[Mon Jun 17 00:55:07 2013] Detection parameters:
  Position = (265.1, 308.0) = 20 48 3.90 30 13 37.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 115.6 +/- 25.8
  Background counts = 256.4
  Rate = 0.01 +/- 0.002

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 2.51'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 7.68 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 7.68"
[Mon Jun 17 00:56:50 2013] source mask rpix=1.8, npix_max = 20, mask sum = 16, frac = 0.779
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 75 for pass 0, mean size = 7.68"
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src75.ximg exists
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src75_1.ximg exists
[Mon Jun 17 00:56:53 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src75 appears to have run properly
[Mon Jun 17 00:56:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src75.ximg exists
[Mon Jun 17 00:56:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src75_1.ximg exists
[Mon Jun 17 00:56:57 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src75 appears to have run properly
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 2994.900000, observed total counts = 2988.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 79 = 3.687621 pixels
[Mon Jun 17 00:58:49 2013] 3036.245000 total counts/ 2719.560000 bgd. counts: snr = 6.072649
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 3.687621 pixels
  Position = (265.0, 304.3) = 20 48 3.94 30 13 20.5
  Extent = 15.4 (15.3-15.4)", rotation angle = 0
  Source counts = 316.7 +/- 55.1
  Background counts = 2719.6
  Rate = 0.02 +/- 0.004
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 3355.710000, observed total counts = 3353.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 79 = 1.383015 pixels
[Mon Jun 17 00:58:49 2013] Warning, changing simple spatial fit ID from 75 to 78
[Mon Jun 17 00:58:49 2013] 3365.012000 total counts/ 3130.190000 bgd. counts: snr = 4.197140
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 1.383015 pixels
  Position = (264.6, 305.6) = 20 48 4.08 30 13 26.3
  Extent = 13.9 (11.4-15.1)", rotation angle = 0
  Source counts = 234.8 +/- 58.0
  Background counts = 3130.2
  Rate = 0.02 +/- 0.004
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 13.88"
[Mon Jun 17 00:59:53 2013] source mask rpix=3.2, npix_max = 54, mask sum = 49, frac = 0.899
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 60 for pass 1, mean size = 13.88"
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src60.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src60.csv
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src60_1.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src60.csv
[Mon Jun 17 00:59:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src60_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src60.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src60.ximg exists
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src60_1.ximg exists
[Mon Jun 17 00:59:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src60 appears to have run properly
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 3725.520000, observed total counts = 3715.000000
[Mon Jun 17 01:01:36 2013] Offset between fit and detection position for source 79 = 3.547568 pixels
[Mon Jun 17 01:01:36 2013] Warning, changing simple spatial fit ID from 60 to 56
[Mon Jun 17 01:01:36 2013] 3717.431800 total counts/ 3666.810000 bgd. counts: snr = 0.835975
Spatial fit parameters:
  Offset between fit and detection position for source 79 = 3.547568 pixels
  Position = (266.8, 302.9) = 20 48 3.32 30 13 14.3
  Extent = 7.2 (1.9-14.9)", rotation angle = 0
  Source counts = 50.6 +/- 61.0
  Background counts = 3666.8
  Rate = 0.004 +/- 0.004
  Deleting source due to low Poisson probability