[Fri Jul 13 17:53:11 2012] Detection parameters:
  Position = (298.0, 327.3) = 11 33 7.97 66 23 20.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.8 +/- 22.5
  Background counts = 73.7
  Rate = 0.01 +/- 0.001

[Fri Jul 13 17:53:11 2012] Off-axis axis estimate = 2.09'
[Fri Jul 13 19:16:10 2012] Using EEF radius (= 7.48 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 19:16:10 2012] Initial guess for spatial extent in simple fitting = 7.48"
[Fri Jul 13 19:16:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.813
[Fri Jul 13 19:16:10 2012] Giving source the simple spatial ID 4 for pass 0, mean size = 7.48"
[Fri Jul 13 20:32:44 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src4.ximg exists
[Fri Jul 13 20:32:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src4.csv
[Fri Jul 13 20:32:44 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src4_1.ximg exists
[Fri Jul 13 20:32:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src4.csv
[Fri Jul 13 20:32:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:32:45 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src4.ximg exists
[Fri Jul 13 20:32:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 13 20:32:45 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg exists
[Fri Jul 13 20:32:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src4.csv
[Fri Jul 13 20:32:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src4_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src4.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:32:59 2012] Spatial fit model total counts = 2043.270000, observed total counts = 1776.000000
[Fri Jul 13 20:32:59 2012] Poor agreement between spatial fit and data for source 2
It may help to tweak spatial fit manually
Not incorporating fit results
[Fri Jul 13 20:33:00 2012] Spatial fit model total counts = 1212.650000, observed total counts = 1198.000000
[Fri Jul 13 20:33:00 2012] Offset between fit and detection position for source 2 = 1.367708 pixels
[Fri Jul 13 20:33:00 2012] Warning, changing simple spatial fit ID from 4 to 17
[Fri Jul 13 20:33:00 2012] 1160.400900 total counts/ 1099.590000 bgd. counts: snr = 1.833859
Spatial fit parameters:
  Offset between fit and detection position for source 2 = 1.367708 pixels
  Position = (298.1, 326.0) = 11 33 7.91 66 23 19.2
  Extent = 6.6 (4.0-13.5)", rotation angle = 0
  Source counts = 60.8 +/- 34.1
  Background counts = 1099.6
  Rate = 0.003 +/- 0.002
[Fri Jul 13 20:33:00 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:33:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:33:00 2012] Assessing source extent using major axis lower bound
[Fri Jul 13 20:33:00 2012] Source does appear to be extended
[Fri Jul 13 20:33:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:33:00 2012] Deleting source due to low Poisson probability 0.9