05:38 2013] Fit fullrun_mos1_xmm0083150801_pi300-10000_cl_pass0_tfrozen_src4 appears to have run properly
[Sat Jun 22 02:54:16 2013] Source 8 is offset by 7.654720 and -3.079290 pixels which is larger than
2 X fitted extent = 2.146984 x 4.230106, not incorporating fit results
[Sat Jun 22 02:54:16 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 02:54:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 02:54:16 2013] Assessing source extent using major
[Sat Jun 22 02:54:16 2013] Source does appear to be extended
[Sat Jun 22 02:54:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 03:25:53 2013] Using EEF radius (= 7.40 ")to estimate initial spatial extent for simple fitting
[Sat Jun 22 03:25:53 2013] Initial guess for spatial extent in simple fitting = 7.40"
[Sat Jun 22 03:25:53 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.825
[Sat Jun 22 03:25:53 2013] Giving source the simple spatial ID 4 for pass 1, mean size = 7.40"
[Sat Jun 22 03:46:22 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_src4.ximg exists
[Sat Jun 22 03:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 03:46:22 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_src4_1.ximg exists
[Sat Jun 22 03:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_src4.csv
[Sat Jun 22 03:46:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 03:46:22 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.ximg exists
[Sat Jun 22 03:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 03:46:22 2013] fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg exists
[Sat Jun 22 03:46:22 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.csv
[Sat Jun 22 03:46:22 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083150801_pi300-10000_cl_pass1_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sat Jun 22 04:40:09 2013] Source 8 is offset by -5.962154 and -7.739345 pixels which is larger than
2 X fitted extent = 0.926795 x 0.926795, not incorporating fit results
[Sat Jun 22 04:40:09 2013] Vigneting correction estimate = 1.000000
[Sat Jun 22 04:40:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sat Jun 22 04:40:09 2013] Assessing source extent using major
[Sat Jun 22 04:40:09 2013] Source does appear to be extended
[Sat Jun 22 04:40:09 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jun 22 05:06:35 2013] XMMSAS src. selection expression = ellipse(27517.126617, 27623.510986, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jun 22 05:06:35 2013] Writing source region out to fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8_src.reg
[Sat Jun 22 05:06:35 2013] Extracting stamp from image fullrun_mos1_xmm0083150801_pi300-10000_cl_sm2.00.img.gz, (279, 281) - (354, 356)
[Sat Jun 22 05:06:35 2013] XMMSAS bgd. selection expression = annulus(27517.126617, 27623.510986, 1087.500000, 2175.000000, X, Y) && !ellipse(26389.724820, 27876.667000, 1375.936040, 1375.936040, 0.000000, X, Y) && !ellipse(26701.485687, 28909.405396, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jun 22 05:06:35 2013] Writing fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8.gif
[Sat Jun 22 05:13:54 2013] Mean detx,y = (-276.11, 648.81) 
[Sat Jun 22 05:13:56 2013] Setting backscal keywords in source and bgd. spectrum
[Sat Jun 22 05:14:08 2013] Binned source spectrum to 10 counts/bin
[Sat Jun 22 05:14:09 2013] Setting source spectrum file to fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8_src_b10.pi.gz
[Sat Jun 22 05:14:09 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8_bgd.pi.gz
[Sat Jun 22 05:48:55 2013] Not generating rmf since there are only 68 counts
[Sat Jun 22 05:48:55 2013] rmf not generated due to insufficient counts
[Sat Jun 22 06:04:45 2013] Updating aperture counts using extracted products
[Sat Jun 22 06:04:45 2013] Total counts from fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8_src_b10.pi.gz = 315.00
[Sat Jun 22 06:04:45 2013] Total counts from fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8_bgd.pi.gz = 626.00
[Sat Jun 22 06:04:45 2013] Got source and background scale factors 1330380.000000, 7151520.000000
[Sat Jun 22 06:04:45 2013] User source parameters:
  Position = (316.8, 318.1) = 16 59 39.60 32 36 40.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 198.5 +/- 18.8
  Background aperture counts = 116.5
  Rate = 0.03 +/- 0.003

[Sat Jun 22 06:04:45 2013] Updating counts from extracted products
[Sat Jun 22 06:04:45 2013] Set source signif. to 198.55/10.79 = 18.40
[Sat Jun 22 06:04:45 2013] Calculating source flux in energy range 0.30-8.00
[Sat Jun 22 06:04:45 2013] Using photon index=1.80, rate=0.0296, arf fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8.arf
[Sat Jun 22 06:04:45 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jun 22 06:04:45 2013] Updating source flux to 3e-13
[Sat Jun 22 06:04:49 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sat Jun 22 06:04:51 2013] xmm0083150801/analysis//spectral/fullrun_mos1_xmm0083150801_pi300-10000_pass1_cl_src8_pl.csv not found, spectral fit skipped or did not complete