[Mon Jun 17 00:54:47 2013] Detection parameters:
  Position = (477.9, 201.9) = 20 46 52.57 30 5 53.2
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 142.2 +/- 22.7
  Background counts = 114.2
  Rate = 0.01 +/- 0.002

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 14.77'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 13.81"
[Mon Jun 17 00:56:41 2013] source mask rpix=3.2, npix_max = 54, mask sum = 63, frac = 1.166
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 97 for pass 0, mean size = 13.81"
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src97.ximg exists
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src97_1.ximg exists
[Mon Jun 17 00:56:46 2013] Fit fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src97 appears to have run properly
[Mon Jun 17 00:56:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src97.ximg exists
[Mon Jun 17 00:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src97.csv
[Mon Jun 17 00:56:50 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src97_1.ximg exists
[Mon Jun 17 00:56:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src97.csv
[Mon Jun 17 00:56:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src97_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src97.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:16 2013] Warning: source 97 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 56 at 10.119479 pixels away
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:59:45 2013] Using EEF radius (= 13.81 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 13.81"
[Mon Jun 17 00:59:45 2013] source mask rpix=3.2, npix_max = 54, mask sum = 63, frac = 1.166
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 78 for pass 1, mean size = 13.81"
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src78.ximg exists
[Mon Jun 17 00:59:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src78.csv
[Mon Jun 17 00:59:49 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src78_1.ximg exists
[Mon Jun 17 00:59:49 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src78.csv
[Mon Jun 17 00:59:49 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:52 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src78.ximg exists
[Mon Jun 17 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src78.csv
[Mon Jun 17 00:59:52 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src78_1.ximg exists
[Mon Jun 17 00:59:52 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src78.csv
[Mon Jun 17 00:59:52 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src78_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src78.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:10 2013] Spatial fit model total counts = 2220.510000, observed total counts = 1900.000000
[Mon Jun 17 01:01:10 2013] Poor agreement between spatial fit and data for source 56
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:01:11 2013] Source 56 is offset by 1.628633 and 6.302313 pixels which is larger than
2 X fitted extent = 1.588363 x 1.588363, not incorporating fit results
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:28 2013] XMMSAS src. selection expression = ellipse(41525.855042, 17520.349243, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:03:28 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56_src.reg
[Mon Jun 17 01:03:28 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (440, 164) - (515, 239)
[Mon Jun 17 01:03:28 2013] XMMSAS bgd. selection expression = annulus(41525.855042, 17520.349243, 1087.500000, 2175.000000, X, Y)
[Mon Jun 17 01:03:28 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56.gif
[Mon Jun 17 01:36:47 2013] Mean detx,y = (-1428.06, 16332.89) 
[Mon Jun 17 01:36:49 2013] Setting backscal keywords in source and bgd. spectrum
[Mon Jun 17 01:37:20 2013] Binned source spectrum to 10 counts/bin
[Mon Jun 17 01:37:21 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56_src_b10.pi.gz
[Mon Jun 17 01:37:21 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56_bgd.pi.gz
[Mon Jun 17 05:55:19 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 05:55:19 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:29 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:29 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56_src_b10.pi.gz = 1036.00
[Tue Jun 18 10:28:29 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56_bgd.pi.gz = 4685.00
[Tue Jun 18 10:28:29 2013] Got source and background scale factors 1197392.000000, 5359993.000000
[Tue Jun 18 10:28:29 2013] User source parameters:
  Position = (477.9, 201.9) = 20 46 52.57 30 5 53.2
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = -10.6 +/- 33.2
  Background aperture counts = 1046.6
  Rate = -0.0008 +/- 0.002

[Tue Jun 18 10:28:29 2013] Updating counts from extracted products
[Tue Jun 18 10:28:29 2013] Set source signif. to -10.60/32.35 = -0.33
[Tue Jun 18 10:28:35 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:35 2013] Using photon index=1.80, rate=-0.000776, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56.arf
[Tue Jun 18 10:28:35 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:35 2013] Updated flux is not positive, keeping original flux
[Tue Jun 18 10:29:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src56_pl.csv not found, spectral fit skipped or did not complete