[Mon Jun 17 00:54:59 2013] Detection parameters:
  Position = (378.2, 124.1) = 20 47 26.00 30 0 16.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 109.9 +/- 19.7
  Background counts = 75.9
  Rate = 0.008 +/- 0.001

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 13.90'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 13.38 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 13.38"
[Mon Jun 17 00:56:50 2013] source mask rpix=3.1, npix_max = 51, mask sum = 49, frac = 0.958
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 88 for pass 0, mean size = 13.38"
[Mon Jun 17 00:56:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src88.ximg exists
[Mon Jun 17 00:56:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src88.csv
[Mon Jun 17 00:56:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src88_1.ximg exists
[Mon Jun 17 00:56:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src88.csv
[Mon Jun 17 00:56:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src88_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src88.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src88.ximg exists
[Mon Jun 17 00:56:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src88_1.ximg exists
[Mon Jun 17 00:56:57 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src88 appears to have run properly
[Mon Jun 17 00:58:49 2013] Source 6 is offset by -7.792454 and -5.172145 pixels which is larger than
2 X fitted extent = 1.543913 x 1.543913, not incorporating fit results
[Mon Jun 17 00:58:49 2013] Warning, spatial fit 88 centroid is now closest to src. 100
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 1959.290000, observed total counts = 1949.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 6 = 5.534039 pixels
[Mon Jun 17 00:58:49 2013] Warning, changing simple spatial fit ID from 88 to 90
[Mon Jun 17 00:58:49 2013] 1972.422000 total counts/ 1443.210000 bgd. counts: snr = 13.930443
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 5.534039 pixels
  Position = (373.0, 122.2) = 20 47 27.74 30 0 8.1
  Extent = 26.1 (26.0-52.1)", rotation angle = 0
  Source counts = 529.2 +/- 44.4
  Background counts = 1443.2
  Rate = 0.04 +/- 0.003
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 17
[Mon Jun 17 00:58:49 2013] Source is confused with source 100
[Mon Jun 17 00:59:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 26.06"
[Mon Jun 17 00:59:53 2013] source mask rpix=6.0, npix_max = 168, mask sum = 159, frac = 0.944
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 70 for pass 1, mean size = 26.06"
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src70.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src70.csv
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src70_1.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src70.csv
[Mon Jun 17 00:59:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src70.ximg exists
[Mon Jun 17 00:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Jun 17 00:59:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src70_1.ximg exists
[Mon Jun 17 00:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src70.csv
[Mon Jun 17 00:59:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src70_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src70.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:36 2013] Source 6 is offset by -8.740795 and 0.930575 pixels which is larger than
2 X fitted extent = 2.972253 x 2.972253, not incorporating fit results
[Mon Jun 17 01:01:36 2013] Warning, spatial fit 70 centroid is now closest to src. 48
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 3615.110000, observed total counts = 3610.000000
[Mon Jun 17 01:01:36 2013] Offset between fit and detection position for source 6 = 0.847913 pixels
[Mon Jun 17 01:01:36 2013] Warning, changing simple spatial fit ID from 70 to 72
[Mon Jun 17 01:01:36 2013] 3639.583000 total counts/ 3218.660000 bgd. counts: snr = 7.419337
Spatial fit parameters:
  Offset between fit and detection position for source 6 = 0.847913 pixels
  Position = (373.2, 123.0) = 20 47 27.68 30 0 11.7
  Extent = 26.1 (23.0-52.1)" x 12.7 (9.5-17.7)", rotation angle = 356 (348-0) degrees
  Source counts = 420.9 +/- 60.3
  Background counts = 3218.7
  Rate = 0.03 +/- 0.004
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using errors on major and minor axis (from spatial fitting), asym = 1.30
[Mon Jun 17 06:01:29 2013] XMMSAS src. selection expression = ellipse(32421.505600, 10650.842000, 1563.570045, 760.350022, 356.043000, X, Y)
[Mon Jun 17 06:01:29 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6_src.reg
[Mon Jun 17 06:01:29 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (283, 33) - (463, 213)
[Mon Jun 17 06:01:29 2013] XMMSAS bgd. selection expression = annulus(32421.505600, 10650.842000, 2605.950075, 5211.900150, X, Y) && !ellipse(31308.870000, 14406.744000, 1928.984056, 1928.984056, 0.000000, X, Y) && !ellipse(30826.424164, 15086.616638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31090.774811, 15604.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29261.298000, 15847.757600, 1761.344051, 1761.344051, 0.000000, X, Y) && !ellipse(30246.279022, 14485.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.468536, 14474.575302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.400177, 14484.710876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29843.490000, 13389.146000, 1930.600056, 1038.424030, 49.554300, X, Y) && !ellipse(30479.796814, 15606.090378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.181915, 15533.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.614136, 11693.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.500000, 16360.164000, 3522.688101, 3522.688101, 0.000000, X, Y) && !ellipse(29959.989868, 15695.130768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29778.903595, 13965.356613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32164.973114, 12994.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.674200, 13667.098000, 4016.048116, 4016.048116, 0.000000, X, Y) && !ellipse(32361.670000, 13680.458000, 1862.848054, 1862.848054, 0.000000, X, Y) && !ellipse(27961.094000, 16826.262000, 3264.008094, 3264.008094, 0.000000, X, Y) && !ellipse(33141.009674, 12490.373672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.492000, 12686.204000, 2008.024058, 2008.024058, 0.000000, X, Y) && !ellipse(32613.460663, 12567.941681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30483.708306, 12752.511636, 1930.600056, 1044.960960, 50.596997, X, Y) && !ellipse(30247.826904, 13097.451431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32856.018829, 14045.437607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31117.670000, 12469.846000, 2068.688060, 2068.688060, 0.000000, X, Y) && !ellipse(28222.984741, 15543.792770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32596.038361, 12154.286789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33910.673462, 13240.926559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39150.630800, 16045.732800, 2126.256061, 2126.256061, 0.000000, X, Y) && !ellipse(32506.616000, 10450.312000, 2140.632062, 2140.632062, 0.000000, X, Y)
[Mon Jun 17 06:01:29 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6.gif
[Mon Jun 17 07:36:28 2013] Mean detx,y = (-11708.72, -11849.09) 
[Mon Jun 17 07:36:31 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 07:37:18 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 07:37:19 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6_src_b10.pi.gz
[Mon Jun 17 07:37:19 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6_bgd.pi.gz
[Tue Jun 18 10:28:54 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:54 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6_src_b10.pi.gz = 1683.00
[Tue Jun 18 10:28:54 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6_bgd.pi.gz = 1518.00
[Tue Jun 18 10:28:54 2013] Got source and background scale factors 3240709.000000, 4560339.000000
[Tue Jun 18 10:28:54 2013] User source parameters:
  Position = (373.2, 123.0) = 20 47 27.68 30 0 11.7
  Extent = 26.1 (23.0-52.1)" x 12.7 (9.5-17.7)", rotation angle = 356 (348-0) degrees
  Source aperture counts = 604.3 +/- 42.0
  Background aperture counts = 1078.7
  Rate = 0.04 +/- 0.003

[Tue Jun 18 10:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:57 2013] Using photon index=1.80, rate=0.0308, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6.arf
[Tue Jun 18 10:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:57 2013] Updating source flux to 8.9e-13
[Tue Jun 18 10:29:55 2013] Flag b found in src. 6 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] Flag c found in src. 6 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src6_pl.csv not found, spectral fit skipped or did not complete