[Mon Jun 17 00:54:29 2013] Detection parameters:
  Position = (290.9, 317.4) = 20 47 55.24 30 14 12.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 376.6 +/- 32.8
  Background counts = 1165.0
  Rate = 0.03 +/- 0.003

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 1.48'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 7.17"
[Mon Jun 17 00:56:29 2013] source mask rpix=1.6, npix_max = 18, mask sum = 11, frac = 0.596
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 49 for pass 0, mean size = 7.17"
[Mon Jun 17 00:56:34 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src49.ximg exists
[Mon Jun 17 00:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src49.csv
[Mon Jun 17 00:56:34 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src49_1.ximg exists
[Mon Jun 17 00:56:34 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src49.csv
[Mon Jun 17 00:56:34 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src49.ximg exists
[Mon Jun 17 00:56:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 17 00:56:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src49_1.ximg exists
[Mon Jun 17 00:56:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src49.csv
[Mon Jun 17 00:56:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:57:37 2013] Spatial fit model total counts = 3419.450000, observed total counts = 2728.000000
[Mon Jun 17 00:57:37 2013] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:57:38 2013] Source is confused with source 3
[Mon Jun 17 00:59:36 2013] Using EEF radius (= 7.17 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 7.17"
[Mon Jun 17 00:59:36 2013] source mask rpix=1.6, npix_max = 18, mask sum = 11, frac = 0.596
[Mon Jun 17 00:59:36 2013] Giving source the simple spatial ID 43 for pass 1, mean size = 7.17"
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src43.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src43.csv
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src43_1.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src43.csv
[Mon Jun 17 00:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src43.ximg exists
[Mon Jun 17 00:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src43_1.ximg exists
[Mon Jun 17 00:59:42 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src43.csv
[Mon Jun 17 00:59:42 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src43_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src43.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:00:35 2013] Spatial fit model total counts = 3285.550000, observed total counts = 2565.000000
[Mon Jun 17 01:00:35 2013] Poor agreement between spatial fit and data for source 62
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:25 2013] XMMSAS src. selection expression = ellipse(25260.726074, 27563.669281, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:02:25 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src.reg
[Mon Jun 17 01:02:25 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (253, 280) - (328, 355)
[Mon Jun 17 01:02:25 2013] XMMSAS bgd. selection expression = annulus(25260.726074, 27563.669281, 1087.500000, 2175.000000, X, Y) && !ellipse(26629.178619, 29604.401794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26378.371277, 29176.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.653656, 27944.124359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.335724, 27103.324371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.620453, 30216.072754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23602.137238, 27547.311646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.704773, 30396.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.112000, 30734.476000, 1343.560039, 1343.560039, 0.000000, X, Y) && !ellipse(27225.352000, 30014.980000, 860.608025, 860.608025, 0.000000, X, Y) && !ellipse(23130.041168, 29884.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.097778, 29719.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27364.254000, 30083.982000, 1307.232038, 1307.232038, 0.000000, X, Y) && !ellipse(23829.909546, 29576.165558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.467377, 29263.615509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25046.765228, 28864.715942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.397552, 28488.153137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23922.272705, 27441.354736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.646200, 26187.190000, 1186.720034, 1186.720034, 0.000000, X, Y) && !ellipse(23870.340332, 26570.021912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.227020, 26695.612762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23610.797943, 25353.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.793854, 24799.653687, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:02:25 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62.gif
[Mon Jun 17 01:02:39 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:39 2013] Mean detx,y = (-2580.69, 319.74) 
[Mon Jun 17 01:02:39 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:39 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:39 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src_b10.pi.gz
[Mon Jun 17 01:02:39 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_bgd.pi.gz
[Mon Jun 17 01:02:39 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 01:03:21 2013] rmf not generated due to insufficient counts
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62.arf exists, delete to re-create
[Tue Jun 18 10:27:34 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:35 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_src_b10.pi.gz = 1683.00
[Tue Jun 18 10:27:35 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_bgd.pi.gz = 3411.00
[Tue Jun 18 10:27:35 2013] Got source and background scale factors 998958.000000, 3633687.000000
[Tue Jun 18 10:27:35 2013] User source parameters:
  Position = (290.9, 317.4) = 20 47 55.24 30 14 12.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 745.3 +/- 42.0
  Background aperture counts = 937.7
  Rate = 0.2 +/- 0.01

[Tue Jun 18 10:27:35 2013] Updating counts from extracted products
[Tue Jun 18 10:27:35 2013] Set source signif. to 745.26/30.62 = 24.34
[Tue Jun 18 10:27:59 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:27:59 2013] Using photon index=1.80, rate=0.224, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62.arf
[Tue Jun 18 10:27:59 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:27:59 2013] Updating source flux to 1.9e-12
[Tue Jun 18 10:30:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src62_pl.csv not found, spectral fit skipped or did not complete