[Mon Jun 17 00:55:05 2013] Detection parameters:
  Position = (267.7, 357.0) = 20 48 3.05 30 17 11.5
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 133.8 +/- 23.4
  Background counts = 190.6
  Rate = 0.01 +/- 0.002

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 4.79'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 8.82"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.977
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 61 for pass 0, mean size = 8.82"
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src61.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src61.csv
[Mon Jun 17 00:56:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src61_1.ximg exists
[Mon Jun 17 00:56:53 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src61.csv
[Mon Jun 17 00:56:53 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src61.ximg exists
[Mon Jun 17 00:56:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src61.csv
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src61_1.ximg exists
[Mon Jun 17 00:56:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src61.csv
[Mon Jun 17 00:56:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src61_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src61.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:49 2013] Warning, spatial fit 61 centroid is now closest to src. 71
[Mon Jun 17 00:58:49 2013] Source 69 is offset by -7.820490 and 0.384071 pixels which is larger than
2 X fitted extent = 1.188943 x 1.188943, not incorporating fit results
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 71
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 8.82 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 8.82"
[Mon Jun 17 00:59:53 2013] source mask rpix=2.0, npix_max = 25, mask sum = 25, frac = 0.977
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 49 for pass 1, mean size = 8.82"
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src49.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src49.csv
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src49_1.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src49.csv
[Mon Jun 17 00:59:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src49.ximg exists
[Mon Jun 17 00:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src49_1.ximg exists
[Mon Jun 17 00:59:56 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src49.csv
[Mon Jun 17 00:59:56 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src49_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src49.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:36 2013] Source 69 is offset by -6.014398 and 3.647680 pixels which is larger than
2 X fitted extent = 1.014368 x 1.014368, not incorporating fit results
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:29 2013] XMMSAS src. selection expression = ellipse(23239.051361, 31006.196198, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 06:01:29 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69_src.reg
[Mon Jun 17 06:01:29 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (230, 319) - (305, 394)
[Mon Jun 17 06:01:29 2013] XMMSAS bgd. selection expression = annulus(23239.051361, 31006.196198, 1087.500000, 2175.000000, X, Y) && !ellipse(24203.440000, 30590.988000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(25006.108000, 29917.774000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(25225.974000, 29488.974000, 1303.048037, 1303.048037, 0.000000, X, Y) && !ellipse(24012.785309, 32501.442322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23652.825552, 30922.847485, 3302.720095, 1656.422776, 222.199959, X, Y) && !ellipse(25250.193200, 28419.257800, 763.880822, 763.880822, 0.000000, X, Y) && !ellipse(25901.238617, 30032.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.578278, 28753.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.714355, 30727.213684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.147522, 29186.590454, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 06:01:29 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69.gif
[Mon Jun 17 07:16:06 2013] Mean detx,y = (5919.01, 1539.31) 
[Mon Jun 17 07:16:12 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 07:16:22 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 07:16:22 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69_src_b10.pi.gz
[Mon Jun 17 07:16:22 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69_bgd.pi.gz
[Mon Jun 17 09:37:52 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 09:37:52 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:50 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:50 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69_src_b10.pi.gz = 1992.00
[Tue Jun 18 10:28:50 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69_bgd.pi.gz = 1290.00
[Tue Jun 18 10:28:50 2013] Got source and background scale factors 1298212.000000, 1521388.000000
[Tue Jun 18 10:28:50 2013] User source parameters:
  Position = (267.7, 357.0) = 20 48 3.05 30 17 11.5
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 891.2 +/- 45.6
  Background aperture counts = 1100.8
  Rate = 0.07 +/- 0.003

[Tue Jun 18 10:28:50 2013] Updating counts from extracted products
[Tue Jun 18 10:28:50 2013] Set source signif. to 891.23/33.18 = 26.86
[Tue Jun 18 10:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:57 2013] Using photon index=1.80, rate=0.0652, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69.arf
[Tue Jun 18 10:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:57 2013] Updating source flux to 1.1e-12
[Tue Jun 18 10:29:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src69_pl.csv not found, spectral fit skipped or did not complete