[Mon Jun 17 00:55:01 2013] Detection parameters:
  Position = (323.4, 192.7) = 20 47 44.36 30 5 22.1
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 289.2 +/- 31.8
  Background counts = 299.6
  Rate = 0.04 +/- 0.004

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 7.88'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.752
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.37"
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src17.csv
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src17.csv
[Mon Jun 17 00:56:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 17 00:56:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17 appears to have run properly
[Mon Jun 17 00:58:48 2013] Warning, spatial fit 17 centroid is now closest to src. 24
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 26
[Mon Jun 17 00:58:49 2013] Source is confused with source 24
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 10.37 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 10.37"
[Mon Jun 17 00:59:53 2013] source mask rpix=2.4, npix_max = 33, mask sum = 25, frac = 0.752
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 10.37"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src13.csv
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src13.csv
[Mon Jun 17 00:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jun 17 00:59:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13 appears to have run properly
[Mon Jun 17 01:01:36 2013] Spatial fit model total counts = 16738.600000, observed total counts = 16722.000000
[Mon Jun 17 01:01:36 2013] Offset between fit and detection position for source 25 = 4.963811 pixels
[Mon Jun 17 01:01:36 2013] Warning, changing simple spatial fit ID from 13 to 5
[Mon Jun 17 01:01:36 2013] 16926.010000 total counts/ 13244.800000 bgd. counts: snr = 31.986586
Spatial fit parameters:
  Offset between fit and detection position for source 25 = 4.963811 pixels
  Position = (326.2, 188.6) = 20 47 43.40 30 4 57.3
  Extent = 44.0 (44.0-88.1)", rotation angle = 0
  Source counts = 3681.2 +/- 130.1
  Background counts = 13244.8
  Rate = 0.3 +/- 0.01
[Mon Jun 17 01:01:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:36 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:36 2013] Source does appear to be extended
[Mon Jun 17 01:01:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:25 2013] Counts = 3681.210000, rescaling region sizes by 2.000000
[Mon Jun 17 06:01:25 2013] XMMSAS src. selection expression = ellipse(28334.500000, 16360.164000, 5284.032152, 5284.032152, 0.000000, X, Y)
[Mon Jun 17 06:01:25 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25_src.reg
[Mon Jun 17 06:01:25 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (23, 0) - (595, 492)
[Mon Jun 17 06:01:26 2013] XMMSAS bgd. selection expression = annulus(28334.500000, 16360.164000, 17613.440507, 35226.881014, X, Y) && !ellipse(28604.491211, 31846.536865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31308.870000, 14406.744000, 1928.984056, 1928.984056, 0.000000, X, Y) && !ellipse(30826.424164, 15086.616638, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31090.774811, 15604.565063, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29261.298000, 15847.757600, 1761.344051, 1761.344051, 0.000000, X, Y) && !ellipse(29662.682343, 18234.726028, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30246.279022, 14485.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.468536, 14474.575302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.400177, 14484.710876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29843.490000, 13389.146000, 1930.600056, 1038.424030, 49.554300, X, Y) && !ellipse(30479.796814, 15606.090378, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29467.181915, 15533.699677, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30589.614136, 11693.732132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29959.989868, 15695.130768, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29778.903595, 13965.356613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32164.973114, 12994.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25829.826294, 22220.231659, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.674200, 13667.098000, 4016.048116, 4016.048116, 0.000000, X, Y) && !ellipse(32361.670000, 13680.458000, 1862.848054, 1862.848054, 0.000000, X, Y) && !ellipse(24203.440000, 30590.988000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(25006.108000, 29917.774000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(27961.094000, 16826.262000, 3264.008094, 3264.008094, 0.000000, X, Y) && !ellipse(33141.009674, 12490.373672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.492000, 12686.204000, 2008.024058, 2008.024058, 0.000000, X, Y) && !ellipse(32613.460663, 12567.941681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25225.974000, 29488.974000, 1303.048037, 1303.048037, 0.000000, X, Y) && !ellipse(30483.708306, 12752.511636, 1930.600056, 1044.960960, 50.596997, X, Y) && !ellipse(30247.826904, 13097.451431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30253.670624, 17241.753036, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27590.806335, 30561.120361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24012.785309, 32501.442322, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(23652.825552, 30922.847485, 3302.720095, 1656.422776, 222.199959, X, Y) && !ellipse(29371.478729, 28986.772949, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(28256.831055, 31439.449188, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32856.018829, 14045.437607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31117.670000, 12469.846000, 2068.688060, 2068.688060, 0.000000, X, Y) && !ellipse(27390.662262, 19970.541702, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28222.984741, 15543.792770, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26677.009800, 21938.740000, 1536.192044, 1536.192044, 0.000000, X, Y) && !ellipse(25250.193200, 28419.257800, 763.880822, 763.880822, 0.000000, X, Y) && !ellipse(26113.051600, 21309.020000, 1204.192035, 1204.192035, 0.000000, X, Y) && !ellipse(32596.038361, 12154.286789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24513.362000, 23331.984000, 1223.408035, 1223.408035, 0.000000, X, Y) && !ellipse(26985.859200, 31321.557200, 860.368025, 860.368025, 0.000000, X, Y) && !ellipse(25901.238617, 30032.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.578278, 28753.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(22806.714355, 30727.213684, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26741.414673, 21437.016602, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23239.051361, 31006.196198, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24002.192000, 24015.696000, 2446.816070, 2446.816070, 0.000000, X, Y) && !ellipse(23940.324000, 24406.092000, 1189.744034, 1189.744034, 0.000000, X, Y) && !ellipse(44250.857635, 23880.363068, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.147522, 29186.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43884.399872, 21801.225555, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23470.015015, 25618.523132, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25287.154236, 23225.555847, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23374.626800, 25042.243400, 2397.104069, 1511.232043, 58.149000, X, Y) && !ellipse(28011.380000, 32294.502400, 1441.296041, 1441.296041, 0.000000, X, Y) && !ellipse(33910.673462, 13240.926559, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43796.340515, 23628.546814, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(43491.989197, 20569.562775, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(39150.630800, 16045.732800, 2126.256061, 2126.256061, 0.000000, X, Y) && !ellipse(32421.505600, 10650.842000, 2084.760060, 1013.800029, 356.043000, X, Y) && !ellipse(32506.616000, 10450.312000, 2140.632062, 2140.632062, 0.000000, X, Y)
[Mon Jun 17 06:01:26 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25.gif
[Mon Jun 17 06:10:37 2013] Mean detx,y = (-5762.15, -7868.95) 
[Mon Jun 17 06:10:41 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:22:09 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:22:09 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25_src_b10.pi.gz
[Mon Jun 17 06:22:09 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25_bgd.pi.gz
[Tue Jun 18 10:28:39 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:39 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25_src_b10.pi.gz = 131731.00
[Tue Jun 18 10:28:39 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25_bgd.pi.gz = 100539.00
[Tue Jun 18 10:28:39 2013] Got source and background scale factors 84608160.000000, 282355219.000000
[Tue Jun 18 10:28:39 2013] User source parameters:
  Position = (326.2, 188.6) = 20 47 43.40 30 4 57.3
  Extent = 44.0 (44.0-88.1)", rotation angle = 0
  Source aperture counts = 101604.3 +/- 363.9
  Background aperture counts = 30126.7
  Rate = 7 +/- 0.03

[Tue Jun 18 10:28:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:55 2013] Using photon index=1.80, rate=0.269, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25.arf
[Tue Jun 18 10:28:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:55 2013] Updating source flux to 3.9e-12
[Tue Jun 18 10:29:55 2013] Flag c found in src. 25 procflags, skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src25_pl.csv not found, spectral fit skipped or did not complete