[Tue Aug 28 18:30:54 2012] Detection parameters:
  Position = (255.6, 217.5) = 7 35 32.48 43 40 1.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 72.6 +/- 12.9
  Background counts = 38.6
  Rate = 0.004 +/- 0.0008

[Tue Aug 28 18:30:55 2012] Off-axis axis estimate = 6.64'
[Tue Aug 28 18:32:47 2012] Using EEF radius (= 9.75 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 18:32:47 2012] Initial guess for spatial extent in simple fitting = 9.75"
[Tue Aug 28 18:32:47 2012] source mask rpix=2.2, npix_max = 30, mask sum = 25, frac = 0.832
[Tue Aug 28 18:32:47 2012] Giving source the simple spatial ID 31 for pass 0, mean size = 9.75"
[Tue Aug 28 19:24:01 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_src31.ximg exists
[Tue Aug 28 19:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_src31.csv
[Tue Aug 28 19:24:01 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_src31_1.ximg exists
[Tue Aug 28 19:24:01 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_src31.csv
[Tue Aug 28 19:24:01 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 19:24:02 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Tue Aug 28 19:24:02 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Tue Aug 28 19:24:02 2012] Fit fullrun_pn_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src31 appears to have run properly
[Tue Aug 28 20:29:23 2012] Spatial fit model total counts = 413.687000, observed total counts = 380.000000
[Tue Aug 28 20:29:23 2012] Offset between fit and detection position for source 33 = 0.792802 pixels
[Tue Aug 28 20:29:23 2012] 404.289800 total counts/ 307.336000 bgd. counts: snr = 5.530420
Spatial fit parameters:
  Offset between fit and detection position for source 33 = 0.792802 pixels
  Position = (254.8, 217.6) = 7 35 32.80 43 40 1.9
  Extent = 8.7 (6.3-11.7)", rotation angle = 0
  Source counts = 97.0 +/- 20.1
  Background counts = 307.3
  Rate = 0.004 +/- 0.0008
[Tue Aug 28 20:29:23 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 20:29:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 20:29:23 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 20:29:23 2012] Source does appear to be extended
[Tue Aug 28 20:29:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 20:29:39 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 20:29:39 2012] Initial guess for spatial extent in simple fitting = 8.74"
[Tue Aug 28 20:29:39 2012] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.993
[Tue Aug 28 20:29:39 2012] Giving source the simple spatial ID 30 for pass 1, mean size = 8.74"
[Tue Aug 28 21:27:49 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_src30.ximg exists
[Tue Aug 28 21:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_src30.csv
[Tue Aug 28 21:27:49 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_src30_1.ximg exists
[Tue Aug 28 21:27:49 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_src30.csv
[Tue Aug 28 21:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 21:27:49 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src30.ximg exists
[Tue Aug 28 21:27:49 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Tue Aug 28 21:27:49 2012] fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg exists
[Tue Aug 28 21:27:49 2012] Warning: model total counts is not > 0 in csv/fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src30.csv
[Tue Aug 28 21:27:49 2012] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src30_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src30.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 22:37:23 2012] Warning, spatial fit 30 centroid is now closest to src. 37
[Tue Aug 28 22:37:23 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:37:23 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:37:23 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 22:37:23 2012] Source does appear to be extended
[Tue Aug 28 22:37:23 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 22:37:43 2012] XMMSAS src. selection expression = ellipse(22117.677800, 18886.648200, 524.244015, 524.244015, 0.000000, X, Y)
[Tue Aug 28 22:37:43 2012] Writing source region out to fullrun_pn_xmm0083000101_pi300-10000_pass1_cl_src33_src.reg
[Tue Aug 28 22:37:43 2012] Extracting stamp from image fullrun_pn_xmm0083000101_pi300-10000_cl_sm2.00.img.gz, (225, 188) - (285, 248)
[Tue Aug 28 22:37:43 2012] XMMSAS bgd. selection expression = annulus(22117.677800, 18886.648200, 873.740025, 1747.480050, X, Y) && !ellipse(21498.366200, 20513.476800, 450.245613, 450.245613, 0.000000, X, Y) && !ellipse(24290.001800, 19520.882400, 473.801614, 473.801614, 0.000000, X, Y) && !ellipse(23258.592377, 18370.437851, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20722.190800, 17981.068400, 337.266410, 337.266410, 0.000000, X, Y)
[Tue Aug 28 22:37:43 2012] Writing fullrun_pn_xmm0083000101_pi300-10000_pass1_cl_src33.gif
[Tue Aug 28 22:53:55 2012] Mean detx,y = (3709.96, -4954.65) 
[Tue Aug 28 22:53:57 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 22:54:10 2012] grppha failed
[Tue Aug 28 22:54:10 2012] Setting source spectrum file to fullrun_pn_xmm0083000101_pi300-10000_pass1_cl_src33_src.pi.gz
[Tue Aug 28 22:54:10 2012] Setting bgd. spectrum file to fullrun_pn_xmm0083000101_pi300-10000_pass1_cl_src33_bgd.pi.gz
[Tue Aug 28 23:01:09 2012] Not generating rmf since there are only 96 counts
[Tue Aug 28 23:01:09 2012] rmf not generated due to insufficient counts
[Tue Aug 28 23:12:16 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:12:16 2012] Error reading totcts from fullrun_pn_xmm0083000101_pi300-10000_pass1_cl_src33_src.pi.gz
[Tue Aug 28 23:12:16 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:12:19 2012] Source 33 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Aug 28 23:12:20 2012] xmm0083000101/analysis//spectral/fullrun_pn_xmm0083000101_pi300-10000_pass1_cl_src33_pl.csv not found, spectral fit skipped or did not complete