[Mon Jun 17 00:55:01 2013] Detection parameters:
  Position = (352.2, 135.0) = 20 47 34.72 30 1 3.4
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 522.2 +/- 31.7
  Background counts = 82.6
  Rate = 0.04 +/- 0.002

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 12.48'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Setting initial spatial extent for simple fitting to maximum allowed for this pass
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 16 for pass 0, mean size = 12.67"
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src16.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src16.csv
[Mon Jun 17 00:56:51 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src16_1.ximg exists
[Mon Jun 17 00:56:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src16.csv
[Mon Jun 17 00:56:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src16_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src16.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src16.ximg exists
[Mon Jun 17 00:56:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src16_1.ximg exists
[Mon Jun 17 00:56:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src16 appears to have run properly
[Mon Jun 17 00:58:48 2013] Warning, spatial fit 16 centroid is now closest to src. 55
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 59
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 12.67 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 12.67"
[Mon Jun 17 00:59:53 2013] source mask rpix=2.9, npix_max = 46, mask sum = 42, frac = 0.902
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 12 for pass 1, mean size = 12.67"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src12.ximg exists
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src12_1.ximg exists
[Mon Jun 17 00:59:54 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src12 appears to have run properly
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src12.ximg exists
[Mon Jun 17 00:59:55 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src12_1.ximg exists
[Mon Jun 17 00:59:55 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src12 appears to have run properly
[Mon Jun 17 01:01:36 2013] Warning, spatial fit 12 centroid is now closest to src. 59
[Mon Jun 17 01:01:36 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:36 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:36 2013] Assessing source extent using major
[Mon Jun 17 01:01:36 2013] Source does appear to be extended
[Mon Jun 17 01:01:36 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:25 2013] XMMSAS src. selection expression = ellipse(30589.614136, 11693.732132, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 06:01:25 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22_src.reg
[Mon Jun 17 06:01:25 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (315, 97) - (390, 172)
[Mon Jun 17 06:01:25 2013] XMMSAS bgd. selection expression = annulus(30589.614136, 11693.732132, 1087.500000, 2175.000000, X, Y) && !ellipse(31308.870000, 14406.744000, 1928.984056, 1928.984056, 0.000000, X, Y) && !ellipse(30246.279022, 14485.281708, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32655.468536, 14474.575302, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29737.400177, 14484.710876, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29843.490000, 13389.146000, 1930.600056, 1038.424030, 49.554300, X, Y) && !ellipse(28334.500000, 16360.164000, 3522.688101, 3522.688101, 0.000000, X, Y) && !ellipse(29778.903595, 13965.356613, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32164.973114, 12994.734985, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31626.674200, 13667.098000, 4016.048116, 4016.048116, 0.000000, X, Y) && !ellipse(32361.670000, 13680.458000, 1862.848054, 1862.848054, 0.000000, X, Y) && !ellipse(27961.094000, 16826.262000, 3264.008094, 3264.008094, 0.000000, X, Y) && !ellipse(33141.009674, 12490.373672, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31838.492000, 12686.204000, 2008.024058, 2008.024058, 0.000000, X, Y) && !ellipse(32613.460663, 12567.941681, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30483.708306, 12752.511636, 1930.600056, 1044.960960, 50.596997, X, Y) && !ellipse(30247.826904, 13097.451431, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32856.018829, 14045.437607, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(31117.670000, 12469.846000, 2068.688060, 2068.688060, 0.000000, X, Y) && !ellipse(32596.038361, 12154.286789, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32421.505600, 10650.842000, 2084.760060, 1013.800029, 356.043000, X, Y) && !ellipse(32506.616000, 10450.312000, 2140.632062, 2140.632062, 0.000000, X, Y)
[Mon Jun 17 06:01:25 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22.gif
[Mon Jun 17 06:10:02 2013] Mean detx,y = (-9726.52, -11815.17) 
[Mon Jun 17 06:10:05 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 06:10:19 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 06:10:20 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22_src_b10.pi.gz
[Mon Jun 17 06:10:20 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.pi.gz
[Mon Jun 17 07:52:38 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 07:52:38 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:39 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:39 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22_src_b10.pi.gz = 1171.00
[Tue Jun 18 10:28:39 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22_bgd.pi.gz = 252.00
[Tue Jun 18 10:28:39 2013] Got source and background scale factors 1336000.000000, 746425.000000
[Tue Jun 18 10:28:39 2013] User source parameters:
  Position = (352.2, 135.0) = 20 47 34.72 30 1 3.4
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 720.0 +/- 35.2
  Background aperture counts = 451.0
  Rate = 0.05 +/- 0.003

[Tue Jun 18 10:28:39 2013] Updating counts from extracted products
[Tue Jun 18 10:28:39 2013] Set source signif. to 719.95/21.24 = 33.90
[Tue Jun 18 10:28:55 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:55 2013] Using photon index=1.80, rate=0.0527, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22.arf
[Tue Jun 18 10:28:55 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:55 2013] Updating source flux to 1.4e-12
[Tue Jun 18 10:29:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src22_pl.csv not found, spectral fit skipped or did not complete