[Sun May  5 00:51:52 2013] Detection parameters:
  Position = (337.3, 283.1) = 23 36 24.49 21 6 37.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 96.0 +/- 19.1
  Background counts = 105.1
  Rate = 0.009 +/- 0.002

[Sun May  5 00:51:52 2013] Off-axis axis estimate = 3.03'
[Sun May  5 00:53:57 2013] Using EEF radius (= 7.94 ")to estimate initial spatial extent for simple fitting
[Sun May  5 00:53:57 2013] Initial guess for spatial extent in simple fitting = 7.94"
[Sun May  5 00:53:57 2013] source mask rpix=1.8, npix_max = 21, mask sum = 20, frac = 0.924
[Sun May  5 00:53:57 2013] Giving source the simple spatial ID 28 for pass 0, mean size = 7.94"
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src28.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src28.csv
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src28_1.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src28.csv
[Sun May  5 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src28.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src28.csv
[Sun May  5 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 04:50:55 2013] Spatial fit model total counts = 2424.080000, observed total counts = 2427.000000
[Sun May  5 04:50:55 2013] Offset between fit and detection position for source 29 = 0.546111 pixels
[Sun May  5 04:50:55 2013] Warning, changing simple spatial fit ID from 28 to 8
[Sun May  5 04:50:55 2013] 2440.999900 total counts/ 2429.810000 bgd. counts: snr = 0.227007
Spatial fit parameters:
  Offset between fit and detection position for source 29 = 0.546111 pixels
  Position = (336.8, 283.3) = 23 36 24.65 21 6 38.0
  Extent = 1.9 (1.9-5.4)", rotation angle = 0
  Source counts = 11.2 +/- 49.4
  Background counts = 2429.8
  Rate = 0.001 +/- 0.005
  Deleting source due to low Poisson probability