[Mon Jun 17 00:54:33 2013] Detection parameters:
  Position = (306.6, 234.0) = 20 47 49.98 30 8 14.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 348.9 +/- 45.2
  Background counts = 901.7
  Rate = 0.03 +/- 0.004

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 4.71'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 8.78 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 8.78"
[Mon Jun 17 00:56:29 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.985
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 8.78"
[Mon Jun 17 00:56:35 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src84.ximg exists
[Mon Jun 17 00:56:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src84.csv
[Mon Jun 17 00:56:35 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src84_1.ximg exists
[Mon Jun 17 00:56:35 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src84.csv
[Mon Jun 17 00:56:35 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:40 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Mon Jun 17 00:56:40 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Mon Jun 17 00:56:40 2013] Fit fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Mon Jun 17 00:57:38 2013] Spatial fit model total counts = 2375.610000, observed total counts = 2208.000000
[Mon Jun 17 00:57:38 2013] Offset between fit and detection position for source 98 = 0.772119 pixels
[Mon Jun 17 00:57:38 2013] Warning, changing simple spatial fit ID from 84 to 82
[Mon Jun 17 00:57:38 2013] 2346.351600 total counts/ 2333.710000 bgd. counts: snr = 0.261685
Spatial fit parameters:
  Offset between fit and detection position for source 98 = 0.772119 pixels
  Position = (307.1, 234.6) = 20 47 49.83 30 8 17.4
  Extent = 2.1" x 2.1", rotation angle = 0
  Source counts = 12.6 +/- 48.4
  Background counts = 2333.7
  Rate = 0.004 +/- 0.01
  Deleting source due to low Poisson probability