[Mon Jun 17 00:54:26 2013] Detection parameters:
  Position = (327.7, 357.0) = 20 47 42.89 30 17 7.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 233.0 +/- 43.8
  Background counts = 860.2
  Rate = 0.03 +/- 0.007

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 4.75'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Mon Jun 17 00:56:29 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.981
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.80"
[Mon Jun 17 00:56:33 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jun 17 00:56:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src27.csv
[Mon Jun 17 00:56:33 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jun 17 00:56:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src27.csv
[Mon Jun 17 00:56:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:37 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jun 17 00:56:37 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jun 17 00:56:37 2013] Fit fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Jun 17 00:57:37 2013] Spatial fit model total counts = 3598.610000, observed total counts = 2007.000000
[Mon Jun 17 00:57:37 2013] Poor agreement between spatial fit and data for source 39
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 00:57:37 2013] Source 39 is offset by -1.281848 and 1.707620 pixels which is larger than
2 X fitted extent = 1.603467 x 1.603467, not incorporating fit results
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:57:38 2013] Source is confused with source 35
[Mon Jun 17 00:59:36 2013] Using EEF radius (= 8.80 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 8.80"
[Mon Jun 17 00:59:36 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.981
[Mon Jun 17 00:59:36 2013] Giving source the simple spatial ID 25 for pass 1, mean size = 8.80"
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src25.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src25.csv
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src25_1.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src25.csv
[Mon Jun 17 00:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src25.ximg exists
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src25_1.ximg exists
[Mon Jun 17 00:59:41 2013] Fit fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src25 appears to have run properly
[Mon Jun 17 01:00:35 2013] Source 39 is offset by -1.305735 and 1.683000 pixels which is larger than
2 X fitted extent = 1.474147 x 1.474147, not incorporating fit results
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:24 2013] XMMSAS src. selection expression = ellipse(28460.936432, 31012.862976, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:02:24 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src.reg
[Mon Jun 17 01:02:24 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (290, 320) - (365, 395)
[Mon Jun 17 01:02:24 2013] XMMSAS bgd. selection expression = annulus(28460.936432, 31012.862976, 1087.500000, 2175.000000, X, Y) && !ellipse(26629.178619, 29604.401794, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26378.371277, 29176.865082, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.774000, 32419.336000, 1425.672041, 1425.672041, 0.000000, X, Y) && !ellipse(28567.599579, 32232.756012, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26767.837524, 31893.079529, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28093.172394, 31429.083954, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26435.433167, 31460.296478, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27840.158722, 30913.240967, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27225.352000, 30014.980000, 860.608025, 860.608025, 0.000000, X, Y) && !ellipse(27364.254000, 30083.982000, 1307.232038, 1307.232038, 0.000000, X, Y) && !ellipse(29072.055145, 29286.456726, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30006.699799, 28764.156708, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:02:24 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39.gif
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:38 2013] Mean detx,y = (-1226.71, -4188.14) 
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:38 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src_b10.pi.gz
[Mon Jun 17 01:02:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_bgd.pi.gz
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 01:03:21 2013] rmf not generated due to insufficient counts
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39.arf exists, delete to re-create
[Tue Jun 18 10:27:30 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:30 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_src_b10.pi.gz = 1970.00
[Tue Jun 18 10:27:30 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_bgd.pi.gz = 3234.00
[Tue Jun 18 10:27:30 2013] Got source and background scale factors 1340800.000000, 2970512.000000
[Tue Jun 18 10:27:30 2013] User source parameters:
  Position = (327.7, 357.0) = 20 47 42.89 30 17 7.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 510.3 +/- 45.4
  Background aperture counts = 1459.7
  Rate = 0.2 +/- 0.01

[Tue Jun 18 10:27:30 2013] Updating counts from extracted products
[Tue Jun 18 10:27:30 2013] Set source signif. to 510.27/38.21 = 13.36
[Tue Jun 18 10:27:58 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:27:58 2013] Using photon index=1.80, rate=0.153, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39.arf
[Tue Jun 18 10:27:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:27:58 2013] Updating source flux to 7.1e-13
[Tue Jun 18 10:30:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src39_pl.csv not found, spectral fit skipped or did not complete