[Mon Jun 17 00:54:59 2013] Detection parameters:
  Position = (286.7, 347.9) = 20 47 56.66 30 16 30.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 281.2 +/- 32.1
  Background counts = 259.1
  Rate = 0.02 +/- 0.003

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 3.69'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jun 17 00:56:50 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.867
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 27 for pass 0, mean size = 8.27"
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src27.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src27.csv
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src27_1.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src27.csv
[Mon Jun 17 00:56:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src27_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src27.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src27.ximg exists
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src27_1.ximg exists
[Mon Jun 17 00:56:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src27 appears to have run properly
[Mon Jun 17 00:58:49 2013] Warning, spatial fit 27 centroid is now closest to src. 4
[Mon Jun 17 00:58:49 2013] Warning: source 40 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 7 at 10.259996 pixels away
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 4
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 8.27 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 8.27"
[Mon Jun 17 00:59:53 2013] source mask rpix=1.9, npix_max = 23, mask sum = 20, frac = 0.867
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 21 for pass 1, mean size = 8.27"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src21.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src21.csv
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src21_1.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src21.csv
[Mon Jun 17 00:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src21_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src21.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src21.ximg exists
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src21_1.ximg exists
[Mon Jun 17 00:59:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src21 appears to have run properly
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 4201.010000, observed total counts = 4201.000000
[Mon Jun 17 01:01:36 2013] Offset between fit and detection position for source 7 = 3.701884 pixels
[Mon Jun 17 01:01:36 2013] 4167.673000 total counts/ 3775.500000 bgd. counts: snr = 6.382495
Spatial fit parameters:
  Offset between fit and detection position for source 7 = 3.701884 pixels
  Position = (288.0, 344.4) = 20 47 56.23 30 16 15.2
  Extent = 16.5 (16.5-33.1)", rotation angle = 0
  Source counts = 392.2 +/- 64.6
  Background counts = 3775.5
  Rate = 0.03 +/- 0.005
[Mon Jun 17 01:01:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:36 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:36 2013] Source does appear to be extended
[Mon Jun 17 01:01:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:26 2013] XMMSAS src. selection expression = ellipse(25006.108000, 29917.774000, 992.616029, 992.616029, 0.000000, X, Y)
[Mon Jun 17 06:01:26 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7_src.reg
[Mon Jun 17 06:01:26 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (231, 287) - (345, 401)
[Mon Jun 17 06:01:26 2013] XMMSAS bgd. selection expression = annulus(25006.108000, 29917.774000, 1654.360048, 3308.720095, X, Y) && !ellipse(28604.491211, 31846.536865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24203.440000, 30590.988000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(25225.974000, 29488.974000, 1303.048037, 1303.048037, 0.000000, X, Y) && !ellipse(27590.806335, 30561.120361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.785309, 32501.442322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23652.825552, 30922.847485, 3302.720095, 1656.422776, 222.199959, X, Y) && !ellipse(29371.478729, 28986.772949, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28256.831055, 31439.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25250.193200, 28419.257800, 763.880822, 763.880822, 0.000000, X, Y) && !ellipse(26985.859200, 31321.557200, 860.368025, 860.368025, 0.000000, X, Y) && !ellipse(25901.238617, 30032.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.578278, 28753.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.714355, 30727.213684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.051361, 31006.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.147522, 29186.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.626800, 25042.243400, 2397.104069, 1511.232043, 58.149000, X, Y) && !ellipse(28011.380000, 32294.502400, 1441.296041, 1441.296041, 0.000000, X, Y)
[Mon Jun 17 06:01:26 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7.gif
[Mon Jun 17 06:36:00 2013] Mean detx,y = (3871.49, 1416.27) 
[Mon Jun 17 06:36:02 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:36:15 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:36:16 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7_src_b10.pi.gz
[Mon Jun 17 06:36:16 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7_bgd.pi.gz
[Tue Jun 18 10:28:41 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:41 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7_src_b10.pi.gz = 6975.00
[Tue Jun 18 10:28:41 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7_bgd.pi.gz = 13266.00
[Tue Jun 18 10:28:41 2013] Got source and background scale factors 3100800.000000, 7375896.000000
[Tue Jun 18 10:28:41 2013] User source parameters:
  Position = (288.0, 344.4) = 20 47 56.23 30 16 15.2
  Extent = 16.5 (16.5-33.1)", rotation angle = 0
  Source aperture counts = 1398.0 +/- 84.5
  Background aperture counts = 5577.0
  Rate = 0.1 +/- 0.006

[Tue Jun 18 10:28:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:55 2013] Using photon index=1.80, rate=0.0287, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7.arf
[Tue Jun 18 10:28:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:55 2013] Updating source flux to 4e-13
[Tue Jun 18 10:29:55 2013] Flag c found in src. 7 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src7_pl.csv not found, spectral fit skipped or did not complete