[Sun May 5 00:52:36 2013] Detection parameters: Position = (329.9, 311.0) = 23 36 26.79 21 8 39.5 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 304.5 +/- 25.1 Background counts = 54.9 Rate = 0.02 +/- 0.002 [Sun May 5 00:52:37 2013] Off-axis axis estimate = 2.46' [Sun May 5 03:11:36 2013] Using EEF radius (= 7.66 ")to estimate initial spatial extent for simple fitting [Sun May 5 03:11:36 2013] Initial guess for spatial extent in simple fitting = 7.66" [Sun May 5 03:11:36 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.783 [Sun May 5 03:11:36 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 7.66" [Sun May 5 04:50:46 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src2.ximg exists [Sun May 5 04:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src2.csv [Sun May 5 04:50:46 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src2_1.ximg exists [Sun May 5 04:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src2.csv [Sun May 5 04:50:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 04:50:46 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists [Sun May 5 04:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sun May 5 04:50:46 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists [Sun May 5 04:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2.csv [Sun May 5 04:50:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 04:51:09 2013] Source 4 is offset by 6.947972 and -3.699427 pixels which is larger than 2 X fitted extent = 3.204975 x 3.204975, not incorporating fit results [Sun May 5 04:51:09 2013] Source 4 is offset by 7.847995 and 1.094113 pixels which is larger than 2 X fitted extent = 3.662846 x 3.662846, not incorporating fit results [Sun May 5 04:51:09 2013] Spatial fit model total counts = 964.407000, observed total counts = 962.000000 [Sun May 5 04:51:09 2013] Offset between fit and detection position for source 4 = 7.138733 pixels [Sun May 5 04:51:09 2013] Warning, changing simple spatial fit ID from 2 to 27 [Sun May 5 04:51:09 2013] 895.253000 total counts/ 777.141000 bgd. counts: snr = 4.236860 Spatial fit parameters: Offset between fit and detection position for source 4 = 7.138733 pixels Position = (336.4, 313.9) = 23 36 24.76 21 8 51.2 Extent = 16.4 (16.4-16.4)" x 7.7 (3.9-15.2)", rotation angle = 359 Source counts = 118.1 +/- 29.9 Background counts = 777.1 Rate = 0.008 +/- 0.002 [Sun May 5 04:51:09 2013] Vigneting correction estimate = 1.000000 [Sun May 5 04:51:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 04:51:09 2013] Assessing source extent using major axis lower bound [Sun May 5 04:51:09 2013] Source does appear to be extended [Sun May 5 04:51:09 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.08 [Sun May 5 04:51:09 2013] Source is confused with source 18 [Sun May 5 04:51:09 2013] Source is confused with source 23 [Sun May 5 04:51:09 2013] Source is confused with source 17 [Sun May 5 06:13:54 2013] Using previous fit value to estimate initial spatial extent for simple fitting [Sun May 5 06:13:54 2013] Initial guess for spatial extent in simple fitting = 12.04" [Sun May 5 06:13:54 2013] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.983 [Sun May 5 06:13:54 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 12.04" [Sun May 5 07:31:57 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src2.ximg exists [Sun May 5 07:31:57 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src2_1.ximg exists [Sun May 5 07:31:57 2013] Fit fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src2 appears to have run properly [Sun May 5 07:31:58 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists [Sun May 5 07:31:58 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists [Sun May 5 07:31:58 2013] Fit fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly [Sun May 5 07:32:08 2013] Warning, spatial fit 2 centroid is now closest to src. 17 [Sun May 5 07:32:08 2013] Spatial fit model total counts = 1569.600000, observed total counts = 1534.000000 [Sun May 5 07:32:08 2013] Offset between fit and detection position for source 4 = 7.193354 pixels [Sun May 5 07:32:08 2013] Warning, changing simple spatial fit ID from 2 to 5 [Sun May 5 07:32:08 2013] 1300.684000 total counts/ 1026.970000 bgd. counts: snr = 8.541185 Spatial fit parameters: Offset between fit and detection position for source 4 = 7.193354 pixels Position = (329.5, 312.1) = 23 36 26.93 21 8 43.3 Extent = 17.3 (17.3-17.3)", rotation angle = 0 Source counts = 273.7 +/- 36.1 Background counts = 1027.0 Rate = 0.02 +/- 0.002 [Sun May 5 07:32:08 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:32:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:32:08 2013] Assessing source extent using major axis lower bound [Sun May 5 07:32:08 2013] Source does appear to be extended [Sun May 5 07:32:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 10:19:37 2013] XMMSAS src. selection expression = ellipse(28616.146000, 27104.514000, 1038.276030, 1038.276030, 0.000000, X, Y) [Sun May 5 10:19:37 2013] Writing source region out to fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4_src.reg [Sun May 5 10:19:37 2013] Extracting stamp from image fullrun_mos2_xmm0083150201_pi300-10000_cl_sm2.00.img.gz, (270, 252) - (389, 372) [Sun May 5 10:19:37 2013] XMMSAS bgd. selection expression = annulus(28616.146000, 27104.514000, 1730.460050, 3460.920100, X, Y) && !ellipse(27675.054600, 27186.838000, 1172.336034, 1172.336034, 0.000000, X, Y) && !ellipse(28132.607544, 25959.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.970000, 27394.135400, 1315.056038, 704.312820, 48.996000, X, Y) && !ellipse(28585.345795, 26229.012604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.362488, 27957.614563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.990540, 26574.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.178375, 26843.070435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27766.164200, 24652.211600, 1183.808034, 1183.808034, 0.000000, X, Y) && !ellipse(27029.562347, 24942.297791, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28961.943115, 25098.732117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.659393, 25702.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26217.662354, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29016.121400, 24562.080000, 1235.488036, 1235.488036, 0.000000, X, Y) && !ellipse(26229.647156, 25529.003510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27032.419159, 25445.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.914000, 26367.856000, 1241.656036, 524.174415, 212.352000, X, Y) && !ellipse(28996.256714, 28507.152527, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25536.827881, 26746.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29928.225098, 27453.294403, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 10:19:37 2013] Writing fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4.gif [Sun May 5 10:22:47 2013] Mean detx,y = (-725.34, 286.86) [Sun May 5 10:22:48 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 10:22:55 2013] Binned source spectrum to 10 counts/bin [Sun May 5 10:22:55 2013] Setting source spectrum file to fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4_src_b10.pi.gz [Sun May 5 10:22:55 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4_bgd.pi.gz [Sun May 5 10:57:04 2013] Updating aperture counts using extracted products [Sun May 5 10:57:04 2013] Total counts from fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4_src_b10.pi.gz = 4408.00 [Sun May 5 10:57:04 2013] Total counts from fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4_bgd.pi.gz = 3554.00 [Sun May 5 10:57:04 2013] Got source and background scale factors 3093856.000000, 13717924.000000 [Sun May 5 10:57:04 2013] User source parameters: Position = (329.5, 312.1) = 23 36 26.93 21 8 43.3 Extent = 17.3 (17.3-17.3)", rotation angle = 0 Source aperture counts = 3606.5 +/- 67.4 Background aperture counts = 801.5 Rate = 0.2 +/- 0.004 [Sun May 5 10:57:06 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 10:57:06 2013] Using photon index=1.80, rate=0.0182, arf fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4.arf [Sun May 5 10:57:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 10:57:06 2013] Updating source flux to 1.7e-13 [Sun May 5 10:57:11 2013] Flag b found in src. 4 procflags, skipping spectral fitting [Sun May 5 10:57:11 2013] Flag c found in src. 4 procflags, skipping spectral fitting [Sun May 5 10:57:15 2013] xmm0083150201/analysis//spectral/fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src4_pl.csv not found, spectral fit skipped or did not complete