[Mon Jun 17 00:55:04 2013] Detection parameters:
  Position = (354.9, 148.0) = 20 47 33.82 30 2 0.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 286.7 +/- 28.8
  Background counts = 118.4
  Rate = 0.02 +/- 0.002

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 11.65'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 12.25"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.818
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 34 for pass 0, mean size = 12.25"
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src34.ximg exists
[Mon Jun 17 00:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src34.csv
[Mon Jun 17 00:56:52 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src34_1.ximg exists
[Mon Jun 17 00:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src34.csv
[Mon Jun 17 00:56:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src34_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src34.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src34.ximg exists
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src34_1.ximg exists
[Mon Jun 17 00:56:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src34 appears to have run properly
[Mon Jun 17 00:58:48 2013] Source 56 is offset by 2.525445 and 1.299907 pixels which is larger than
2 X fitted extent = 1.355655 x 1.355655, not incorporating fit results
[Mon Jun 17 00:58:49 2013] Warning, spatial fit 34 centroid is now closest to src. 51
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 51
[Mon Jun 17 00:58:49 2013] Source is confused with source 54
[Mon Jun 17 00:58:49 2013] Source is confused with source 59
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 12.25 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 12.25"
[Mon Jun 17 00:59:53 2013] source mask rpix=2.8, npix_max = 44, mask sum = 36, frac = 0.818
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 27 for pass 1, mean size = 12.25"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src27.ximg exists
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src27_1.ximg exists
[Mon Jun 17 00:59:54 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src27 appears to have run properly
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27.ximg exists
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27_1.ximg exists
[Mon Jun 17 00:59:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src27 appears to have run properly
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 3151.390000, observed total counts = 3181.000000
[Mon Jun 17 01:01:36 2013] Offset between fit and detection position for source 56 = 4.008806 pixels
[Mon Jun 17 01:01:36 2013] 3192.797000 total counts/ 2855.550000 bgd. counts: snr = 6.311073
Spatial fit parameters:
  Offset between fit and detection position for source 56 = 4.008806 pixels
  Position = (350.9, 147.1) = 20 47 35.13 30 1 56.9
  Extent = 24.1" x 13.1", rotation angle = 51
  Source counts = 337.2 +/- 56.5
  Background counts = 2855.6
  Rate = 0.02 +/- 0.004
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 6402.100000, observed total counts = 3906.000000
[Mon Jun 17 01:01:36 2013] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using major and minor axis, asym = 1.85
[Mon Jun 17 01:01:37 2013] Source is asymmetric
[Mon Jun 17 06:01:27 2013] XMMSAS src. selection expression = ellipse(30483.708306, 12752.511636, 1447.950042, 783.720720, 50.596997, X, Y)
[Mon Jun 17 06:01:27 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56_src.reg
[Mon Jun 17 06:01:27 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (268, 64) - (434, 230)
[Mon Jun 17 06:01:27 2013] XMMSAS bgd. selection expression = annulus(30483.708306, 12752.511636, 2413.250069, 4826.500139, X, Y) && !ellipse(31308.870000, 14406.744000, 1928.984056, 1928.984056, 0.000000, X, Y) && !ellipse(30826.424164, 15086.616638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31090.774811, 15604.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29261.298000, 15847.757600, 1761.344051, 1761.344051, 0.000000, X, Y) && !ellipse(29662.682343, 18234.726028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30246.279022, 14485.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.468536, 14474.575302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.400177, 14484.710876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29843.490000, 13389.146000, 1930.600056, 1038.424030, 49.554300, X, Y) && !ellipse(30479.796814, 15606.090378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.181915, 15533.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.614136, 11693.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.500000, 16360.164000, 3522.688101, 3522.688101, 0.000000, X, Y) && !ellipse(29959.989868, 15695.130768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29778.903595, 13965.356613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32164.973114, 12994.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.674200, 13667.098000, 4016.048116, 4016.048116, 0.000000, X, Y) && !ellipse(32361.670000, 13680.458000, 1862.848054, 1862.848054, 0.000000, X, Y) && !ellipse(27961.094000, 16826.262000, 3264.008094, 3264.008094, 0.000000, X, Y) && !ellipse(33141.009674, 12490.373672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.492000, 12686.204000, 2008.024058, 2008.024058, 0.000000, X, Y) && !ellipse(32613.460663, 12567.941681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30247.826904, 13097.451431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.670624, 17241.753036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32856.018829, 14045.437607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31117.670000, 12469.846000, 2068.688060, 2068.688060, 0.000000, X, Y) && !ellipse(28222.984741, 15543.792770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32596.038361, 12154.286789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33910.673462, 13240.926559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.505600, 10650.842000, 2084.760060, 1013.800029, 356.043000, X, Y) && !ellipse(32506.616000, 10450.312000, 2140.632062, 2140.632062, 0.000000, X, Y)
[Mon Jun 17 06:01:27 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56.gif
[Mon Jun 17 06:56:07 2013] Mean detx,y = (-9171.47, -10714.11) 
[Mon Jun 17 06:56:09 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:56:35 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:56:36 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Jun 17 06:56:36 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Tue Jun 18 10:28:43 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:43 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 4556.00
[Tue Jun 18 10:28:43 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56_bgd.pi.gz = 3204.00
[Tue Jun 18 10:28:43 2013] Got source and background scale factors 3571200.000000, 9687884.000000
[Tue Jun 18 10:28:43 2013] User source parameters:
  Position = (350.9, 147.1) = 20 47 35.13 30 1 56.9
  Extent = 24.1" x 13.1", rotation angle = 51
  Source aperture counts = 3374.9 +/- 68.5
  Background aperture counts = 1181.1
  Rate = 0.2 +/- 0.005

[Tue Jun 18 10:28:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:55 2013] Using photon index=1.80, rate=0.0247, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56.arf
[Tue Jun 18 10:28:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:56 2013] Updating source flux to 5.9e-13
[Tue Jun 18 10:29:55 2013] Flag b found in src. 56 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] Flag p found in src. 56 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] Flag c found in src. 56 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete