[Mon Jun 17 00:55:03 2013] Detection parameters:
  Position = (358.2, 164.0) = 20 47 32.70 30 3 9.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 481.6 +/- 35.8
  Background counts = 181.0
  Rate = 0.07 +/- 0.005

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 10.66'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 11.76 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 11.76"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.7, npix_max = 41, mask sum = 36, frac = 0.877
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 3 for pass 0, mean size = 11.76"
[Mon Jun 17 00:56:50 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src3.ximg exists
[Mon Jun 17 00:56:50 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src3.csv
[Mon Jun 17 00:56:50 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src3_1.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: model total counts is not > 0 in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src3.csv
[Mon Jun 17 00:56:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src3_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src3.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src3.ximg exists
[Mon Jun 17 00:56:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src3_1.ximg exists
[Mon Jun 17 00:56:54 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src3 appears to have run properly
[Mon Jun 17 00:58:48 2013] Warning, spatial fit 3 centroid is now closest to src. 44
[Mon Jun 17 00:58:48 2013] Spatial fit model total counts = 4744.960000, observed total counts = 4749.000000
[Mon Jun 17 00:58:48 2013] Offset between fit and detection position for source 50 = 5.007446 pixels
[Mon Jun 17 00:58:48 2013] Warning, changing simple spatial fit ID from 3 to 15
[Mon Jun 17 00:58:48 2013] 4713.428000 total counts/ 4344.390000 bgd. counts: snr = 5.598951
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 5.007446 pixels
  Position = (360.3, 168.6) = 20 47 31.98 30 3 30.1
  Extent = 24.4 (24.4-24.4)", rotation angle = 0
  Source counts = 369.0 +/- 68.7
  Background counts = 4344.4
  Rate = 0.03 +/- 0.005
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 4859.910000, observed total counts = 4852.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 50 = 2.419153 pixels
[Mon Jun 17 00:58:49 2013] Warning, changing simple spatial fit ID from 15 to 22
[Mon Jun 17 00:58:49 2013] 4914.755000 total counts/ 4364.640000 bgd. counts: snr = 8.326822
Spatial fit parameters:
  Offset between fit and detection position for source 50 = 2.419153 pixels
  Position = (360.4, 166.2) = 20 47 31.95 30 3 19.6
  Extent = 24.1 (24.0-48.2)", rotation angle = 0
  Source counts = 550.1 +/- 70.1
  Background counts = 4364.6
  Rate = 0.04 +/- 0.005
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 35
[Mon Jun 17 00:58:49 2013] Source is confused with source 29
[Mon Jun 17 00:58:49 2013] Source is confused with source 41
[Mon Jun 17 00:58:49 2013] Source is confused with source 39
[Mon Jun 17 00:58:49 2013] Source is confused with source 49
[Mon Jun 17 00:59:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 24.11"
[Mon Jun 17 00:59:53 2013] source mask rpix=5.5, npix_max = 146, mask sum = 144, frac = 0.986
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 2 for pass 1, mean size = 24.11"
[Mon Jun 17 00:59:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src2.ximg exists
[Mon Jun 17 00:59:53 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src2_1.ximg exists
[Mon Jun 17 00:59:53 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src2 appears to have run properly
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src2.ximg exists
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src2_1.ximg exists
[Mon Jun 17 00:59:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src2 appears to have run properly
[Mon Jun 17 01:01:36 2013] Warning, spatial fit 2 centroid is now closest to src. 54
[Mon Jun 17 01:01:36 2013] Source 50 is offset by -3.843852 and 1.689609 pixels which is larger than
2 X fitted extent = 2.413310 x 2.413310, not incorporating fit results
[Mon Jun 17 01:01:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:36 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:36 2013] Source does appear to be extended
[Mon Jun 17 01:01:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:24 2013] XMMSAS src. selection expression = ellipse(31308.870000, 14406.744000, 1446.738042, 1446.738042, 0.000000, X, Y)
[Mon Jun 17 06:01:25 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50_src.reg
[Mon Jun 17 06:01:25 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (277, 83) - (444, 249)
[Mon Jun 17 06:01:25 2013] XMMSAS bgd. selection expression = annulus(31308.870000, 14406.744000, 2411.230069, 4822.460139, X, Y) && !ellipse(30826.424164, 15086.616638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31090.774811, 15604.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29261.298000, 15847.757600, 1761.344051, 1761.344051, 0.000000, X, Y) && !ellipse(29662.682343, 18234.726028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30246.279022, 14485.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.468536, 14474.575302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.400177, 14484.710876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29843.490000, 13389.146000, 1930.600056, 1038.424030, 49.554300, X, Y) && !ellipse(30479.796814, 15606.090378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.181915, 15533.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.614136, 11693.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28334.500000, 16360.164000, 3522.688101, 3522.688101, 0.000000, X, Y) && !ellipse(29959.989868, 15695.130768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29778.903595, 13965.356613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32164.973114, 12994.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.674200, 13667.098000, 4016.048116, 4016.048116, 0.000000, X, Y) && !ellipse(32361.670000, 13680.458000, 1862.848054, 1862.848054, 0.000000, X, Y) && !ellipse(27961.094000, 16826.262000, 3264.008094, 3264.008094, 0.000000, X, Y) && !ellipse(33141.009674, 12490.373672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.492000, 12686.204000, 2008.024058, 2008.024058, 0.000000, X, Y) && !ellipse(32613.460663, 12567.941681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30483.708306, 12752.511636, 1930.600056, 1044.960960, 50.596997, X, Y) && !ellipse(30247.826904, 13097.451431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.670624, 17241.753036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32856.018829, 14045.437607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31117.670000, 12469.846000, 2068.688060, 2068.688060, 0.000000, X, Y) && !ellipse(27390.662262, 19970.541702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.984741, 15543.792770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32596.038361, 12154.286789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33910.673462, 13240.926559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.505600, 10650.842000, 2084.760060, 1013.800029, 356.043000, X, Y) && !ellipse(32506.616000, 10450.312000, 2140.632062, 2140.632062, 0.000000, X, Y)
[Mon Jun 17 06:01:25 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50.gif
[Mon Jun 17 06:04:21 2013] Mean detx,y = (-9011.81, -9031.16) 
[Mon Jun 17 06:04:23 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:04:52 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:04:53 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50_src_b10.pi.gz
[Mon Jun 17 06:04:53 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50_bgd.pi.gz
[Tue Jun 18 10:28:36 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:36 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50_src_b10.pi.gz = 16507.00
[Tue Jun 18 10:28:36 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50_bgd.pi.gz = 9955.00
[Tue Jun 18 10:28:36 2013] Got source and background scale factors 6574400.000000, 10372299.000000
[Tue Jun 18 10:28:36 2013] User source parameters:
  Position = (360.4, 166.2) = 20 47 31.95 30 3 19.6
  Extent = 24.1 (24.0-48.2)", rotation angle = 0
  Source aperture counts = 10197.1 +/- 129.5
  Background aperture counts = 6309.9
  Rate = 0.7 +/- 0.009

[Tue Jun 18 10:28:54 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:54 2013] Using photon index=1.80, rate=0.0403, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50.arf
[Tue Jun 18 10:28:54 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:54 2013] Updating source flux to 7.7e-13
[Tue Jun 18 10:29:55 2013] Flag b found in src. 50 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] Flag c found in src. 50 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src50_pl.csv not found, spectral fit skipped or did not complete