[Sun May 5 00:51:52 2013] Detection parameters: Position = (303.5, 333.3) = 23 36 35.01 21 10 17.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 146.8 +/- 20.9 Background counts = 97.6 Rate = 0.02 +/- 0.002 [Sun May 5 00:51:52 2013] Off-axis axis estimate = 2.55' [Sun May 5 00:53:57 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Sun May 5 00:53:57 2013] Initial guess for spatial extent in simple fitting = 7.71" [Sun May 5 00:53:57 2013] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.163 [Sun May 5 00:53:57 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 7.71" [Sun May 5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src17.ximg exists [Sun May 5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src17.csv [Sun May 5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src17_1.ximg exists [Sun May 5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src17.csv [Sun May 5 01:59:54 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src17.ximg exists [Sun May 5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src17.csv [Sun May 5 01:59:54 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists [Sun May 5 01:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src17.csv [Sun May 5 01:59:54 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src17_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 04:50:55 2013] Source 18 is offset by 2.723584 and 6.108870 pixels which is larger than 2 X fitted extent = 0.885651 x 7.085196, not incorporating fit results [Sun May 5 04:50:55 2013] Vigneting correction estimate = 1.000000 [Sun May 5 04:50:55 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 04:50:55 2013] Assessing source extent using major [Sun May 5 04:50:55 2013] Source does appear to be extended [Sun May 5 04:50:55 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 04:51:17 2013] Using EEF radius (= 7.71 ")to estimate initial spatial extent for simple fitting [Sun May 5 04:51:17 2013] Initial guess for spatial extent in simple fitting = 7.71" [Sun May 5 04:51:17 2013] source mask rpix=1.8, npix_max = 20, mask sum = 24, frac = 1.163 [Sun May 5 04:51:17 2013] Giving source the simple spatial ID 14 for pass 1, mean size = 7.71" [Sun May 5 05:34:18 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_src14.ximg exists [Sun May 5 05:34:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_src14.csv [Sun May 5 05:34:18 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_src14_1.ximg exists [Sun May 5 05:34:18 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_src14.csv [Sun May 5 05:34:18 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 05:34:19 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src14.ximg exists [Sun May 5 05:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src14.csv [Sun May 5 05:34:19 2013] fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg exists [Sun May 5 05:34:19 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src14.csv [Sun May 5 05:34:19 2013] It looks like the fit did not converge You should probably delete fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src14_1.ximg Either tweak this fit manually starting from fullrun_pn_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src14.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:32:02 2013] Source 18 is offset by 1.859430 and -1.688441 pixels which is larger than 2 X fitted extent = 1.053825 x 1.053825, not incorporating fit results [Sun May 5 07:32:02 2013] Source 18 is offset by 6.191292 and -1.458379 pixels which is larger than 2 X fitted extent = 0.885651 x 0.885651, not incorporating fit results [Sun May 5 07:32:02 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:32:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:32:02 2013] Assessing source extent using major [Sun May 5 07:32:02 2013] Source does appear to be extended [Sun May 5 07:32:02 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 07:32:14 2013] XMMSAS src. selection expression = ellipse(26355.442444, 28947.523651, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 07:32:14 2013] Writing source region out to fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18_src.reg [Sun May 5 07:32:14 2013] Extracting stamp from image fullrun_pn_xmm0083150201_pi300-10000_cl_sm2.00.img.gz, (266, 296) - (341, 371) [Sun May 5 07:32:14 2013] XMMSAS bgd. selection expression = annulus(26355.442444, 28947.523651, 1087.500000, 2175.000000, X, Y) && !ellipse(27687.651680, 27130.268000, 1171.784034, 1171.784034, 0.000000, X, Y) && !ellipse(27433.939240, 28543.359161, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27897.063965, 28371.363708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28710.392365, 28099.241791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28916.722656, 26398.769867, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25683.751892, 26835.312439, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 07:32:14 2013] Writing fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18.gif [Sun May 5 07:40:11 2013] Mean detx,y = (-1489.28, -1609.17) [Sun May 5 07:40:14 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 07:40:42 2013] Binned source spectrum to 10 counts/bin [Sun May 5 07:40:43 2013] Setting source spectrum file to fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18_src_b10.pi.gz [Sun May 5 07:40:43 2013] Setting bgd. spectrum file to fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18_bgd.pi.gz [Sun May 5 09:40:56 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 09:40:56 2013] rmf not generated due to insufficient counts [Sun May 5 10:57:02 2013] Updating aperture counts using extracted products [Sun May 5 10:57:02 2013] Total counts from fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18_src_b10.pi.gz = 884.00 [Sun May 5 10:57:02 2013] Total counts from fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18_bgd.pi.gz = 3045.00 [Sun May 5 10:57:02 2013] Got source and background scale factors 983492.000000, 5585439.000000 [Sun May 5 10:57:02 2013] User source parameters: Position = (303.5, 333.3) = 23 36 35.01 21 10 17.5 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 347.8 +/- 30.7 Background aperture counts = 536.2 Rate = 0.03 +/- 0.003 [Sun May 5 10:57:02 2013] Updating counts from extracted products [Sun May 5 10:57:02 2013] Set source signif. to 347.83/23.16 = 15.02 [Sun May 5 10:57:02 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 10:57:02 2013] Using photon index=1.80, rate=0.033, arf fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18.arf [Sun May 5 10:57:02 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 10:57:02 2013] Updating source flux to 1.1e-13 [Sun May 5 10:57:15 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 10:57:16 2013] xmm0083150201/analysis//spectral/fullrun_pn_xmm0083150201_pi300-10000_pass1_cl_src18_pl.csv not found, spectral fit skipped or did not complete