[Mon Jun 17 00:54:26 2013] Detection parameters:
  Position = (253.2, 362.0) = 20 48 7.93 30 17 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 211.6 +/- 32.9
  Background counts = 499.6
  Rate = 0.02 +/- 0.003

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 5.66'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Mon Jun 17 00:56:29 2013] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.050
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 25 for pass 0, mean size = 9.26"
[Mon Jun 17 00:56:33 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src25.ximg exists
[Mon Jun 17 00:56:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src25.csv
[Mon Jun 17 00:56:33 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src25_1.ximg exists
[Mon Jun 17 00:56:33 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src25.csv
[Mon Jun 17 00:56:33 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:37 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src25.ximg exists
[Mon Jun 17 00:56:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 17 00:56:37 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg exists
[Mon Jun 17 00:56:37 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src25.csv
[Mon Jun 17 00:56:37 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src25_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src25.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:57:37 2013] Warning, spatial fit 25 centroid is now closest to src. 29
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:57:38 2013] Source is confused with source 38
[Mon Jun 17 00:59:36 2013] Using EEF radius (= 9.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 9.26"
[Mon Jun 17 00:59:36 2013] source mask rpix=2.1, npix_max = 27, mask sum = 29, frac = 1.050
[Mon Jun 17 00:59:36 2013] Giving source the simple spatial ID 23 for pass 1, mean size = 9.26"
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src23.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src23.csv
[Mon Jun 17 00:59:38 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src23_1.ximg exists
[Mon Jun 17 00:59:38 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src23.csv
[Mon Jun 17 00:59:38 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src23.ximg exists
[Mon Jun 17 00:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jun 17 00:59:41 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src23_1.ximg exists
[Mon Jun 17 00:59:41 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src23.csv
[Mon Jun 17 00:59:41 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src23_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src23.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:00:35 2013] Source 36 is offset by -1.238887 and -1.396373 pixels which is larger than
2 X fitted extent = 1.075968 x 1.075968, not incorporating fit results
[Mon Jun 17 01:00:35 2013] Spatial fit model total counts = 1707.460000, observed total counts = 1206.000000
[Mon Jun 17 01:00:35 2013] Poor agreement between spatial fit and data for source 36
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:23 2013] XMMSAS src. selection expression = ellipse(21975.842850, 31445.141571, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:02:23 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src.reg
[Mon Jun 17 01:02:23 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (216, 324) - (291, 399)
[Mon Jun 17 01:02:23 2013] XMMSAS bgd. selection expression = annulus(21975.842850, 31445.141571, 1087.500000, 2175.000000, X, Y) && !ellipse(22645.620453, 30216.072754, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(21535.755200, 33390.616000, 1624.952047, 1624.952047, 0.000000, X, Y) && !ellipse(21890.377457, 33129.412506, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25052.774000, 32419.336000, 1425.672041, 1425.672041, 0.000000, X, Y) && !ellipse(22808.880859, 32230.339935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24434.706635, 31685.034088, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22561.328583, 31284.392822, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24418.704773, 30396.949280, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23893.112000, 30734.476000, 1343.560039, 1343.560039, 0.000000, X, Y) && !ellipse(19431.755280, 30580.592346, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23130.041168, 29884.977325, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23829.909546, 29576.165558, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24400.467377, 29263.615509, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:02:23 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36.gif
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:38 2013] Mean detx,y = (-6988.85, -1645.63) 
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:38 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src_b10.pi.gz
[Mon Jun 17 01:02:38 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_bgd.pi.gz
[Mon Jun 17 01:02:38 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 01:03:21 2013] rmf not generated due to insufficient counts
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36.arf exists, delete to re-create
[Tue Jun 18 10:27:29 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:29 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_src_b10.pi.gz = 909.00
[Tue Jun 18 10:27:29 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_bgd.pi.gz = 2315.00
[Tue Jun 18 10:27:29 2013] Got source and background scale factors 933252.000000, 2914501.000000
[Tue Jun 18 10:27:29 2013] User source parameters:
  Position = (253.2, 362.0) = 20 48 7.93 30 17 31.3
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 167.7 +/- 31.2
  Background aperture counts = 741.3
  Rate = 0.05 +/- 0.009

[Tue Jun 18 10:27:29 2013] Updating counts from extracted products
[Tue Jun 18 10:27:29 2013] Set source signif. to 167.71/27.23 = 6.16
[Tue Jun 18 10:27:58 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:27:58 2013] Using photon index=1.80, rate=0.0504, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36.arf
[Tue Jun 18 10:27:58 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:27:58 2013] Updating source flux to 3.7e-13
[Tue Jun 18 10:30:31 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src36_pl.csv not found, spectral fit skipped or did not complete