[Mon Jun 17 00:54:46 2013] Detection parameters:
  Position = (317.4, 217.7) = 20 47 46.37 30 7 11.7
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 197.2 +/- 27.7
  Background counts = 361.1
  Rate = 0.03 +/- 0.004

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 6.01'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Mon Jun 17 00:56:41 2013] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.807
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 33 for pass 0, mean size = 9.43"
[Mon Jun 17 00:56:44 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src33.ximg exists
[Mon Jun 17 00:56:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src33.csv
[Mon Jun 17 00:56:44 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src33_1.ximg exists
[Mon Jun 17 00:56:44 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src33.csv
[Mon Jun 17 00:56:44 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:47 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33.ximg exists
[Mon Jun 17 00:56:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jun 17 00:56:47 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg exists
[Mon Jun 17 00:56:47 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33.csv
[Mon Jun 17 00:56:47 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src33.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:16 2013] Warning, spatial fit 33 centroid is now closest to src. 54
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:16 2013] Source is confused with source 102
[Mon Jun 17 00:59:45 2013] Using EEF radius (= 9.43 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 9.43"
[Mon Jun 17 00:59:45 2013] source mask rpix=2.2, npix_max = 28, mask sum = 23, frac = 0.807
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 28 for pass 1, mean size = 9.43"
[Mon Jun 17 00:59:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src28.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src28.csv
[Mon Jun 17 00:59:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src28_1.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src28.csv
[Mon Jun 17 00:59:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:50 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src28.ximg exists
[Mon Jun 17 00:59:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src28.csv
[Mon Jun 17 00:59:50 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg exists
[Mon Jun 17 00:59:51 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src28.csv
[Mon Jun 17 00:59:51 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src28_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src28.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:10 2013] Warning, spatial fit 28 centroid is now closest to src. 106
[Mon Jun 17 01:01:10 2013] Warning: source 36 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 12.700927 pixels away
[Mon Jun 17 01:01:10 2013] Warning: source 39 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 17.597637 pixels away
[Mon Jun 17 01:01:10 2013] Warning: source 70 in spatial fitting list does not appear to have a counterpart in memory, closest src. was src. 53 at 11.701661 pixels away
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:23 2013] XMMSAS src. selection expression = ellipse(27562.920563, 18893.915375, 652.500000, 652.500000, 0.000000, X, Y)
[Mon Jun 17 01:03:23 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src.reg
[Mon Jun 17 01:03:23 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (280, 180) - (355, 255)
[Mon Jun 17 01:03:23 2013] XMMSAS bgd. selection expression = annulus(27562.920563, 18893.915375, 1087.500000, 2175.000000, X, Y) && !ellipse(28919.114838, 15875.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29442.129059, 17822.925674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.676000, 16481.892000, 1476.600042, 1476.600042, 0.000000, X, Y) && !ellipse(27836.720459, 16722.439926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30346.134000, 16482.450000, 1470.144042, 1470.144042, 0.000000, X, Y) && !ellipse(28836.519531, 16391.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.352000, 17066.840000, 1692.368049, 1692.368049, 0.000000, X, Y) && !ellipse(28197.242600, 18417.691200, 595.071217, 595.071217, 0.000000, X, Y) && !ellipse(29659.459137, 16924.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.519928, 18649.000870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28978.369781, 17110.291916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30571.990051, 17644.913925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.550000, 18246.014000, 1804.088052, 548.191216, 123.760000, X, Y) && !ellipse(27576.770000, 20746.514000, 1374.064040, 1374.064040, 0.000000, X, Y) && !ellipse(32069.702000, 13883.470000, 3873.136111, 3873.136111, 0.000000, X, Y) && !ellipse(30726.611400, 17304.410000, 1730.856050, 1730.856050, 0.000000, X, Y) && !ellipse(27521.908000, 19183.044000, 936.960027, 936.960027, 0.000000, X, Y) && !ellipse(29111.441000, 17691.550000, 1643.480047, 1643.480047, 0.000000, X, Y) && !ellipse(27653.265900, 16904.813889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.298400, 20207.460800, 1408.760041, 1408.760041, 0.000000, X, Y) && !ellipse(27299.738129, 20921.364777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.792800, 20873.882000, 1368.064039, 1368.064039, 0.000000, X, Y) && !ellipse(26856.130524, 21701.569031, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(24779.960000, 23146.914000, 2499.056072, 2499.056072, 0.000000, X, Y)
[Mon Jun 17 01:03:23 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53.gif
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src.evt and ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_bgd.evt exist, delete to re-create
[Mon Jun 17 01:03:32 2013] Mean detx,y = (-6828.44, 3423.49) 
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src.img and ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_bgd.img exist, delete to re-create
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_bgd.pi exist, delete to re-create
[Mon Jun 17 01:03:32 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src_b10.pi.gz
[Mon Jun 17 01:03:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_bgd.pi.gz
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_bgd.lc exist, delete to re-create
[Mon Jun 17 03:11:51 2013] Not generating rmf since RequireSpatial is true but spatial fitting not done
[Mon Jun 17 03:11:51 2013] rmf not generated due to insufficient counts
[Tue Jun 18 10:28:11 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:11 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_src_b10.pi.gz = 3133.00
[Tue Jun 18 10:28:11 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_bgd.pi.gz = 3462.00
[Tue Jun 18 10:28:11 2013] Got source and background scale factors 1233456.000000, 1889268.000000
[Tue Jun 18 10:28:11 2013] User source parameters:
  Position = (317.4, 217.7) = 20 47 46.37 30 7 11.7
  Extent = 10.9" x 10.9", rotation angle = 0
  Source aperture counts = 872.7 +/- 57.0
  Background aperture counts = 2260.3
  Rate = 0.06 +/- 0.004

[Tue Jun 18 10:28:11 2013] Updating counts from extracted products
[Tue Jun 18 10:28:11 2013] Set source signif. to 872.75/47.54 = 18.36
[Tue Jun 18 10:28:32 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:32 2013] Using photon index=1.80, rate=0.0639, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53.arf
[Tue Jun 18 10:28:32 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:32 2013] Updating source flux to 1.2e-12
[Tue Jun 18 10:29:04 2013] Simple spatial fitting not done (or not done successfully), skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src53_pl.csv not found, spectral fit skipped or did not complete