[Mon Jun 17 00:54:54 2013] Detection parameters:
  Position = (309.2, 250.0) = 20 47 49.09 30 9 30.0
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 130.7 +/- 29.8
  Background counts = 386.8
  Rate = 0.01 +/- 0.003

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 3.60'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Jun 17 00:56:41 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 93 for pass 0, mean size = 8.23"
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src93.ximg exists
[Mon Jun 17 00:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src93.csv
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src93_1.ximg exists
[Mon Jun 17 00:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src93.csv
[Mon Jun 17 00:56:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src93_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src93.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src93.ximg exists
[Mon Jun 17 00:56:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src93_1.ximg exists
[Mon Jun 17 00:56:49 2013] Fit fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src93 appears to have run properly
[Mon Jun 17 00:58:16 2013] Warning, spatial fit 93 centroid is now closest to src. 98
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:45 2013] Using EEF radius (= 8.23 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 8.23"
[Mon Jun 17 00:59:45 2013] source mask rpix=1.9, npix_max = 22, mask sum = 20, frac = 0.874
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 74 for pass 1, mean size = 8.23"
[Mon Jun 17 00:59:48 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src74.ximg exists
[Mon Jun 17 00:59:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src74.csv
[Mon Jun 17 00:59:48 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src74_1.ximg exists
[Mon Jun 17 00:59:48 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src74.csv
[Mon Jun 17 00:59:48 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src74_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src74.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:52 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src74.ximg exists
[Mon Jun 17 00:59:52 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src74_1.ximg exists
[Mon Jun 17 00:59:52 2013] Fit fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src74 appears to have run properly
[Mon Jun 17 01:01:10 2013] Source 94 is offset by -7.311350 and 1.146021 pixels which is larger than
2 X fitted extent = 4.311485 x 4.311485, not incorporating fit results
[Mon Jun 17 01:01:10 2013] Warning: source 77 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 94 at 41.284452 pixels away
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:28 2013] XMMSAS src. selection expression = ellipse(26856.130524, 21701.569031, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:03:28 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94_src.reg
[Mon Jun 17 01:03:28 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (272, 213) - (347, 288)
[Mon Jun 17 01:03:28 2013] XMMSAS bgd. selection expression = annulus(26856.130524, 21701.569031, 1087.500000, 2175.000000, X, Y) && !ellipse(27562.920563, 18893.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.550000, 18246.014000, 1804.088052, 548.191216, 123.760000, X, Y) && !ellipse(27576.770000, 20746.514000, 1374.064040, 1374.064040, 0.000000, X, Y) && !ellipse(27521.908000, 19183.044000, 936.960027, 936.960027, 0.000000, X, Y) && !ellipse(26404.298400, 20207.460800, 1408.760041, 1408.760041, 0.000000, X, Y) && !ellipse(25446.401400, 22549.988800, 1249.528036, 1249.528036, 0.000000, X, Y) && !ellipse(27299.738129, 20921.364777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(23719.238000, 24556.360000, 1209.024035, 1209.024035, 0.000000, X, Y) && !ellipse(27830.792800, 20873.882000, 1368.064039, 1368.064039, 0.000000, X, Y) && !ellipse(24020.726000, 24243.796000, 1190.184034, 1190.184034, 0.000000, X, Y) && !ellipse(23492.470000, 24957.808000, 2380.368068, 2380.368068, 0.000000, X, Y) && !ellipse(24779.960000, 23146.914000, 2499.056072, 2499.056072, 0.000000, X, Y)
[Mon Jun 17 01:03:28 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94.gif
[Mon Jun 17 01:22:12 2013] Mean detx,y = (-4671.99, 1473.06) 
[Mon Jun 17 01:22:15 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 01:22:28 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 01:22:29 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94_src_b10.pi.gz
[Mon Jun 17 01:22:29 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94_bgd.pi.gz
[Mon Jun 17 05:49:03 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 05:49:03 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:28 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:28 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94_src_b10.pi.gz = 3562.00
[Tue Jun 18 10:28:28 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94_bgd.pi.gz = 4790.00
[Tue Jun 18 10:28:28 2013] Got source and background scale factors 1344000.000000, 1985147.000000
[Tue Jun 18 10:28:28 2013] User source parameters:
  Position = (309.2, 250.0) = 20 47 49.09 30 9 30.0
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 319.0 +/- 60.7
  Background aperture counts = 3243.0
  Rate = 0.02 +/- 0.004

[Tue Jun 18 10:28:28 2013] Updating counts from extracted products
[Tue Jun 18 10:28:28 2013] Set source signif. to 319.04/56.95 = 5.60
[Tue Jun 18 10:28:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:35 2013] Using photon index=1.80, rate=0.0234, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94.arf
[Tue Jun 18 10:28:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:35 2013] Updating source flux to 3.2e-13
[Tue Jun 18 10:29:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src94_pl.csv not found, spectral fit skipped or did not complete