[Mon Jun 17 00:54:34 2013] Detection parameters:
  Position = (437.6, 217.7) = 20 47 6.05 30 7 1.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 131.9 +/- 30.2
  Background counts = 375.7
  Rate = 0.01 +/- 0.003

[Mon Jun 17 00:54:38 2013] Off-axis axis estimate = 11.66'
[Mon Jun 17 00:56:29 2013] Using EEF radius (= 12.26 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:29 2013] Initial guess for spatial extent in simple fitting = 12.26"
[Mon Jun 17 00:56:29 2013] source mask rpix=2.8, npix_max = 44, mask sum = 49, frac = 1.112
[Mon Jun 17 00:56:29 2013] Giving source the simple spatial ID 92 for pass 0, mean size = 12.26"
[Mon Jun 17 00:56:35 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src92.ximg exists
[Mon Jun 17 00:56:35 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src92_1.ximg exists
[Mon Jun 17 00:56:35 2013] Fit fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_src92 appears to have run properly
[Mon Jun 17 00:56:40 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src92.ximg exists
[Mon Jun 17 00:56:40 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src92_1.ximg exists
[Mon Jun 17 00:56:40 2013] Fit fullrun_pn_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src92 appears to have run properly
[Mon Jun 17 00:57:38 2013] Spatial fit model total counts = 945.037000, observed total counts = 943.000000
[Mon Jun 17 00:57:38 2013] Offset between fit and detection position for source 106 = 5.184590 pixels
[Mon Jun 17 00:57:38 2013] 943.708000 total counts/ 697.564000 bgd. counts: snr = 9.319599
Spatial fit parameters:
  Offset between fit and detection position for source 106 = 5.184590 pixels
  Position = (432.7, 216.2) = 20 47 7.71 30 6 56.7
  Extent = 24.4 (24.3-24.5)", rotation angle = 0
  Source counts = 246.1 +/- 30.7
  Background counts = 697.6
  Rate = 0.07 +/- 0.009
[Mon Jun 17 00:57:38 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:57:38 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:57:38 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:57:38 2013] Source does appear to be extended
[Mon Jun 17 00:57:38 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:57:38 2013] Source is confused with source 104
[Mon Jun 17 00:59:36 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:36 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:59:36 2013] Initial guess for spatial extent in simple fitting = 24.44"
[Mon Jun 17 00:59:36 2013] source mask rpix=5.6, npix_max = 149, mask sum = 144, frac = 0.962
[Mon Jun 17 00:59:36 2013] Giving source the simple spatial ID 82 for pass 1, mean size = 24.44"
[Mon Jun 17 00:59:39 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src82.ximg exists
[Mon Jun 17 00:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src82.csv
[Mon Jun 17 00:59:40 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src82_1.ximg exists
[Mon Jun 17 00:59:40 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src82.csv
[Mon Jun 17 00:59:40 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:43 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src82.ximg exists
[Mon Jun 17 00:59:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src82.csv
[Mon Jun 17 00:59:43 2013] fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src82_1.ximg exists
[Mon Jun 17 00:59:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src82.csv
[Mon Jun 17 00:59:44 2013] It looks like the fit did not converge
You should probably delete fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src82_1.ximg
Either tweak this fit manually starting from fullrun_pn_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src82.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:00:36 2013] Warning, spatial fit 82 centroid is now closest to src. 118
[Mon Jun 17 01:00:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:00:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:00:36 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:00:36 2013] Source does appear to be extended
[Mon Jun 17 01:00:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:02:29 2013] XMMSAS src. selection expression = ellipse(37595.296000, 18757.360000, 1466.214042, 1466.214042, 0.000000, X, Y)
[Mon Jun 17 01:02:29 2013] Not overwriting source region fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src.reg
[Mon Jun 17 01:02:29 2013] Extracting stamp from image fullrun_pn_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (348, 132) - (517, 300)
[Mon Jun 17 01:02:29 2013] XMMSAS bgd. selection expression = annulus(37595.296000, 18757.360000, 2443.690070, 4887.380141, X, Y) && !ellipse(31961.690796, 14134.483307, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32484.336000, 13302.234000, 1437.488041, 1437.488041, 0.000000, X, Y) && !ellipse(32947.690000, 12922.574000, 3035.824087, 3035.824087, 0.000000, X, Y) && !ellipse(38500.332336, 19074.146729, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38280.538391, 18483.704056, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(38214.210449, 17869.335587, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37308.460480, 17485.825897, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(37814.463928, 16959.045517, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32763.488000, 13450.610000, 1992.456057, 1992.456057, 0.000000, X, Y)
[Mon Jun 17 01:02:29 2013] Writing fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106.gif
[Mon Jun 17 01:02:42 2013] ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src.evt and ../../xmm0082540701/products/events/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_bgd.evt exist, delete to re-create
[Mon Jun 17 01:02:42 2013] Mean detx,y = (12639.95, 2273.25) 
[Mon Jun 17 01:02:42 2013] ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src.img and ../../xmm0082540701/products/images/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_bgd.img exist, delete to re-create
[Mon Jun 17 01:02:42 2013] ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_bgd.pi exist, delete to re-create
[Mon Jun 17 01:02:42 2013] Setting source spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src_b10.pi.gz
[Mon Jun 17 01:02:42 2013] Setting bgd. spectrum file to fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_bgd.pi.gz
[Mon Jun 17 01:02:42 2013] ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_bgd.lc exist, delete to re-create
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106.rmf exists, delete to re-create
[Mon Jun 17 01:03:21 2013] fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106.arf exists, delete to re-create
[Tue Jun 18 10:27:46 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:27:46 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_src_b10.pi.gz = 2557.00
[Tue Jun 18 10:27:46 2013] Total counts from fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_bgd.pi.gz = 14030.00
[Tue Jun 18 10:27:46 2013] Got source and background scale factors 6080908.000000, 30458630.000000
[Tue Jun 18 10:27:46 2013] User source parameters:
  Position = (432.7, 216.2) = 20 47 7.71 30 6 56.7
  Extent = 24.4 (24.3-24.5)", rotation angle = 0
  Source aperture counts = -244.0 +/- 51.6
  Background aperture counts = 2801.0
  Rate = -0.07 +/- 0.02

[Tue Jun 18 10:28:00 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:00 2013] Using photon index=1.80, rate=0.074, arf fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106.arf
[Tue Jun 18 10:28:00 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:00 2013] Updating source flux to 4.7e-13
[Tue Jun 18 10:30:31 2013] Flag c found in src. 106 procflags, skipping spectral fitting
[Tue Jun 18 10:30:59 2013] xmm0082540701/analysis//spectral/fullrun_pn_xmm0082540701_pi300-10000_pass1_cl_src106_pl.csv not found, spectral fit skipped or did not complete