[Sun May  5 00:51:52 2013] Detection parameters:
  Position = (396.5, 225.4) = 23 36 6.10 21 2 26.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 70.3 +/- 12.8
  Background counts = 28.9
  Rate = 0.01 +/- 0.002

[Sun May  5 00:51:52 2013] Off-axis axis estimate = 8.86'
[Sun May  5 00:53:57 2013] Using EEF radius (= 10.86 ")to estimate initial spatial extent for simple fitting
[Sun May  5 00:53:57 2013] Initial guess for spatial extent in simple fitting = 10.86"
[Sun May  5 00:53:57 2013] source mask rpix=2.5, npix_max = 35, mask sum = 36, frac = 1.002
[Sun May  5 00:53:57 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 10.86"
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src27.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src27.csv
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src27_1.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src27.csv
[Sun May  5 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May  5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Sun May  5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src27.csv
[Sun May  5 01:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 04:50:55 2013] Spatial fit model total counts = 251.788000, observed total counts = 206.000000
[Sun May  5 04:50:55 2013] Poor agreement between spatial fit and data for source 28
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 04:50:55 2013] Vigneting correction estimate = 1.000000
[Sun May  5 04:50:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 04:50:55 2013] Assessing source extent using major
[Sun May  5 04:50:55 2013] Source does appear to be extended
[Sun May  5 04:50:55 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 04:50:55 2013] Deleting source due to low Poisson probability 1.0