[Sun May 5 00:52:37 2013] Detection parameters: Position = (311.2, 287.3) = 23 36 32.60 21 6 55.6 Extent = 10.9" x 10.9", rotation angle = 0 degrees Source counts = 118.7 +/- 16.9 Background counts = 36.1 Rate = 0.008 +/- 0.001 [Sun May 5 00:52:37 2013] Off-axis axis estimate = 1.23' [Sun May 5 03:11:36 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting [Sun May 5 03:11:36 2013] Initial guess for spatial extent in simple fitting = 7.04" [Sun May 5 03:11:36 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890 [Sun May 5 03:11:36 2013] Giving source the simple spatial ID 13 for pass 0, mean size = 7.04" [Sun May 5 04:50:46 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src13.ximg exists [Sun May 5 04:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src13.csv [Sun May 5 04:50:46 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src13_1.ximg exists [Sun May 5 04:50:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src13.csv [Sun May 5 04:50:46 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 04:50:47 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src13.ximg exists [Sun May 5 04:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src13.csv [Sun May 5 04:50:47 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg exists [Sun May 5 04:50:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src13.csv [Sun May 5 04:50:47 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src13_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 04:51:09 2013] Spatial fit model total counts = 919.219000, observed total counts = 815.000000 [Sun May 5 04:51:09 2013] Poor agreement between spatial fit and data for source 32 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 04:51:09 2013] Source 32 is offset by 1.792068 and -0.373796 pixels which is larger than 2 X fitted extent = 0.801462 x 1.200221, not incorporating fit results [Sun May 5 04:51:09 2013] Vigneting correction estimate = 1.000000 [Sun May 5 04:51:09 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 04:51:09 2013] Assessing source extent using major [Sun May 5 04:51:09 2013] Source does appear to be extended [Sun May 5 04:51:09 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 04:51:09 2013] Source is confused with source 33 [Sun May 5 06:13:54 2013] Using EEF radius (= 7.04 ")to estimate initial spatial extent for simple fitting [Sun May 5 06:13:54 2013] Initial guess for spatial extent in simple fitting = 7.04" [Sun May 5 06:13:54 2013] source mask rpix=1.6, npix_max = 17, mask sum = 16, frac = 0.890 [Sun May 5 06:13:54 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 7.04" [Sun May 5 07:31:58 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src12.ximg exists [Sun May 5 07:31:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src12.csv [Sun May 5 07:31:58 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src12_1.ximg exists [Sun May 5 07:31:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src12.csv [Sun May 5 07:31:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src12_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:31:58 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src12.ximg exists [Sun May 5 07:31:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src12.csv [Sun May 5 07:31:58 2013] fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists [Sun May 5 07:31:58 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src12.csv [Sun May 5 07:31:58 2013] It looks like the fit did not converge You should probably delete fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src12_1.ximg Either tweak this fit manually starting from fullrun_mos2_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes [Sun May 5 07:32:08 2013] Spatial fit model total counts = 916.918000, observed total counts = 815.000000 [Sun May 5 07:32:08 2013] Poor agreement between spatial fit and data for source 32 It may help to tweak spatial fit manually Not incorporating fit results [Sun May 5 07:32:08 2013] Vigneting correction estimate = 1.000000 [Sun May 5 07:32:08 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 [Sun May 5 07:32:08 2013] Assessing source extent using major [Sun May 5 07:32:08 2013] Source does appear to be extended [Sun May 5 07:32:08 2013] Computing asymmetry using major and minor axis, asym = 1.00 [Sun May 5 10:19:37 2013] XMMSAS src. selection expression = ellipse(27029.562347, 24942.297791, 652.500000, 652.500000, 0.000000, X, Y) [Sun May 5 10:19:37 2013] Writing source region out to fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32_src.reg [Sun May 5 10:19:37 2013] Extracting stamp from image fullrun_mos2_xmm0083150201_pi300-10000_cl_sm2.00.img.gz, (274, 250) - (349, 325) [Sun May 5 10:19:37 2013] XMMSAS bgd. selection expression = annulus(27029.562347, 24942.297791, 1087.500000, 2175.000000, X, Y) && !ellipse(27675.054600, 27186.838000, 1172.336034, 1172.336034, 0.000000, X, Y) && !ellipse(28616.146000, 27104.514000, 1384.368040, 1384.368040, 0.000000, X, Y) && !ellipse(28132.607544, 25959.306763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29221.970000, 27394.135400, 1315.056038, 704.312820, 48.996000, X, Y) && !ellipse(28585.345795, 26229.012604, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26408.362488, 27957.614563, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29042.990540, 26574.716003, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26132.178375, 26843.070435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27766.164200, 24652.211600, 1183.808034, 1183.808034, 0.000000, X, Y) && !ellipse(28961.943115, 25098.732117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29228.659393, 25702.496399, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26217.662354, 26224.923859, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29016.121400, 24562.080000, 1235.488036, 1235.488036, 0.000000, X, Y) && !ellipse(26229.647156, 25529.003510, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27032.419159, 25445.170959, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29362.914000, 26367.856000, 1241.656036, 524.174415, 212.352000, X, Y) && !ellipse(25536.827881, 26746.881378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29928.225098, 27453.294403, 870.000000, 870.000000, 0.000000, X, Y) [Sun May 5 10:19:37 2013] Writing fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32.gif [Sun May 5 10:23:53 2013] Mean detx,y = (-146.93, -2146.50) [Sun May 5 10:23:53 2013] Setting backscal keywords in source and bgd. spectrum [Sun May 5 10:23:59 2013] Binned source spectrum to 10 counts/bin [Sun May 5 10:23:59 2013] Setting source spectrum file to fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32_src_b10.pi.gz [Sun May 5 10:23:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32_bgd.pi.gz [Sun May 5 10:48:47 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done [Sun May 5 10:48:47 2013] rmf not generated due to insufficient counts [Sun May 5 10:57:04 2013] Updating aperture counts using extracted products [Sun May 5 10:57:04 2013] Total counts from fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32_src_b10.pi.gz = 574.00 [Sun May 5 10:57:05 2013] Total counts from fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32_bgd.pi.gz = 725.00 [Sun May 5 10:57:05 2013] Got source and background scale factors 1194820.000000, 3928184.000000 [Sun May 5 10:57:05 2013] User source parameters: Position = (311.2, 287.3) = 23 36 32.60 21 6 55.6 Extent = 10.9" x 10.9", rotation angle = 0 Source aperture counts = 353.5 +/- 25.0 Background aperture counts = 220.5 Rate = 0.02 +/- 0.002 [Sun May 5 10:57:05 2013] Updating counts from extracted products [Sun May 5 10:57:05 2013] Set source signif. to 353.48/14.85 = 23.80 [Sun May 5 10:57:06 2013] Calculating source flux in energy range 0.30-8.00 [Sun May 5 10:57:06 2013] Using photon index=1.80, rate=0.0235, arf fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32.arf [Sun May 5 10:57:06 2013] Assuming count rate is from the 0.30-10.00 bandpass [Sun May 5 10:57:06 2013] Updating source flux to 2.6e-13 [Sun May 5 10:57:11 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting [Sun May 5 10:57:15 2013] xmm0083150201/analysis//spectral/fullrun_mos2_xmm0083150201_pi300-10000_pass1_cl_src32_pl.csv not found, spectral fit skipped or did not complete