[Sun May  5 00:51:52 2013] Detection parameters:
  Position = (218.6, 171.4) = 23 37 1.38 20 58 29.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 59.9 +/- 10.8
  Background counts = 23.2
  Rate = 0.005 +/- 0.0008

[Sun May  5 00:51:52 2013] Off-axis axis estimate = 10.88'
[Sun May  5 00:53:57 2013] Using EEF radius (= 11.87 ")to estimate initial spatial extent for simple fitting
[Sun May  5 00:53:57 2013] Initial guess for spatial extent in simple fitting = 11.87"
[Sun May  5 00:53:57 2013] source mask rpix=2.7, npix_max = 41, mask sum = 38, frac = 0.912
[Sun May  5 00:53:57 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 11.87"
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src33.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src33.csv
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src33_1.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src33.csv
[Sun May  5 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src33.csv
[Sun May  5 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 04:50:55 2013] Spatial fit model total counts = 213.821000, observed total counts = 121.000000
[Sun May  5 04:50:55 2013] Poor agreement between spatial fit and data for source 34
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 04:50:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 04:50:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 04:50:55 2013] Assessing source extent using major
[Sun May  5 04:50:55 2013] Source does appear to be extended
[Sun May  5 04:50:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 04:50:55 2013] Deleting source due to low Poisson probability 0.9