[Mon Jun 17 00:55:08 2013] Detection parameters:
  Position = (315.4, 230.1) = 20 47 47.03 30 8 0.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 177.6 +/- 31.0
  Background counts = 430.9
  Rate = 0.02 +/- 0.003

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 5.10'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 46 for pass 0, mean size = 8.98"
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src46.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src46.csv
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src46_1.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src46.csv
[Mon Jun 17 00:56:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src46.ximg exists
[Mon Jun 17 00:56:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src46.csv
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src46_1.ximg exists
[Mon Jun 17 00:56:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src46.csv
[Mon Jun 17 00:56:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src46_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src46.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:49 2013] Warning, spatial fit 46 centroid is now closest to src. 20
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 20
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 8.98 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 8.98"
[Mon Jun 17 00:59:53 2013] source mask rpix=2.1, npix_max = 26, mask sum = 25, frac = 0.950
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 37 for pass 1, mean size = 8.98"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src37.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src37.csv
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src37_1.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src37.csv
[Mon Jun 17 00:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src37.ximg exists
[Mon Jun 17 00:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src37_1.ximg exists
[Mon Jun 17 00:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src37.csv
[Mon Jun 17 00:59:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src37_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src37.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 6267.600000, observed total counts = 5360.000000
[Mon Jun 17 01:01:36 2013] Poor agreement between spatial fit and data for source 97
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:28 2013] XMMSAS src. selection expression = ellipse(27390.662262, 19970.541702, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 06:01:28 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97_src.reg
[Mon Jun 17 06:01:28 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (278, 193) - (353, 268)
[Mon Jun 17 06:01:28 2013] XMMSAS bgd. selection expression = annulus(27390.662262, 19970.541702, 1087.500000, 2175.000000, X, Y) && !ellipse(29662.682343, 18234.726028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.500000, 16360.164000, 3522.688101, 3522.688101, 0.000000, X, Y) && !ellipse(25829.826294, 22220.231659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27961.094000, 16826.262000, 3264.008094, 3264.008094, 0.000000, X, Y) && !ellipse(30253.670624, 17241.753036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26677.009800, 21938.740000, 1536.192044, 1536.192044, 0.000000, X, Y) && !ellipse(26113.051600, 21309.020000, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(24513.362000, 23331.984000, 1223.408035, 1223.408035, 0.000000, X, Y) && !ellipse(26741.414673, 21437.016602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.192000, 24015.696000, 2446.816070, 2446.816070, 0.000000, X, Y)
[Mon Jun 17 06:01:28 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97.gif
[Mon Jun 17 07:10:07 2013] Mean detx,y = (-2956.18, -6068.25) 
[Mon Jun 17 07:10:10 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 07:10:26 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 07:10:26 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97_src_b10.pi.gz
[Mon Jun 17 07:10:26 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97_bgd.pi.gz
[Mon Jun 17 08:59:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 08:59:03 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:46 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:46 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97_src_b10.pi.gz = 3461.00
[Tue Jun 18 10:28:46 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97_bgd.pi.gz = 6695.00
[Tue Jun 18 10:28:46 2013] Got source and background scale factors 1207934.000000, 2884524.000000
[Tue Jun 18 10:28:46 2013] User source parameters:
  Position = (315.4, 230.1) = 20 47 47.03 30 8 0.6
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 657.4 +/- 59.8
  Background aperture counts = 2803.6
  Rate = 0.05 +/- 0.004

[Tue Jun 18 10:28:46 2013] Updating counts from extracted products
[Tue Jun 18 10:28:46 2013] Set source signif. to 657.38/52.95 = 12.42
[Tue Jun 18 10:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:56 2013] Using photon index=1.80, rate=0.0481, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97.arf
[Tue Jun 18 10:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:56 2013] Updating source flux to 7.2e-13
[Tue Jun 18 10:29:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src97_pl.csv not found, spectral fit skipped or did not complete