[Mon Jun 17 00:55:09 2013] Detection parameters:
  Position = (323.0, 172.9) = 20 47 44.47 30 3 47.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 97.2 +/- 22.5
  Background counts = 190.8
  Rate = 0.01 +/- 0.003

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 9.28'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 11.07 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 11.07"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.5, npix_max = 37, mask sum = 36, frac = 0.971
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 63 for pass 0, mean size = 11.07"
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src63.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src63.csv
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src63_1.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src63.csv
[Mon Jun 17 00:56:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src63_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src63.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src63.ximg exists
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src63_1.ximg exists
[Mon Jun 17 00:56:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src63 appears to have run properly
[Mon Jun 17 00:58:48 2013] Spatial fit model total counts = 4755.950000, observed total counts = 4759.000000
[Mon Jun 17 00:58:48 2013] Offset between fit and detection position for source 99 = 1.290858 pixels
[Mon Jun 17 00:58:48 2013] Warning, changing simple spatial fit ID from 63 to 8
[Mon Jun 17 00:58:48 2013] 4820.200000 total counts/ 4820.200000 bgd. counts: snr = 0.000000
Spatial fit parameters:
  Offset between fit and detection position for source 99 = 1.290858 pixels
  Position = (324.0, 172.0) = 20 47 44.16 30 3 45.1
  Extent = 2.7" x 2.7", rotation angle = 0
  Source counts = 0.0 +/- 69.4
  Background counts = 4820.2
  Rate = 3e-15 +/- 0.005
  Deleting source due to low Poisson probability