[Tue Aug 28 18:31:10 2012] Detection parameters:
  Position = (279.7, 225.2) = 7 35 22.80 43 40 35.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 73.5 +/- 11.2
  Background counts = 12.9
  Rate = 0.003 +/- 0.0004

[Tue Aug 28 18:31:10 2012] Off-axis axis estimate = 5.48'
[Tue Aug 28 19:24:02 2012] Using EEF radius (= 9.17 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 19:24:02 2012] Initial guess for spatial extent in simple fitting = 9.17"
[Tue Aug 28 19:24:02 2012] source mask rpix=2.1, npix_max = 27, mask sum = 25, frac = 0.919
[Tue Aug 28 19:24:02 2012] Giving source the simple spatial ID 12 for pass 0, mean size = 9.17"
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src12.ximg exists
[Tue Aug 28 20:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src12.csv
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src12_1.ximg exists
[Tue Aug 28 20:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src12.csv
[Tue Aug 28 20:03:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src12_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src12.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src12.ximg exists
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src12_1.ximg exists
[Tue Aug 28 20:03:37 2012] Fit fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src12 appears to have run properly
[Tue Aug 28 20:29:26 2012] Source 20 is offset by 2.748605 and 3.208978 pixels which is larger than
2 X fitted extent = 1.121044 x 1.121044, not incorporating fit results
[Tue Aug 28 20:29:26 2012] Spatial fit model total counts = 227.516000, observed total counts = 209.000000
[Tue Aug 28 20:29:26 2012] Offset between fit and detection position for source 20 = 0.031145 pixels
[Tue Aug 28 20:29:26 2012] 220.125700 total counts/ 177.279000 bgd. counts: snr = 3.218020
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.031145 pixels
  Position = (279.7, 225.2) = 7 35 22.80 43 40 34.8
  Extent = 3.6 (2.7-4.6)", rotation angle = 0
  Source counts = 42.8 +/- 14.8
  Background counts = 177.3
  Rate = 0.001 +/- 0.0005
[Tue Aug 28 20:29:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 20:29:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 20:29:26 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 20:29:26 2012] Source does appear to be extended
[Tue Aug 28 20:29:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 21:27:49 2012] Using previous fit value to estimate initial spatial extent for simple fitting
[Tue Aug 28 21:27:49 2012] Initial guess for spatial extent in simple fitting = 3.64"
[Tue Aug 28 21:27:49 2012] source mask rpix=0.8, npix_max = 7, mask sum = 9, frac = 1.260
[Tue Aug 28 21:27:49 2012] Giving source the simple spatial ID 12 for pass 1, mean size = 3.64"
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src12.ximg exists
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src12_1.ximg exists
[Tue Aug 28 22:00:24 2012] Fit fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src12 appears to have run properly
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Tue Aug 28 22:00:24 2012] Fit fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Tue Aug 28 22:37:28 2012] Spatial fit model total counts = 227.049000, observed total counts = 209.000000
[Tue Aug 28 22:37:28 2012] Offset between fit and detection position for source 20 = 0.003529 pixels
[Tue Aug 28 22:37:28 2012] 222.722200 total counts/ 181.129000 bgd. counts: snr = 3.090497
Spatial fit parameters:
  Offset between fit and detection position for source 20 = 0.003529 pixels
  Position = (279.7, 225.2) = 7 35 22.80 43 40 34.8
  Extent = 3.5 (2.7-4.6)", rotation angle = 0
  Source counts = 41.6 +/- 14.9
  Background counts = 181.1
  Rate = 0.001 +/- 0.0005
[Tue Aug 28 22:37:28 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:37:28 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 22:37:28 2012] Source does appear to be extended
[Tue Aug 28 22:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 23:01:11 2012] XMMSAS src. selection expression = ellipse(24287.795800, 19544.727600, 212.374806, 212.374806, 0.000000, X, Y)
[Tue Aug 28 23:01:11 2012] Writing source region out to fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src20_src.reg
[Tue Aug 28 23:01:11 2012] Extracting stamp from image fullrun_mos1_xmm0083000101_pi300-10000_cl_sm2.00.img.gz, (268, 213) - (292, 237)
[Tue Aug 28 23:01:11 2012] XMMSAS bgd. selection expression = annulus(24287.795800, 19544.727600, 353.958010, 707.916020, X, Y) && !ellipse(23536.171200, 19587.831800, 562.140016, 562.140016, 0.000000, X, Y)
[Tue Aug 28 23:01:11 2012] Writing fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src20.gif
[Tue Aug 28 23:03:12 2012] Mean detx,y = (4676.53, 1139.42) 
[Tue Aug 28 23:03:13 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 23:03:18 2012] grppha failed
[Tue Aug 28 23:03:18 2012] Setting source spectrum file to fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src20_src.pi.gz
[Tue Aug 28 23:03:18 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src20_bgd.pi.gz
[Tue Aug 28 23:06:32 2012] Not generating rmf since there are only 41 counts
[Tue Aug 28 23:06:32 2012] rmf not generated due to insufficient counts
[Tue Aug 28 23:12:16 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:12:16 2012] Error reading totcts from fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src20_src.pi.gz
[Tue Aug 28 23:12:16 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:12:17 2012] Flag b found in src. 20 procflags, skipping spectral fitting
[Tue Aug 28 23:12:17 2012] Source 20 has fewer than 100.000000 counts, skipping spectral fitting
[Tue Aug 28 23:12:18 2012] xmm0083000101/analysis//spectral/fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src20_pl.csv not found, spectral fit skipped or did not complete