[Mon Jun 17 00:55:01 2013] Detection parameters:
  Position = (448.3, 182.9) = 20 47 2.49 30 4 31.3
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 118.3 +/- 22.9
  Background counts = 135.6
  Rate = 0.009 +/- 0.002

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 13.72'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 13.29 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 13.29"
[Mon Jun 17 00:56:50 2013] source mask rpix=3.1, npix_max = 50, mask sum = 49, frac = 0.969
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 84 for pass 0, mean size = 13.29"
[Mon Jun 17 00:56:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src84.ximg exists
[Mon Jun 17 00:56:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src84.csv
[Mon Jun 17 00:56:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src84_1.ximg exists
[Mon Jun 17 00:56:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src84.csv
[Mon Jun 17 00:56:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src84_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src84.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src84.ximg exists
[Mon Jun 17 00:56:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src84_1.ximg exists
[Mon Jun 17 00:56:57 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src84 appears to have run properly
[Mon Jun 17 00:58:49 2013] Spatial fit model total counts = 2412.930000, observed total counts = 2414.000000
[Mon Jun 17 00:58:49 2013] Offset between fit and detection position for source 28 = 3.060758 pixels
[Mon Jun 17 00:58:49 2013] 2287.908000 total counts/ 1613.690000 bgd. counts: snr = 16.783800
Spatial fit parameters:
  Offset between fit and detection position for source 28 = 3.060758 pixels
  Position = (450.6, 185.0) = 20 47 1.74 30 4 41.0
  Extent = 26.6 (26.5-53.2)", rotation angle = 0
  Source counts = 674.2 +/- 47.8
  Background counts = 1613.7
  Rate = 0.05 +/- 0.004
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 27
[Mon Jun 17 00:58:49 2013] Source is confused with source 33
[Mon Jun 17 00:58:49 2013] Source is confused with source 38
[Mon Jun 17 00:59:53 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 26.58"
[Mon Jun 17 00:59:53 2013] source mask rpix=6.1, npix_max = 174, mask sum = 182, frac = 1.041
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 66 for pass 1, mean size = 26.58"
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src66.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src66.csv
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src66_1.ximg exists
[Mon Jun 17 00:59:55 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src66.csv
[Mon Jun 17 00:59:55 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src66.ximg exists
[Mon Jun 17 00:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src66.csv
[Mon Jun 17 00:59:57 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src66_1.ximg exists
[Mon Jun 17 00:59:57 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src66.csv
[Mon Jun 17 00:59:57 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src66_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src66.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:36 2013] Warning, spatial fit 66 centroid is now closest to src. 33
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:29 2013] XMMSAS src. selection expression = ellipse(39150.630800, 16045.732800, 1594.692046, 1594.692046, 0.000000, X, Y)
[Mon Jun 17 06:01:29 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28_src.reg
[Mon Jun 17 06:01:29 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (359, 93) - (542, 277)
[Mon Jun 17 06:01:29 2013] XMMSAS bgd. selection expression = annulus(39150.630800, 16045.732800, 2657.820076, 5315.640153, X, Y) && !ellipse(31626.674200, 13667.098000, 4016.048116, 4016.048116, 0.000000, X, Y) && !ellipse(32361.670000, 13680.458000, 1862.848054, 1862.848054, 0.000000, X, Y) && !ellipse(33141.009674, 12490.373672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.492000, 12686.204000, 2008.024058, 2008.024058, 0.000000, X, Y) && !ellipse(43884.399872, 21801.225555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33910.673462, 13240.926559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43491.989197, 20569.562775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.505600, 10650.842000, 2084.760060, 1013.800029, 356.043000, X, Y) && !ellipse(32506.616000, 10450.312000, 2140.632062, 2140.632062, 0.000000, X, Y)
[Mon Jun 17 06:01:29 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28.gif
[Mon Jun 17 07:35:27 2013] Mean detx,y = (-15160.46, -3925.16) 
[Mon Jun 17 07:35:29 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 07:36:17 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 07:36:17 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28_src_b10.pi.gz
[Mon Jun 17 07:36:17 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28_bgd.pi.gz
[Tue Jun 18 10:28:53 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:53 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28_src_b10.pi.gz = 6740.00
[Tue Jun 18 10:28:53 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28_bgd.pi.gz = 24090.00
[Tue Jun 18 10:28:54 2013] Got source and background scale factors 7850333.000000, 27998532.000000
[Tue Jun 18 10:28:54 2013] User source parameters:
  Position = (450.6, 185.0) = 20 47 1.74 30 4 41.0
  Extent = 26.6 (26.5-53.2)", rotation angle = 0
  Source aperture counts = -14.4 +/- 83.1
  Background aperture counts = 6754.4
  Rate = -0.001 +/- 0.006

[Tue Jun 18 10:28:57 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:57 2013] Using photon index=1.80, rate=0.0493, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28.arf
[Tue Jun 18 10:28:57 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:57 2013] Updating source flux to 1.2e-12
[Tue Jun 18 10:29:55 2013] Flag c found in src. 28 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src28_pl.csv not found, spectral fit skipped or did not complete