[Sun Jun 24 15:41:56 2012] Detection parameters:
  Position = (304.9, 321.8) = 16 59 43.85 32 36 56.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 95.9 +/- 12.3
  Background counts = 5.6
  Rate = 0.04 +/- 0.005

[Sun Jun 24 15:41:56 2012] Off-axis axis estimate = 1.75'
[Sun Jun 24 15:52:49 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Sun Jun 24 15:52:49 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Sun Jun 24 15:52:49 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.842
[Sun Jun 24 15:52:49 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 7.31"
[Sun Jun 24 16:00:14 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_src1.ximg exists
[Sun Jun 24 16:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 16:00:14 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_src1_1.ximg exists
[Sun Jun 24 16:00:14 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_src1.csv
[Sun Jun 24 16:00:14 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 16:00:14 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Sun Jun 24 16:00:14 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Sun Jun 24 16:00:14 2012] Fit fullrun_mos2_xmm0083150601_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Sun Jun 24 16:00:17 2012] Spatial fit model total counts = 97.973300, observed total counts = 90.000000
[Sun Jun 24 16:00:17 2012] Offset between fit and detection position for source 1 = 0.910036 pixels
[Sun Jun 24 16:00:17 2012] 97.841500 total counts/ 70.322300 bgd. counts: snr = 3.281627
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.910036 pixels
  Position = (304.0, 321.7) = 16 59 44.17 32 36 57.7
  Extent = 11.2 (4.5-14.6)", rotation angle = 0
  Source counts = 27.5 +/- 9.9
  Background counts = 70.3
  Rate = 0.07 +/- 0.02
[Sun Jun 24 16:00:17 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 16:00:17 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 16:00:17 2012] Assessing source extent using major axis lower bound
[Sun Jun 24 16:00:17 2012] Source does appear to be extended
[Sun Jun 24 16:00:17 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sun Jun 24 16:10:57 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Sun Jun 24 16:10:57 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Sun Jun 24 16:10:57 2012] Initial guess for spatial extent in simple fitting = 11.22"
[Sun Jun 24 16:10:57 2012] source mask rpix=2.6, npix_max = 37, mask sum = 36, frac = 0.948
[Sun Jun 24 16:10:57 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 11.22"
[Sun Jun 24 16:18:46 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_src1.ximg exists
[Sun Jun 24 16:18:46 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_src1_1.ximg exists
[Sun Jun 24 16:18:46 2012] Fit fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_src1 appears to have run properly
[Sun Jun 24 16:18:46 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Sun Jun 24 16:18:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 24 16:18:46 2012] fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Sun Jun 24 16:18:46 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_tfrozen_src1.csv
[Sun Jun 24 16:18:46 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_tfrozen_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150601_pi300-10000_cl_pass1_tfrozen_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun Jun 24 16:18:49 2012] Spatial fit model total counts = 128.028000, observed total counts = 117.000000
[Sun Jun 24 16:18:49 2012] Offset between fit and detection position for source 1 = 1.512180 pixels
[Sun Jun 24 16:18:49 2012] 127.141400 total counts/ 51.699500 bgd. counts: snr = 10.492270
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 1.512180 pixels
  Position = (305.5, 322.1) = 16 59 43.66 32 36 59.2
  Extent = 22.6" x 14.8", rotation angle = 1
  Source counts = 75.4 +/- 11.3
  Background counts = 51.7
  Rate = 0.2 +/- 0.03
[Sun Jun 24 16:18:49 2012] Vigneting correction estimate = 1.000000
[Sun Jun 24 16:18:49 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun Jun 24 16:18:49 2012] Assessing source extent using major
[Sun Jun 24 16:18:49 2012] Source does appear to be extended
[Sun Jun 24 16:18:49 2012] Computing asymmetry using major and minor axis, asym = 1.53
[Sun Jun 24 16:18:49 2012] Source is asymmetric
[Sun Jun 24 16:18:49 2012] Source is confused with source 3
[Sun Jun 24 16:21:12 2012] XMMSAS src. selection expression = ellipse(26526.941400, 27970.450200, 1358.100039, 887.634026, 0.539731, X, Y)
[Sun Jun 24 16:21:12 2012] Writing source region out to fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1_src.reg
[Sun Jun 24 16:21:12 2012] Extracting stamp from image fullrun_mos2_xmm0083150601_pi300-10000_cl_sm2.00.img.gz, (227, 244) - (384, 400)
[Sun Jun 24 16:21:12 2012] XMMSAS bgd. selection expression = annulus(26526.941400, 27970.450200, 2263.500065, 4527.000130, X, Y) && !ellipse(25726.468658, 27729.765259, 870.000000, 870.000000, 0.000000, X, Y)
[Sun Jun 24 16:21:12 2012] Writing fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1.gif
[Sun Jun 24 16:21:13 2012] Mean detx,y = (92.08, 130.29) 
[Sun Jun 24 16:21:14 2012] Setting backscal keywords in source and bgd. spectrum
[Sun Jun 24 16:21:29 2012] Binned source spectrum to 10 counts/bin
[Sun Jun 24 16:21:29 2012] Setting source spectrum file to fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 16:21:29 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Sun Jun 24 16:22:04 2012] Not generating rmf since there are only 75 counts
[Sun Jun 24 16:22:04 2012] rmf not generated due to insufficient counts
[Sun Jun 24 16:22:44 2012] Updating aperture counts using extracted products
[Sun Jun 24 16:22:44 2012] Error reading totcts from fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1_src_b10.pi.gz
[Sun Jun 24 16:22:44 2012] Calculating source flux in energy range 0.30-8.00
[Sun Jun 24 16:22:44 2012] Using photon index=1.80, rate=0.185, arf fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1.arf
[Sun Jun 24 16:22:44 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sun Jun 24 16:22:44 2012] Updating source flux to 1.9e-12
[Sun Jun 24 16:22:45 2012] Flag c found in src. 1 procflags, skipping spectral fitting
[Sun Jun 24 16:22:45 2012] Source 1 has fewer than 100.000000 counts, skipping spectral fitting
[Sun Jun 24 16:22:46 2012] xmm0083150601/analysis//spectral/fullrun_mos2_xmm0083150601_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete