[Mon Jun 17 00:55:08 2013] Detection parameters:
  Position = (301.8, 236.1) = 20 47 51.58 30 8 24.6
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 162.1 +/- 28.9
  Background counts = 376.8
  Rate = 0.01 +/- 0.003

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 4.53'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 8.69 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 8.69"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.0, npix_max = 24, mask sum = 24, frac = 0.962
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 51 for pass 0, mean size = 8.69"
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src51.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src51.csv
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src51_1.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src51.csv
[Mon Jun 17 00:56:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src51.ximg exists
[Mon Jun 17 00:56:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg exists
[Mon Jun 17 00:56:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src51.csv
[Mon Jun 17 00:56:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src51_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src51.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:49 2013] Warning, spatial fit 51 centroid is now closest to src. 20
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 4843.380000, observed total counts = 4660.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 96 = 0.438322 pixels
[Mon Jun 17 00:58:49 2013] Warning, changing simple spatial fit ID from 51 to 52
[Mon Jun 17 00:58:49 2013] 4813.829600 total counts/ 4788.120000 bgd. counts: snr = 0.371546
Spatial fit parameters:
  Offset between fit and detection position for source 96 = 0.438322 pixels
  Position = (301.7, 236.5) = 20 47 51.62 30 8 25.8
  Extent = 2.1" x 2.1", rotation angle = 0
  Source counts = 25.7 +/- 69.4
  Background counts = 4788.1
  Rate = 0.002 +/- 0.005
  Deleting source due to low Poisson probability