[Mon Jun 17 00:54:27 2013] Detection parameters:
  Position = (272.9, 354.9) = 20 48 1.29 30 17 0.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 943.8 +/- 53.7
  Background counts = 658.7
  Rate = 0.1 +/- 0.008

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 4.49'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 8.67 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 8.67"
[Mon Jun 17 00:56:29 2013] source mask rpix=2.0, npix_max = 24, mask sum = 25, frac = 1.005
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 31 for pass 0, mean size = 8.67"
[Mon Jun 17 00:56:33 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src31.ximg exists
[Mon Jun 17 00:56:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src31.csv
[Mon Jun 17 00:56:33 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src31_1.ximg exists
[Mon Jun 17 00:56:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src31.csv
[Mon Jun 17 00:56:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:37 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src31.ximg exists
[Mon Jun 17 00:56:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Jun 17 00:56:37 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg exists
[Mon Jun 17 00:56:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src31.csv
[Mon Jun 17 00:56:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src31_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src31.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:57:37 2013] Source 43 is offset by 5.169769 and -1.127810 pixels which is larger than
2 X fitted extent = 1.188672 x 7.691071, not incorporating fit results
[Mon Jun 17 00:57:37 2013] Source 43 is offset by 4.575984 and 0.219248 pixels which is larger than
2 X fitted extent = 3.765444 x 3.765444, not incorporating fit results
[Mon Jun 17 00:57:37 2013] Spatial fit model total counts = 4042.650000, observed total counts = 3734.000000
[Mon Jun 17 00:57:37 2013] Offset between fit and detection position for source 43 = 2.511600 pixels
[Mon Jun 17 00:57:37 2013] Warning, changing simple spatial fit ID from 31 to 30
[Mon Jun 17 00:57:37 2013] 4038.794000 total counts/ 3606.700000 bgd. counts: snr = 7.194875
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 2.511600 pixels
  Position = (275.2, 353.9) = 20 48 0.51 30 16 56.2
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 432.1 +/- 63.6
  Background counts = 3606.7
  Rate = 0.1 +/- 0.02
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:57:38 2013] Source is confused with source 42
[Mon Jun 17 00:59:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 16.79"
[Mon Jun 17 00:59:36 2013] source mask rpix=3.9, npix_max = 76, mask sum = 72, frac = 0.947
[Mon Jun 17 00:59:36 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 16.79"
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src27.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src27.csv
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src27.csv
[Mon Jun 17 00:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Jun 17 00:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Jun 17 00:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27.csv
[Mon Jun 17 00:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:00:35 2013] Spatial fit model total counts = 4037.810000, observed total counts = 3734.000000
[Mon Jun 17 01:00:35 2013] Offset between fit and detection position for source 43 = 0.059968 pixels
[Mon Jun 17 01:00:35 2013] Warning, changing simple spatial fit ID from 27 to 26
[Mon Jun 17 01:00:35 2013] 4036.635000 total counts/ 3595.550000 bgd. counts: snr = 7.355964
Spatial fit parameters:
  Offset between fit and detection position for source 43 = 0.059968 pixels
  Position = (275.2, 353.8) = 20 48 0.53 30 16 56.0
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source counts = 441.1 +/- 63.5
  Background counts = 3595.6
  Rate = 0.1 +/- 0.02
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:24 2013] XMMSAS src. selection expression = ellipse(23893.112000, 30734.476000, 1007.670029, 1007.670029, 0.000000, X, Y)
[Mon Jun 17 01:02:24 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src.reg
[Mon Jun 17 01:02:24 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (217, 296) - (333, 412)
[Mon Jun 17 01:02:24 2013] XMMSAS bgd. selection expression = annulus(23893.112000, 30734.476000, 1679.450048, 3358.900097, X, Y) && !ellipse(26629.178619, 29604.401794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26378.371277, 29176.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25770.653656, 27944.124359, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.335724, 27103.324371, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22645.620453, 30216.072754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23602.137238, 27547.311646, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21021.516464, 34569.208344, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21535.755200, 33390.616000, 1624.952047, 1624.952047, 0.000000, X, Y) && !ellipse(21890.377457, 33129.412506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.774000, 32419.336000, 1425.672041, 1425.672041, 0.000000, X, Y) && !ellipse(22808.880859, 32230.339935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.837524, 31893.079529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.706635, 31685.034088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25133.552826, 31530.123749, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.172394, 31429.083954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21975.842850, 31445.141571, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.433167, 31460.296478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.328583, 31284.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.704773, 30396.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27840.158722, 30913.240967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.352000, 30014.980000, 860.608025, 860.608025, 0.000000, X, Y) && !ellipse(23130.041168, 29884.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25174.097778, 29719.789368, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27364.254000, 30083.982000, 1307.232038, 1307.232038, 0.000000, X, Y) && !ellipse(23829.909546, 29576.165558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.467377, 29263.615509, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25046.765228, 28864.715942, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25199.397552, 28488.153137, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25260.726074, 27563.669281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23922.272705, 27441.354736, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23870.340332, 26570.021912, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23043.227020, 26695.612762, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:02:24 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43.gif
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:38 2013] Mean detx,y = (-5025.67, -1889.81) 
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:38 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src_b10.pi.gz
[Mon Jun 17 01:02:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_bgd.pi.gz
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43.rmf exists, delete to re-create
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43.arf exists, delete to re-create
[Tue Jun 18 10:27:30 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:30 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_src_b10.pi.gz = 5011.00
[Tue Jun 18 10:27:31 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_bgd.pi.gz = 5876.00
[Tue Jun 18 10:27:31 2013] Got source and background scale factors 2757596.000000, 6309024.000000
[Tue Jun 18 10:27:31 2013] User source parameters:
  Position = (275.2, 353.8) = 20 48 0.53 30 16 56.0
  Extent = 16.8 (16.8-33.6)", rotation angle = 0
  Source aperture counts = 2442.7 +/- 71.8
  Background aperture counts = 2568.3
  Rate = 0.7 +/- 0.02

[Tue Jun 18 10:27:58 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:27:58 2013] Using photon index=1.80, rate=0.133, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43.arf
[Tue Jun 18 10:27:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:27:58 2013] Updating source flux to 6.3e-13
[Tue Jun 18 10:30:31 2013] Flag b found in src. 43 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] Flag c found in src. 43 procflags, skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src43_pl.csv not found, spectral fit skipped or did not complete