[Sun May  5 00:52:14 2013] Detection parameters:
  Position = (348.1, 375.6) = 23 36 21.13 21 13 27.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 167.6 +/- 16.8
  Background counts = 18.0
  Rate = 0.02 +/- 0.002

[Sun May  5 00:52:14 2013] Off-axis axis estimate = 6.65'
[Sun May  5 01:59:54 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Sun May  5 01:59:54 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Sun May  5 01:59:54 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.931
[Sun May  5 01:59:54 2013] Giving source the simple spatial ID 2 for pass 0, mean size = 9.75"
[Sun May  5 03:11:35 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass0_src2.ximg exists
[Sun May  5 03:11:35 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass0_src2_1.ximg exists
[Sun May  5 03:11:35 2013] Fit fullrun_mos1_xmm0083150201_pi300-10000_cl_pass0_src2 appears to have run properly
[Sun May  5 03:11:36 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2.ximg exists
[Sun May  5 03:11:36 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2_1.ximg exists
[Sun May  5 03:11:36 2013] Fit fullrun_mos1_xmm0083150201_pi300-10000_cl_pass0_tfrozen_src2 appears to have run properly
[Sun May  5 04:51:02 2013] Warning: source 2 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 5 at 12.408942 pixels away
[Sun May  5 04:51:02 2013] Vigneting correction estimate = 1.000000
[Sun May  5 04:51:02 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 04:51:02 2013] Assessing source extent using major
[Sun May  5 04:51:02 2013] Source does appear to be extended
[Sun May  5 04:51:02 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 05:34:19 2013] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Sun May  5 05:34:19 2013] Initial guess for spatial extent in simple fitting = 9.75"
[Sun May  5 05:34:19 2013] source mask rpix=2.2, npix_max = 30, mask sum = 28, frac = 0.931
[Sun May  5 05:34:19 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 9.75"
[Sun May  5 06:13:54 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_src2.ximg exists
[Sun May  5 06:13:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_src2.csv
[Sun May  5 06:13:54 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_src2_1.ximg exists
[Sun May  5 06:13:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_src2.csv
[Sun May  5 06:13:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 06:13:54 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Sun May  5 06:13:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 06:13:54 2013] fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Sun May  5 06:13:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2.csv
[Sun May  5 06:13:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083150201_pi300-10000_cl_pass1_tfrozen_src2.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Sun May  5 07:32:04 2013] Spatial fit model total counts = 368.417000, observed total counts = 296.000000
[Sun May  5 07:32:04 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Sun May  5 07:32:04 2013] Vigneting correction estimate = 1.000000
[Sun May  5 07:32:04 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Sun May  5 07:32:04 2013] Assessing source extent using major
[Sun May  5 07:32:04 2013] Source does appear to be extended
[Sun May  5 07:32:04 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Sun May  5 09:41:12 2013] XMMSAS src. selection expression = ellipse(30235.587219, 32624.794983, 652.500000, 652.500000, 0.000000, X, Y)
[Sun May  5 09:41:12 2013] Writing source region out to fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5_src.reg
[Sun May  5 09:41:12 2013] Extracting stamp from image fullrun_mos1_xmm0083150201_pi300-10000_cl_sm2.00.img.gz, (311, 338) - (386, 413)
[Sun May  5 09:41:12 2013] XMMSAS bgd. selection expression = annulus(30235.587219, 32624.794983, 1087.500000, 2175.000000, X, Y)
[Sun May  5 09:41:12 2013] Writing fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5.gif
[Sun May  5 09:43:57 2013] Mean detx,y = (6352.49, 530.09) 
[Sun May  5 09:43:58 2013] Setting backscal keywords in source and bgd. spectrum
[Sun May  5 09:44:07 2013] Binned source spectrum to 10 counts/bin
[Sun May  5 09:44:07 2013] Setting source spectrum file to fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Sun May  5 09:44:07 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Sun May  5 10:06:10 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Sun May  5 10:06:10 2013] rmf not generated due to insufficient counts
[Sun May  5 10:57:02 2013] Updating aperture counts using extracted products
[Sun May  5 10:57:02 2013] Total counts from fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 255.00
[Sun May  5 10:57:02 2013] Total counts from fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5_bgd.pi.gz = 917.00
[Sun May  5 10:57:02 2013] Got source and background scale factors 1179148.000000, 10521254.000000
[Sun May  5 10:57:02 2013] User source parameters:
  Position = (348.1, 375.6) = 23 36 21.13 21 13 27.8
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 152.2 +/- 17.0
  Background aperture counts = 102.8
  Rate = 0.01 +/- 0.001

[Sun May  5 10:57:02 2013] Updating counts from extracted products
[Sun May  5 10:57:02 2013] Set source signif. to 152.23/10.14 = 15.02
[Sun May  5 10:57:03 2013] Calculating source flux in energy range 0.30-8.00
[Sun May  5 10:57:03 2013] Using photon index=1.80, rate=0.0101, arf fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5.arf
[Sun May  5 10:57:03 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Sun May  5 10:57:03 2013] Updating source flux to 1.4e-13
[Sun May  5 10:57:07 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Sun May  5 10:57:11 2013] xmm0083150201/analysis//spectral/fullrun_mos1_xmm0083150201_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete