[Mon Jun 17 00:54:43 2013] Detection parameters:
  Position = (350.7, 194.9) = 20 47 35.19 30 5 24.8
  Extent = 10.9" x 10.9", rotation angle = 0 degrees
  Source counts = 272.4 +/- 33.2
  Background counts = 355.3
  Rate = 0.03 +/- 0.004

[Mon Jun 17 00:54:58 2013] Off-axis axis estimate = 8.41'
[Mon Jun 17 00:56:41 2013] Using EEF radius (= 10.63 ")to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:56:41 2013] Initial guess for spatial extent in simple fitting = 10.63"
[Mon Jun 17 00:56:41 2013] source mask rpix=2.4, npix_max = 34, mask sum = 36, frac = 1.038
[Mon Jun 17 00:56:41 2013] Giving source the simple spatial ID 17 for pass 0, mean size = 10.63"
[Mon Jun 17 00:56:43 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src17.ximg exists
[Mon Jun 17 00:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src17.csv
[Mon Jun 17 00:56:43 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src17_1.ximg exists
[Mon Jun 17 00:56:43 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src17.csv
[Mon Jun 17 00:56:43 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17.ximg exists
[Mon Jun 17 00:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 17 00:56:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg exists
[Mon Jun 17 00:56:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17.csv
[Mon Jun 17 00:56:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass0_tfrozen_src17.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:58:15 2013] Spatial fit model total counts = 5647.780000, observed total counts = 5623.000000
[Mon Jun 17 00:58:15 2013] Offset between fit and detection position for source 23 = 5.108066 pixels
[Mon Jun 17 00:58:15 2013] Warning, changing simple spatial fit ID from 17 to 5
[Mon Jun 17 00:58:15 2013] 5479.859000 total counts/ 4497.540000 bgd. counts: snr = 14.647551
Spatial fit parameters:
  Offset between fit and detection position for source 23 = 5.108066 pixels
  Position = (349.4, 190.0) = 20 47 35.65 30 5 3.4
  Extent = 18.4 (14.7-22.0)", rotation angle = 0
  Source counts = 982.3 +/- 74.0
  Background counts = 4497.5
  Rate = 0.07 +/- 0.005
[Mon Jun 17 00:58:15 2013] Spatial fit model total counts = 5346.680000, observed total counts = 4643.000000
[Mon Jun 17 00:58:15 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 00:58:16 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 00:58:16 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 00:58:16 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 00:58:16 2013] Source does appear to be extended
[Mon Jun 17 00:58:16 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 00:58:16 2013] Source is confused with source 4
[Mon Jun 17 00:59:45 2013] Using previous fit value to estimate initial spatial extent for simple fitting
[Mon Jun 17 00:59:45 2013] Initial guess for spatial extent in simple fitting = 18.38"
[Mon Jun 17 00:59:45 2013] source mask rpix=4.2, npix_max = 89, mask sum = 86, frac = 0.963
[Mon Jun 17 00:59:45 2013] Giving source the simple spatial ID 13 for pass 1, mean size = 18.38"
[Mon Jun 17 00:59:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src13.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src13.csv
[Mon Jun 17 00:59:46 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src13_1.ximg exists
[Mon Jun 17 00:59:46 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src13.csv
[Mon Jun 17 00:59:46 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 00:59:50 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13.ximg exists
[Mon Jun 17 00:59:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Jun 17 00:59:50 2013] fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg exists
[Mon Jun 17 00:59:50 2013] Warning: poor agreement between model and actual number of counts may be indicative of a poor fit in csv/fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13.csv
[Mon Jun 17 00:59:50 2013] It looks like the fit did not converge
You should probably delete fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13_1.ximg
Either tweak this fit manually starting from fullrun_mos1_xmm0082540701_pi300-10000_cl_pass1_tfrozen_src13.ximg or adjust the simplespatial fit parameters in $XASSIST/data/missions/*/*/spatial.dat and re-run simplespatial fitting after setting file recreation parameter to yes
[Mon Jun 17 01:01:10 2013] Warning, spatial fit 13 centroid is now closest to src. 5
[Mon Jun 17 01:01:10 2013] Spatial fit model total counts = 16201.500000, observed total counts = 14546.000000
[Mon Jun 17 01:01:10 2013] Poor agreement between spatial fit and data for source 23
It may help to tweak spatial fit manually
Not incorporating fit results
[Mon Jun 17 01:01:11 2013] Vigneting correction estimate = 1.000000
[Mon Jun 17 01:01:11 2013] Source flux estimate in the 0.3-8.0 bandpass, Gamma=1.800000 = 0 
[Mon Jun 17 01:01:11 2013] Assessing source extent using major axis lower bound
[Mon Jun 17 01:01:11 2013] Source does appear to be extended
[Mon Jun 17 01:01:11 2013] Computing asymmetry using major and minor axis, asym = 1.00
[Mon Jun 17 01:03:21 2013] XMMSAS src. selection expression = ellipse(30346.134000, 16482.450000, 1102.608032, 1102.608032, 0.000000, X, Y)
[Mon Jun 17 01:03:21 2013] Not overwriting source region fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src.reg
[Mon Jun 17 01:03:21 2013] Extracting stamp from image fullrun_mos1_xmm0082540701_pi300-10000_cl_sm2.00.img.gz, (286, 127) - (413, 253)
[Mon Jun 17 01:03:22 2013] XMMSAS bgd. selection expression = annulus(30346.134000, 16482.450000, 1837.680053, 3675.360106, X, Y) && !ellipse(31638.442000, 14574.872000, 1927.408055, 1927.408055, 0.000000, X, Y) && !ellipse(31544.592000, 15903.932000, 992.128029, 992.128029, 0.000000, X, Y) && !ellipse(30706.955811, 15980.230469, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28919.114838, 15875.632935, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29442.129059, 17822.925674, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29847.214844, 14305.072922, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32401.169830, 13002.800964, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28437.676000, 16481.892000, 1476.600042, 1476.600042, 0.000000, X, Y) && !ellipse(27836.720459, 16722.439926, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32459.896423, 13506.728180, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28836.519531, 16391.043152, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30942.961365, 16658.313004, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30384.823761, 15268.979980, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28387.352000, 17066.840000, 1692.368049, 1692.368049, 0.000000, X, Y) && !ellipse(32593.638000, 14880.412000, 1015.448029, 452.204813, 293.804000, X, Y) && !ellipse(28197.242600, 18417.691200, 595.071217, 595.071217, 0.000000, X, Y) && !ellipse(32225.491852, 12221.992691, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27562.920563, 18893.915375, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29659.459137, 16924.678818, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26827.519928, 18649.000870, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28978.369781, 17110.291916, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33012.980000, 13135.744000, 1936.568056, 1936.568056, 0.000000, X, Y) && !ellipse(31159.302000, 13034.878000, 1999.640058, 1999.640058, 0.000000, X, Y) && !ellipse(30571.990051, 17644.913925, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28110.550000, 18246.014000, 1804.088052, 548.191216, 123.760000, X, Y) && !ellipse(33289.208099, 12653.097763, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27576.770000, 20746.514000, 1374.064040, 1374.064040, 0.000000, X, Y) && !ellipse(32069.702000, 13883.470000, 3873.136111, 3873.136111, 0.000000, X, Y) && !ellipse(30555.004000, 12608.724000, 1938.544056, 1938.544056, 0.000000, X, Y) && !ellipse(30726.611400, 17304.410000, 1730.856050, 1730.856050, 0.000000, X, Y) && !ellipse(31433.231110, 12658.625534, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27521.908000, 19183.044000, 936.960027, 936.960027, 0.000000, X, Y) && !ellipse(29221.517365, 14999.904709, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32603.326416, 14050.531281, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(29111.441000, 17691.550000, 1643.480047, 1643.480047, 0.000000, X, Y) && !ellipse(27653.265900, 16904.813889, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(30610.857025, 13782.648117, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(28578.848938, 15204.876953, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(32914.796000, 13352.988000, 1936.568056, 1339.536039, 134.069000, X, Y) && !ellipse(29694.617035, 13614.033844, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(26404.298400, 20207.460800, 1408.760041, 1408.760041, 0.000000, X, Y) && !ellipse(29525.118600, 14116.042000, 1669.240048, 1669.240048, 0.000000, X, Y) && !ellipse(30229.390381, 13440.092255, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(33483.080000, 14812.244000, 1968.488057, 1968.488057, 0.000000, X, Y) && !ellipse(27299.738129, 20921.364777, 870.000000, 870.000000, 0.000000, X, Y) && !ellipse(27830.792800, 20873.882000, 1368.064039, 1368.064039, 0.000000, X, Y) && !ellipse(30887.593384, 12224.380890, 870.000000, 870.000000, 0.000000, X, Y)
[Mon Jun 17 01:03:22 2013] Writing fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23.gif
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src.evt and ../../xmm0082540701/products/events/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_bgd.evt exist, delete to re-create
[Mon Jun 17 01:03:32 2013] Mean detx,y = (-7641.35, 7068.70) 
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src.img and ../../xmm0082540701/products/images/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_bgd.img exist, delete to re-create
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src_b10.pi.gz and ../../xmm0082540701/products/spectra/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_bgd.pi exist, delete to re-create
[Mon Jun 17 01:03:32 2013] Setting source spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src_b10.pi.gz
[Mon Jun 17 01:03:32 2013] Setting bgd. spectrum file to fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_bgd.pi.gz
[Mon Jun 17 01:03:32 2013] ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src.lc and ../../xmm0082540701/products/lightcurves/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_bgd.lc exist, delete to re-create
[Tue Jun 18 10:28:05 2013] Updating aperture counts using extracted products
[Tue Jun 18 10:28:05 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_src_b10.pi.gz = 9422.00
[Tue Jun 18 10:28:06 2013] Total counts from fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_bgd.pi.gz = 11009.00
[Tue Jun 18 10:28:06 2013] Got source and background scale factors 3380412.000000, 6612638.000000
[Tue Jun 18 10:28:06 2013] User source parameters:
  Position = (349.4, 190.0) = 20 47 35.65 30 5 3.4
  Extent = 18.4 (14.7-22.0)", rotation angle = 0
  Source aperture counts = 3794.1 +/- 98.1
  Background aperture counts = 5627.9
  Rate = 0.3 +/- 0.007

[Tue Jun 18 10:28:31 2013] Calculating source flux in energy range 0.30-8.00
[Tue Jun 18 10:28:31 2013] Using photon index=1.80, rate=0.0719, arf fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23.arf
[Tue Jun 18 10:28:31 2013] Assuming count rate is from the 0.30-10.00 bandpass
[Tue Jun 18 10:28:31 2013] Updating source flux to 1.3e-12
[Tue Jun 18 10:29:04 2013] Flag p found in src. 23 procflags, skipping spectral fitting
[Tue Jun 18 10:29:04 2013] Flag c found in src. 23 procflags, skipping spectral fitting
[Tue Jun 18 10:29:55 2013] xmm0082540701/analysis//spectral/fullrun_mos1_xmm0082540701_pi300-10000_pass1_cl_src23_pl.csv not found, spectral fit skipped or did not complete