[Fri Jul 13 17:53:11 2012] Detection parameters:
  Position = (308.9, 320.3) = 11 33 0.13 66 22 49.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 113.9 +/- 17.0
  Background counts = 70.3
  Rate = 0.006 +/- 0.0009

[Fri Jul 13 17:53:11 2012] Off-axis axis estimate = 1.76'
[Fri Jul 13 19:16:10 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 19:16:10 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Jul 13 19:16:10 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.894
[Fri Jul 13 19:16:10 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 7.31"
[Fri Jul 13 20:32:44 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src12.ximg exists
[Fri Jul 13 20:32:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src12.csv
[Fri Jul 13 20:32:44 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src12_1.ximg exists
[Fri Jul 13 20:32:44 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src12.csv
[Fri Jul 13 20:32:44 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:32:45 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Fri Jul 13 20:32:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jul 13 20:32:45 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Fri Jul 13 20:32:45 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src12.csv
[Fri Jul 13 20:32:45 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150401_pi300-10000_cl_pass0_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 20:33:00 2012] Warning, spatial fit 12 centroid is now closest to src. 11
[Fri Jul 13 20:33:00 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 20:33:00 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 20:33:00 2012] Assessing source extent using major
[Fri Jul 13 20:33:00 2012] Source does appear to be extended
[Fri Jul 13 20:33:00 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Fri Jul 13 20:33:00 2012] Source is confused with source 12
[Fri Jul 13 22:12:38 2012] Using EEF radius (= 7.31 ")to estimate initial spatial extent for simple fitting
[Fri Jul 13 22:12:38 2012] Initial guess for spatial extent in simple fitting = 7.31"
[Fri Jul 13 22:12:38 2012] source mask rpix=1.7, npix_max = 19, mask sum = 17, frac = 0.894
[Fri Jul 13 22:12:38 2012] Giving source the simple spatial ID 10 for pass 1, mean size = 7.31"
[Fri Jul 13 23:15:32 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_src10.ximg exists
[Fri Jul 13 23:15:32 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_src10_1.ximg exists
[Fri Jul 13 23:15:32 2012] Fit fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_src10 appears to have run properly
[Fri Jul 13 23:15:32 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_tfrozen_src10.ximg exists
[Fri Jul 13 23:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jul 13 23:15:32 2012] fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg exists
[Fri Jul 13 23:15:32 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_tfrozen_src10.csv
[Fri Jul 13 23:15:32 2012] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_tfrozen_src10_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0083150401_pi300-10000_cl_pass1_tfrozen_src10.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Fri Jul 13 23:15:45 2012] Warning, spatial fit 10 centroid is now closest to src. 11
[Fri Jul 13 23:15:45 2012] Vigneting correction estimate = 1.000000
[Fri Jul 13 23:15:45 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Fri Jul 13 23:15:45 2012] Assessing source extent using major
[Fri Jul 13 23:15:45 2012] Source does appear to be extended
[Fri Jul 13 23:15:45 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Sat Jul 14 02:44:16 2012] XMMSAS src. selection expression = ellipse(26823.303741, 27821.400940, 652.500000, 652.500000, 0.000000, X, Y)
[Sat Jul 14 02:44:16 2012] Writing source region out to fullrun_mos2_xmm0083150401_pi300-10000_pass1_cl_src14_src.reg
[Sat Jul 14 02:44:16 2012] Extracting stamp from image fullrun_mos2_xmm0083150401_pi300-10000_cl_sm2.00.img.gz, (271, 283) - (346, 358)
[Sat Jul 14 02:44:16 2012] XMMSAS bgd. selection expression = annulus(26823.303741, 27821.400940, 1087.500000, 2175.000000, X, Y) && !ellipse(25020.634000, 27697.432000, 1362.576039, 1362.576039, 0.000000, X, Y) && !ellipse(24282.274000, 27063.594000, 1154.184033, 1154.184033, 0.000000, X, Y) && !ellipse(24092.138824, 27788.409546, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26054.440000, 28058.050000, 1188.656034, 1188.656034, 0.000000, X, Y) && !ellipse(25524.123566, 28746.314911, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25265.098000, 26837.902000, 1050.808030, 1050.808030, 0.000000, X, Y) && !ellipse(23913.092000, 26530.850000, 1144.816033, 1144.816033, 0.000000, X, Y) && !ellipse(26747.298218, 27114.953400, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26154.520000, 25895.362000, 1050.808030, 1050.808030, 0.000000, X, Y) && !ellipse(26357.486816, 28821.056641, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26667.910187, 28563.930328, 870.000000, 870.000000, 0.000000, X, Y)
[Sat Jul 14 02:44:16 2012] Writing fullrun_mos2_xmm0083150401_pi300-10000_pass1_cl_src14.gif
[Sat Jul 14 02:46:33 2012] Mean detx,y = (-901.68, -1279.49) 
[Sat Jul 14 02:46:34 2012] Setting backscal keywords in source and bgd. spectrum
[Sat Jul 14 02:46:43 2012] Binned source spectrum to 10 counts/bin
[Sat Jul 14 02:46:43 2012] Setting source spectrum file to fullrun_mos2_xmm0083150401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jul 14 02:46:43 2012] Setting bgd. spectrum file to fullrun_mos2_xmm0083150401_pi300-10000_pass1_cl_src14_bgd.pi.gz
[Sat Jul 14 03:04:27 2012] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sat Jul 14 03:04:27 2012] rmf not generated due to insufficient counts
[Sat Jul 14 03:05:51 2012] Updating aperture counts using extracted products
[Sat Jul 14 03:05:51 2012] Error reading totcts from fullrun_mos2_xmm0083150401_pi300-10000_pass1_cl_src14_src_b10.pi.gz
[Sat Jul 14 03:05:51 2012] Calculating source flux in energy range 0.30-8.00
[Sat Jul 14 03:05:51 2012] Using photon index=1.80, rate=0.0057, arf fullrun_mos2_xmm0083150401_pi300-10000_pass1_cl_src14.arf
[Sat Jul 14 03:05:51 2012] Assuming count rate is from the 0.30-10.00 bandpass
[Sat Jul 14 03:05:51 2012] Updating source flux to 6.4e-14
[Sat Jul 14 03:06:25 2012] Simple spatial fitting not done (or not done successfully), skipping spectral fitting