[Mon Jun 17 00:54:58 2013] Detection parameters:
  Position = (325.3, 361.9) = 20 47 43.68 30 17 33.9
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 159.2 +/- 27.8
  Background counts = 261.9
  Rate = 0.02 +/- 0.003

[Mon Jun 17 00:55:09 2013] Off-axis axis estimate = 5.00'
[Mon Jun 17 00:56:50 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:50 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Mon Jun 17 00:56:50 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.576
[Mon Jun 17 00:56:50 2013] Giving source the simple spatial ID 41 for pass 0, mean size = 8.93"
[Mon Jun 17 00:56:52 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src41.ximg exists
[Mon Jun 17 00:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src41.csv
[Mon Jun 17 00:56:52 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src41_1.ximg exists
[Mon Jun 17 00:56:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src41.csv
[Mon Jun 17 00:56:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src41_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_src41.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src41.ximg exists
[Mon Jun 17 00:56:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src41_1.ximg exists
[Mon Jun 17 00:56:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src41 appears to have run properly
[Mon Jun 17 00:58:48 2013] Source 2 is offset by -2.383144 and -0.105733 pixels which is larger than
2 X fitted extent = 2.147476 x 2.147476, not incorporating fit results
[Mon Jun 17 00:58:49 2013] Source 2 is offset by -3.733321 and 6.460244 pixels which is larger than
2 X fitted extent = 1.026258 x 1.026258, not incorporating fit results
[Mon Jun 17 00:58:49 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:49 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:49 2013] Assessing source extent using major
[Mon Jun 17 00:58:49 2013] Source does appear to be extended
[Mon Jun 17 00:58:49 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:49 2013] Source is confused with source 63
[Mon Jun 17 00:59:53 2013] Using EEF radius (= 8.93 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:53 2013] Initial guess for spatial extent in simple fitting = 8.93"
[Mon Jun 17 00:59:53 2013] source mask rpix=2.1, npix_max = 26, mask sum = 15, frac = 0.576
[Mon Jun 17 00:59:53 2013] Giving source the simple spatial ID 33 for pass 1, mean size = 8.93"
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src33.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src33.csv
[Mon Jun 17 00:59:54 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src33_1.ximg exists
[Mon Jun 17 00:59:54 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src33.csv
[Mon Jun 17 00:59:54 2013] It looks like the fit did not converge
You should probably delete fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src33.ximg exists
[Mon Jun 17 00:59:56 2013] fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src33_1.ximg exists
[Mon Jun 17 00:59:56 2013] Fit fullrun_mos2_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src33 appears to have run properly
[Mon Jun 17 01:01:36 2013] Source 2 is offset by -2.306540 and -0.165642 pixels which is larger than
2 X fitted extent = 2.037347 x 2.037347, not incorporating fit results
[Mon Jun 17 01:01:37 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:37 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:37 2013] Assessing source extent using major
[Mon Jun 17 01:01:37 2013] Source does appear to be extended
[Mon Jun 17 01:01:37 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 06:01:27 2013] XMMSAS src. selection expression = ellipse(28256.831055, 31439.449188, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 06:01:27 2013] Writing source region out to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2_src.reg
[Mon Jun 17 06:01:27 2013] Extracting stamp from image fullrun_mos2_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (288, 324) - (363, 399)
[Mon Jun 17 06:01:27 2013] XMMSAS bgd. selection expression = annulus(28256.831055, 31439.449188, 1087.500000, 2175.000000, X, Y) && !ellipse(28604.491211, 31846.536865, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25006.108000, 29917.774000, 1323.488038, 1323.488038, 0.000000, X, Y) && !ellipse(25225.974000, 29488.974000, 1303.048037, 1303.048037, 0.000000, X, Y) && !ellipse(27590.806335, 30561.120361, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23652.825552, 30922.847485, 3302.720095, 1656.422776, 222.199959, X, Y) && !ellipse(29371.478729, 28986.772949, 1740.000000, 1740.000000, 0.000000, X, Y) && !ellipse(26985.859200, 31321.557200, 860.368025, 860.368025, 0.000000, X, Y) && !ellipse(25901.238617, 30032.668640, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(25811.578278, 28753.860504, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26279.147522, 29186.590454, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28011.380000, 32294.502400, 1441.296041, 1441.296041, 0.000000, X, Y)
[Mon Jun 17 06:01:27 2013] Writing fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2.gif
[Mon Jun 17 07:08:36 2013] Mean detx,y = (1772.89, 4326.18) 
[Mon Jun 17 07:08:37 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 07:08:49 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 07:08:49 2013] Setting source spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2_src_b10.pi.gz
[Mon Jun 17 07:08:49 2013] Setting bgd. spectrum file to fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2_bgd.pi.gz
[Mon Jun 17 08:54:31 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 08:54:31 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:45 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:45 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2_src_b10.pi.gz = 2185.00
[Tue Jun 18 10:28:45 2013] Total counts from fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2_bgd.pi.gz = 3434.00
[Tue Jun 18 10:28:45 2013] Got source and background scale factors 1247764.000000, 2580488.000000
[Tue Jun 18 10:28:45 2013] User source parameters:
  Position = (325.3, 361.9) = 20 47 43.68 30 17 33.9
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 524.5 +/- 47.8
  Background aperture counts = 1660.5
  Rate = 0.04 +/- 0.003

[Tue Jun 18 10:28:45 2013] Updating counts from extracted products
[Tue Jun 18 10:28:45 2013] Set source signif. to 524.53/40.75 = 12.87
[Tue Jun 18 10:28:56 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:56 2013] Using photon index=1.80, rate=0.0384, arf fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2.arf
[Tue Jun 18 10:28:56 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:56 2013] Updating source flux to 6.3e-13
[Tue Jun 18 10:29:55 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:30:31 2013] xmm0082540701/analysis//spectral/fullrun_mos2_xmm0082540701_pi300-10000_pass1_cl_src2_pl.csv not found, spectral fit skipped or did not complete