[Mon Jun 17 00:54:30 2013] Detection parameters:
  Position = (271.9, 292.0) = 20 48 1.61 30 12 28.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 701.8 +/- 52.9
  Background counts = 872.1
  Rate = 0.08 +/- 0.006

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 1.98'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Mon Jun 17 00:56:29 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 54 for pass 0, mean size = 7.42"
[Mon Jun 17 00:56:34 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src54.ximg exists
[Mon Jun 17 00:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src54.csv
[Mon Jun 17 00:56:34 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src54_1.ximg exists
[Mon Jun 17 00:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src54.csv
[Mon Jun 17 00:56:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src54.ximg exists
[Mon Jun 17 00:56:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src54.csv
[Mon Jun 17 00:56:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src54_1.ximg exists
[Mon Jun 17 00:56:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src54.csv
[Mon Jun 17 00:56:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src54_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src54.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:57:37 2013] Spatial fit model total counts = 3715.690000, observed total counts = 3362.000000
[Mon Jun 17 00:57:37 2013] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 00:57:37 2013] Spatial fit model total counts = 2565.050000, observed total counts = 1955.000000
[Mon Jun 17 00:57:37 2013] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:36 2013] Using EEF radius (= 7.42 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 7.42"
[Mon Jun 17 00:59:36 2013] source mask rpix=1.7, npix_max = 19, mask sum = 16, frac = 0.823
[Mon Jun 17 00:59:36 2013] Giving source the simple spatial ID 48 for pass 1, mean size = 7.42"
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src48.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src48.csv
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src48_1.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src48.csv
[Mon Jun 17 00:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:42 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src48.ximg exists
[Mon Jun 17 00:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jun 17 00:59:42 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg exists
[Mon Jun 17 00:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src48.csv
[Mon Jun 17 00:59:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src48_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src48.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:00:36 2013] Spatial fit model total counts = 3715.390000, observed total counts = 3362.000000
[Mon Jun 17 01:00:36 2013] Poor agreement between spatial fit and data for source 67
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:25 2013] XMMSAS src. selection expression = ellipse(23610.797943, 25353.715820, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:02:25 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src.reg
[Mon Jun 17 01:02:25 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (234, 254) - (309, 329)
[Mon Jun 17 01:02:25 2013] XMMSAS bgd. selection expression = annulus(23610.797943, 25353.715820, 1087.500000, 2175.000000, X, Y) && !ellipse(25770.653656, 27944.124359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.335724, 27103.324371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23602.137238, 27547.311646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.726074, 27563.669281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23922.272705, 27441.354736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.646200, 26187.190000, 1186.720034, 1186.720034, 0.000000, X, Y) && !ellipse(23870.340332, 26570.021912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.227020, 26695.612762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.793854, 24799.653687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.722839, 24388.734802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23945.416000, 24048.348250, 943.680027, 943.680027, 0.000000, X, Y) && !ellipse(23399.473541, 24407.221771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.782990, 23775.027435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.608000, 23597.816000, 1231.664035, 1231.664035, 0.000000, X, Y) && !ellipse(25215.940000, 22670.112000, 2573.024074, 2573.024074, 0.000000, X, Y) && !ellipse(25514.196600, 22405.252000, 1254.056036, 1254.056036, 0.000000, X, Y) && !ellipse(26988.710000, 21619.146000, 2618.624075, 2618.624075, 0.000000, X, Y)
[Mon Jun 17 01:02:25 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67.gif
[Mon Jun 17 01:02:40 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:40 2013] Mean detx,y = (-2865.84, 3063.51) 
[Mon Jun 17 01:02:40 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:40 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:40 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src_b10.pi.gz
[Mon Jun 17 01:02:40 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_bgd.pi.gz
[Mon Jun 17 01:02:40 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 01:03:21 2013] rmf not generated due to insufficient counts
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67.arf exists, delete to re-create
[Tue Jun 18 10:27:36 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:36 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_src_b10.pi.gz = 2488.00
[Tue Jun 18 10:27:36 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_bgd.pi.gz = 2941.00
[Tue Jun 18 10:27:36 2013] Got source and background scale factors 1240142.000000, 3215885.000000
[Tue Jun 18 10:27:36 2013] User source parameters:
  Position = (271.9, 292.0) = 20 48 1.61 30 12 28.1
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 1353.9 +/- 50.9
  Background aperture counts = 1134.1
  Rate = 0.4 +/- 0.02

[Tue Jun 18 10:27:36 2013] Updating counts from extracted products
[Tue Jun 18 10:27:36 2013] Set source signif. to 1353.86/33.68 = 40.20
[Tue Jun 18 10:27:59 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:27:59 2013] Using photon index=1.80, rate=0.407, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67.arf
[Tue Jun 18 10:27:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:27:59 2013] Updating source flux to 1.9e-12
[Tue Jun 18 10:30:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src67_pl.csv not found, spectral fit skipped or did not complete