[Mon Jun 17 00:54:22 2013] Detection parameters:
  Position = (323.4, 199.4) = 20 47 44.34 30 5 38.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 1353.5 +/- 205.9
  Background counts = 843.4
  Rate = 0.1 +/- 0.02

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 7.40'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Mon Jun 17 00:56:29 2013] source mask rpix=2.3, npix_max = 32, mask sum = 5, frac = 0.156
[Mon Jun 17 00:56:29 2013] Skipping simple spatial due to low active detector fraction
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:57:38 2013] Source is confused with source 117
[Mon Jun 17 00:59:36 2013] Using EEF radius (= 10.13 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 10.13"
[Mon Jun 17 00:59:36 2013] source mask rpix=2.3, npix_max = 32, mask sum = 5, frac = 0.156
[Mon Jun 17 00:59:36 2013] Skipping simple spatial due to low active detector fraction
[Mon Jun 17 01:00:36 2013] Source 5 is offset by 3.634371 and -1.442216 pixels which is larger than
2 X fitted extent = 1.955940 x 1.955940, not incorporating fit results
[Mon Jun 17 01:00:36 2013] Spatial fit model total counts = 2244.540000, observed total counts = 1836.000000
[Mon Jun 17 01:00:36 2013] Poor agreement between spatial fit and data for source 5
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:19 2013] Counts = 1353.531860, rescaling region sizes by 2.000000
[Mon Jun 17 01:02:19 2013] XMMSAS src. selection expression = ellipse(28090.119110, 17303.307236, 1305.000000, 1305.000000, 0.000000, X, Y)
[Mon Jun 17 01:02:19 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src.reg
[Mon Jun 17 01:02:19 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (248, 124) - (398, 274)
[Mon Jun 17 01:02:19 2013] XMMSAS bgd. selection expression = annulus(28090.119110, 17303.307236, 4350.000000, 8700.000000, X, Y) && !ellipse(31806.857452, 15174.366684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(18977.996170, 18799.501205, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31099.140808, 15883.909988, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29811.847198, 15276.189713, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30704.839752, 15023.238434, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31961.690796, 14134.483307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31702.501526, 14747.690201, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32484.336000, 13302.234000, 1437.488041, 1437.488041, 0.000000, X, Y) && !ellipse(32245.858582, 12916.768723, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32947.690000, 12922.574000, 3035.824087, 3035.824087, 0.000000, X, Y) && !ellipse(31464.982605, 13002.560684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31596.486206, 12574.506241, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24032.646200, 26187.190000, 1186.720034, 1186.720034, 0.000000, X, Y) && !ellipse(23870.340332, 26570.021912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.227020, 26695.612762, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23610.797943, 25353.715820, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24268.793854, 24799.653687, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24656.722839, 24388.734802, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23945.416000, 24048.348250, 943.680027, 943.680027, 0.000000, X, Y) && !ellipse(23399.473541, 24407.221771, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25076.782990, 23775.027435, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28453.337738, 23565.946533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27822.385956, 23087.720001, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24043.608000, 23597.816000, 1231.664035, 1231.664035, 0.000000, X, Y) && !ellipse(27653.524000, 22292.113300, 1309.312038, 1309.312038, 0.000000, X, Y) && !ellipse(33207.061493, 12571.812714, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28284.852234, 22741.947571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25215.940000, 22670.112000, 2573.024074, 2573.024074, 0.000000, X, Y) && !ellipse(25514.196600, 22405.252000, 1254.056036, 1254.056036, 0.000000, X, Y) && !ellipse(23936.856781, 22232.893494, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25942.218000, 21751.732000, 1286.512037, 1286.512037, 0.000000, X, Y) && !ellipse(28305.134003, 21875.870377, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26988.710000, 21619.146000, 2618.624075, 2618.624075, 0.000000, X, Y) && !ellipse(27306.715546, 21694.500015, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21033.740219, 21531.559540, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27172.745422, 21269.083344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27810.294952, 21361.515533, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21628.955307, 21516.974136, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26067.273529, 21350.944534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21355.387726, 21031.962677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27278.274872, 20911.608871, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21034.329636, 20391.661209, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27165.775970, 20219.726822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26486.561066, 20828.916656, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28418.259491, 19713.723373, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20733.990067, 19715.046906, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(19908.960953, 19126.438858, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37595.296000, 18757.360000, 1954.952056, 1954.952056, 0.000000, X, Y) && !ellipse(28310.454681, 18735.605270, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29547.959760, 18626.284000, 1612.520046, 1612.520046, 0.000000, X, Y) && !ellipse(27894.273529, 18304.494888, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30198.932200, 18124.291200, 976.032028, 976.032028, 0.000000, X, Y) && !ellipse(29613.245697, 17975.081421, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28964.409637, 17783.676376, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28081.280518, 17887.530502, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37308.460480, 17485.825897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30465.972076, 17163.932800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.134125, 17260.760391, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29811.764893, 16916.089798, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20971.842194, 16667.048050, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30466.978333, 16651.254608, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28659.906982, 16644.090012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28391.709198, 16220.517258, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20960.124222, 16134.530151, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30183.267212, 15875.562576, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29573.420258, 15785.697800, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21097.571106, 15703.324188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20558.162079, 15699.169067, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28830.505890, 15870.467575, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(20756.285675, 15047.862503, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30246.308228, 14146.267654, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21335.739182, 14458.430069, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32763.488000, 13450.610000, 1992.456057, 1992.456057, 0.000000, X, Y) && !ellipse(30656.287231, 13683.793411, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23127.457825, 13333.458313, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29857.391571, 13545.077423, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33648.903503, 12920.629135, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30543.862671, 12837.058105, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30586.316589, 11705.893494, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:02:19 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5.gif
[Mon Jun 17 01:02:36 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:36 2013] Mean detx,y = (4993.68, 7999.84) 
[Mon Jun 17 01:02:36 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:36 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:36 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src_b10.pi.gz
[Mon Jun 17 01:02:36 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_bgd.pi.gz
[Mon Jun 17 01:02:36 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 01:03:21 2013] rmf not generated due to insufficient counts
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5.arf exists, delete to re-create
[Tue Jun 18 10:27:20 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:20 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_src_b10.pi.gz = 5138.00
[Tue Jun 18 10:27:21 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_bgd.pi.gz = 37910.00
[Tue Jun 18 10:27:21 2013] Got source and background scale factors 4683934.000000, 67861015.000000
[Tue Jun 18 10:27:21 2013] User source parameters:
  Position = (323.4, 199.4) = 20 47 44.34 30 5 38.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 2521.4 +/- 72.7
  Background aperture counts = 2616.6
  Rate = 0.8 +/- 0.02

[Tue Jun 18 10:27:21 2013] Updating counts from extracted products
[Tue Jun 18 10:27:21 2013] Set source signif. to 2521.36/51.15 = 49.29
[Tue Jun 18 10:27:57 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:27:57 2013] Using photon index=1.80, rate=0.758, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5.arf
[Tue Jun 18 10:27:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:27:57 2013] Updating source flux to 9.5e-12
[Tue Jun 18 10:30:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src5_pl.csv not found, spectral fit skipped or did not complete