[Tue Aug 28 18:31:10 2012] Detection parameters:
  Position = (190.3, 187.9) = 7 35 58.61 43 37 51.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 200.2 +/- 18.0
  Background counts = 13.2
  Rate = 0.01 +/- 0.001

[Tue Aug 28 18:31:10 2012] Off-axis axis estimate = 11.21'
[Tue Aug 28 19:24:02 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 19:24:02 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 19:24:02 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Tue Aug 28 19:24:02 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984
[Tue Aug 28 19:24:02 2012] Giving source the simple spatial ID 1 for pass 0, mean size = 12.03"
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src1.ximg exists
[Tue Aug 28 20:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src1_1.ximg exists
[Tue Aug 28 20:03:37 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src1.csv
[Tue Aug 28 20:03:37 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src1.ximg exists
[Tue Aug 28 20:03:37 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src1_1.ximg exists
[Tue Aug 28 20:03:37 2012] Fit fullrun_mos1_xmm0083000101_pi300-10000_cl_pass0_tfrozen_src1 appears to have run properly
[Tue Aug 28 20:29:26 2012] Warning, spatial fit 1 centroid is now closest to src. 25
[Tue Aug 28 20:29:26 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 20:29:26 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 20:29:26 2012] Assessing source extent using major
[Tue Aug 28 20:29:26 2012] Source does appear to be extended
[Tue Aug 28 20:29:26 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 21:27:49 2012] Using EEF radius (= 12.03 ")to estimate initial spatial extent for simple fitting
[Tue Aug 28 21:27:49 2012] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Tue Aug 28 21:27:49 2012] Initial guess for spatial extent in simple fitting = 12.03"
[Tue Aug 28 21:27:49 2012] source mask rpix=2.8, npix_max = 42, mask sum = 42, frac = 0.984
[Tue Aug 28 21:27:49 2012] Giving source the simple spatial ID 1 for pass 1, mean size = 12.03"
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src1.ximg exists
[Tue Aug 28 22:00:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src1_1.ximg exists
[Tue Aug 28 22:00:24 2012] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src1.csv
[Tue Aug 28 22:00:24 2012] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src1_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_src1.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src1.ximg exists
[Tue Aug 28 22:00:24 2012] fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src1_1.ximg exists
[Tue Aug 28 22:00:24 2012] Fit fullrun_mos1_xmm0083000101_pi300-10000_cl_pass1_tfrozen_src1 appears to have run properly
[Tue Aug 28 22:37:28 2012] Spatial fit model total counts = 485.836000, observed total counts = 487.000000
[Tue Aug 28 22:37:28 2012] Offset between fit and detection position for source 1 = 0.114835 pixels
[Tue Aug 28 22:37:28 2012] 485.142000 total counts/ 348.293000 bgd. counts: snr = 7.332790
Spatial fit parameters:
  Offset between fit and detection position for source 1 = 0.114835 pixels
  Position = (190.2, 187.8) = 7 35 58.65 43 37 51.7
  Extent = 6.2 (5.3-7.4)", rotation angle = 0
  Source counts = 136.8 +/- 22.0
  Background counts = 348.3
  Rate = 0.005 +/- 0.0007
[Tue Aug 28 22:37:28 2012] Vigneting correction estimate = 1.000000
[Tue Aug 28 22:37:28 2012] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Tue Aug 28 22:37:28 2012] Assessing source extent using major axis lower bound
[Tue Aug 28 22:37:28 2012] Source does appear to be extended
[Tue Aug 28 22:37:28 2012] Computing asymmetry using major and minor axis, asym = 1.00
[Tue Aug 28 23:01:11 2012] XMMSAS src. selection expression = ellipse(16502.795400, 16291.386140, 371.962811, 371.962811, 0.000000, X, Y)
[Tue Aug 28 23:01:11 2012] Writing source region out to fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src1_src.reg
[Tue Aug 28 23:01:11 2012] Extracting stamp from image fullrun_mos1_xmm0083000101_pi300-10000_cl_sm2.00.img.gz, (169, 166) - (212, 209)
[Tue Aug 28 23:01:11 2012] XMMSAS bgd. selection expression = annulus(16502.795400, 16291.386140, 619.938018, 1239.876036, X, Y) && !ellipse(15591.814285, 18018.609299, 870.000000, 870.000000, 0.000000, X, Y)
[Tue Aug 28 23:01:11 2012] Writing fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src1.gif
[Tue Aug 28 23:01:13 2012] Mean detx,y = (6823.43, 9265.95) 
[Tue Aug 28 23:01:14 2012] Setting backscal keywords in source and bgd. spectrum
[Tue Aug 28 23:01:20 2012] grppha failed
[Tue Aug 28 23:01:20 2012] Setting source spectrum file to fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 23:01:20 2012] Setting bgd. spectrum file to fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src1_bgd.pi.gz
[Tue Aug 28 23:12:16 2012] Updating aperture counts using extracted products
[Tue Aug 28 23:12:16 2012] Error reading totcts from fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src1_src.pi.gz
[Tue Aug 28 23:12:16 2012] No arf file for this source, not re-computing flux
[Tue Aug 28 23:12:17 2012] Source 1 has no response, skipping
[Tue Aug 28 23:12:18 2012] xmm0083000101/analysis//spectral/fullrun_mos1_xmm0083000101_pi300-10000_pass1_cl_src1_pl.csv not found, spectral fit skipped or did not complete