[Mon Jun 17 00:54:59 2013] Detection parameters:
  Position = (286.6, 341.0) = 20 47 56.69 30 15 59.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 248.4 +/- 31.0
  Background counts = 284.2
  Rate = 0.02 +/- 0.003

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 3.20'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 8.03 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 8.03"
[Mon Jun 17 00:56:50 2013] source mask rpix=1.8, npix_max = 22, mask sum = 20, frac = 0.909
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 8.03"
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src33.csv
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src33.csv
[Mon Jun 17 00:56:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jun 17 00:56:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33 appears to have run properly
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 4603.420000, observed total counts = 4610.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 9 = 3.381459 pixels
[Mon Jun 17 00:58:49 2013] 4524.954000 total counts/ 4184.050000 bgd. counts: snr = 5.270280
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 3.381459 pixels
  Position = (288.8, 338.4) = 20 47 55.96 30 15 48.9
  Extent = 16.1 (16.0-32.1)", rotation angle = 0
  Source counts = 340.9 +/- 67.3
  Background counts = 4184.1
  Rate = 0.02 +/- 0.005
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 3984.910000, observed total counts = 3975.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 9 = 2.050459 pixels
[Mon Jun 17 00:58:49 2013] Warning, changing simple spatial fit ID from 33 to 57
[Mon Jun 17 00:58:49 2013] 3909.958000 total counts/ 3788.620000 bgd. counts: snr = 1.971316
Spatial fit parameters:
  Offset between fit and detection position for source 9 = 2.050459 pixels
  Position = (290.5, 339.5) = 20 47 55.38 30 15 53.8
  Extent = 16.3 (16.2-32.6)", rotation angle = 0
  Source counts = 121.3 +/- 62.5
  Background counts = 3788.6
  Rate = 0.009 +/- 0.005
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 7
[Mon Jun 17 00:58:49 2013] Source is confused with source 72
[Mon Jun 17 00:58:49 2013] Source is confused with source 75
[Mon Jun 17 00:59:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 16.29"
[Mon Jun 17 00:59:53 2013] source mask rpix=3.7, npix_max = 72, mask sum = 81, frac = 1.124
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 26 for pass 1, mean size = 16.29"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src26.ximg exists
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src26_1.ximg exists
[Mon Jun 17 00:59:54 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src26 appears to have run properly
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src26.ximg exists
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src26_1.ximg exists
[Mon Jun 17 00:59:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src26 appears to have run properly
[Mon Jun 17 01:01:36 2013] Warning, spatial fit 26 centroid is now closest to src. 72
[Mon Jun 17 01:01:36 2013] Source 9 is offset by -3.232690 and -0.381241 pixels which is larger than
2 X fitted extent = 1.829306 x 1.829306, not incorporating fit results
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:27 2013] XMMSAS src. selection expression = ellipse(25225.974000, 29488.974000, 977.286028, 977.286028, 0.000000, X, Y)
[Mon Jun 17 06:01:27 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9_src.reg
[Mon Jun 17 06:01:27 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (234, 283) - (347, 396)
[Mon Jun 17 06:01:27 2013] XMMSAS bgd. selection expression = annulus(25225.974000, 29488.974000, 1628.810047, 3257.620094, X, Y) && !ellipse(28604.491211, 31846.536865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24203.440000, 30590.988000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(25006.108000, 29917.774000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(27590.806335, 30561.120361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.785309, 32501.442322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23652.825552, 30922.847485, 3302.720095, 1656.422776, 222.199959, X, Y) && !ellipse(29371.478729, 28986.772949, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28256.831055, 31439.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25250.193200, 28419.257800, 763.880822, 763.880822, 0.000000, X, Y) && !ellipse(26985.859200, 31321.557200, 860.368025, 860.368025, 0.000000, X, Y) && !ellipse(25901.238617, 30032.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.578278, 28753.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.714355, 30727.213684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.051361, 31006.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.192000, 24015.696000, 2446.816070, 2446.816070, 0.000000, X, Y) && !ellipse(26279.147522, 29186.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23470.015015, 25618.523132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.626800, 25042.243400, 2397.104069, 1511.232043, 58.149000, X, Y) && !ellipse(28011.380000, 32294.502400, 1441.296041, 1441.296041, 0.000000, X, Y)
[Mon Jun 17 06:01:27 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9.gif
[Mon Jun 17 06:55:41 2013] Mean detx,y = (3495.04, 1161.22) 
[Mon Jun 17 06:55:44 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:55:59 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:55:59 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9_src_b10.pi.gz
[Mon Jun 17 06:55:59 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9_bgd.pi.gz
[Tue Jun 18 10:28:42 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:43 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9_src_b10.pi.gz = 7239.00
[Tue Jun 18 10:28:43 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9_bgd.pi.gz = 15967.00
[Tue Jun 18 10:28:43 2013] Got source and background scale factors 3006400.000000, 8654296.000000
[Tue Jun 18 10:28:43 2013] User source parameters:
  Position = (290.5, 339.5) = 20 47 55.38 30 15 53.8
  Extent = 16.3 (16.2-32.6)", rotation angle = 0
  Source aperture counts = 1692.3 +/- 86.1
  Background aperture counts = 5546.7
  Rate = 0.1 +/- 0.006

[Tue Jun 18 10:28:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:55 2013] Using photon index=1.80, rate=0.00888, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9.arf
[Tue Jun 18 10:28:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:55 2013] Updating source flux to 1.1e-13
[Tue Jun 18 10:29:55 2013] Flag b found in src. 9 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] Flag c found in src. 9 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src9_pl.csv not found, spectral fit skipped or did not complete